Claus Guttesen <cguttesen_at_yahoo.dk> writes: > After the RAID-cabinet has initialized the disks and I > issue the camcontrol rescan all the output is > > da2 at ahc1 bus 0 target 0 lun 0 > da2: <SB-3140 0001> Fixed Direct Access SCSI-3 device > > da2: 160.000MB/s transfers (80.000MHz, offset 31, > 16bit), Tagged Queueing Enabled > da2: 764496MB (1565687808 512 byte sectors: 255H 63S/T > 97459C) > > So it's allready at this stage that the (lower) size > is showing up. da1 has 267,348 cylinders and da2 only > has 97,459. this is most likely a bug in your IDE-to-SCSI enclosure's firmware. you should check with the vendor that it actually supports 250 GB disks. DES -- Dag-Erling Smørgrav - des_at_des.noReceived on Thu Sep 16 2004 - 12:21:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:12 UTC