On Sat, Sep 18, 2004 at 01:11:13AM +0200, Andre Oppermann wrote: > I'm unable to reproduce your problem. > > Usually in these cases there is an ethernet duplex mismatch somewhere. > Can set the network cards and the switches to fixed 1000 or 100 full-duplex? Yes, one of my first tests. Both machines fixed to their nominal transfer rate. Tested different ports, different irons (source and target), different cables. Always same result. All channels are able to do their maximum speed. Changing target and source (100 -> 1000) resulted in >10MBytes/sec, same machines, same cables, same everything 1000 -> 100 resulted in what we discuss here (300kBytes). 100->100 (between the two PE350) is working fine, too. The problematic case (1000 -> 100) was tested with 3 machines 5.x and 2 machines 4.x, all cases the same. I'm not sure this is a "physical" problem. I will try something else next days: * New cables * FreesBIE with 4.10 on the 5.3-Boxes, ftp'in /dev/zero directly to /dev/null ... * throtteling 1000MBit ... maybe Maybe: * another GBit-Switch (if available) Workaround: * Buy 1000MBit-Cards for the both "Router"-boxes Regards Raphael BeckerReceived on Fri Sep 17 2004 - 21:39:31 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:12 UTC