I previously wrote: >> > Booting 3.5-BETA5-i386-disc2 in "safe mode" worked, but the system did > not seem to see my floppy disk drive and consequently I was unable to > copy my dmesg and pciconf output anywhere. With some extra effort, I > might be able to transfer the stuff via a hard disk partition. > > Is there any useful diagnostic information that I might produce for anyone? >> and Nate Lawson responded: >> > How about a dmesg (or at least any part with fd* in it) to see what's > wrong with the floppy? >> Here is the dmesg output from when using the 3.5-BETA5-i386-disc2.iso live file system in fixit mode after booting the 3.5-BETA5-i386-disc1.iso image in safe mode. There appears to be no mention at all of the floppy disk. I have also appended output from "pciconf -lv", the output from "pnpinfo", and for comparison the part of the dmesg from a release 4.10 boot that includes the floppy information. -------------------------------------------------------------- dmesg output: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA5 #0: Sun Sep 19 02:35:12 UTC 2004 root_at_wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2813.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073676288 (1023 MB) avail memory = 1036943360 (988 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xd8000000-0xdfffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <PCIBIOS PCI-PCI bridge> at device 3.0 on pci0 pci2: <PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 0x9000-0x901f mem 0xf6000000-0xf601ffff irq 5 at device 1.0 on pci2 em0: Ethernet address: 00:20:ed:78:c7:71 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 5 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 5 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 9 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci3: <PCI bus> on pcib3 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x8000-0x80ff mem 0xf5005000-0xf5005fff irq 10 at device 1.0 on pci3 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcib4: <PCI-PCI bridge> at device 2.0 on pci3 pci4: <PCI bus> on pcib4 ahc1: <Adaptec 3940 SCSI adapter> port 0x7000-0x70ff mem 0xf4000000-0xf4000fff irq 11 at device 4.0 on pci4 ahc1: [GIANT-LOCKED] aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs ahc2: <Adaptec 3940 SCSI adapter> port 0x7400-0x74ff mem 0xf4001000-0xf4001fff irq 9 at device 5.0 on pci4 ahc2: [GIANT-LOCKED] aic7870: Single Channel B, SCSI Id=7, 16/253 SCBs fwohci0: <Texas Instruments TSB43AB23> mem 0xf5000000-0xf5003fff,0xf5004000-0xf50047ff irq 11 at device 10.0 on pci3 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:20:ed:0a:00:81:c1:33 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:20:ed:81:c1:33 fwe0: Ethernet address: 02:20:ed:81:c1:33 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 atapci1: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 5 at device 31.2 on pci0 ata2: channel #0 on atapci1 ata3: channel #1 on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) cpu0 on motherboard orm0: <ISA Option ROMs> at iomem 0xd1000-0xd37ff,0xd0000-0xd07ff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) ahc3: No resources allocated. ahc3: No resources allocated. ahc3: No resources allocated. unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 2813537708 Hz quality 800 Timecounters tick every 10.000 msec md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09b68a4 ad0: 78166MB <Maxtor 6Y080L0/YAR41BW0> [158813/16/63] at ata0-master PIO4 ad1: 78167MB <Maxtor 4R080L0/RAMC1TU0> [158816/16/63] at ata0-slave PIO4 ATAPI_RESET time = 80us acd0: CDRW <SAMSUNG CDRW/DVD SM-352B/T806> at ata1-master PIO4 em0: Link is up 100 Mbps Full Duplex ad4: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata2-master SATA150 ad6: 114473MB <ST3120026AS/3.05> [232581/16/63] at ata3-master SATA150 Waiting 15 seconds for SCSI devices to settle da0 at ahc1 bus 0 target 0 lun 0 da0: <QUANTUM FIREBALL ST3.2S 0F0C> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 3118MB (6385696 512 byte sectors: 255H 63S/T 397C) Mounting root from ufs:/dev/md0 -------------------------------------------------------------- pciconf -lv output: agp0_at_pci0:0:0: class=0x060000 card=0x25781458 chip=0x25788086 rev=0x02 hdr=0x00 class = bridge subclass = HOST-PCI pcib1_at_pci0:1:0: class=0x060400 card=0x00000000 chip=0x25798086 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI pcib2_at_pci0:3:0: class=0x060400 card=0x00000000 chip=0x257b8086 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI uhci0_at_pci0:29:0: class=0x0c0300 card=0x24d21458 chip=0x24d28086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci1_at_pci0:29:1: class=0x0c0300 card=0x24d21458 chip=0x24d48086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci2_at_pci0:29:2: class=0x0c0300 card=0x24d21458 chip=0x24d78086 rev=0x02 hdr=0x00 class = serial bus subclass = USB uhci3_at_pci0:29:3: class=0x0c0300 card=0x24d21458 chip=0x24de8086 rev=0x02 hdr=0x00 class = serial bus subclass = USB none0_at_pci0:29:7: class=0x0c0320 card=0x50061458 chip=0x24dd8086 rev=0x02 hdr=0x00 class = serial bus subclass = USB pcib3_at_pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01 class = bridge subclass = PCI-PCI isab0_at_pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00 class = bridge subclass = PCI-ISA atapci0_at_pci0:31:1: class=0x01018a card=0x24d21458 chip=0x24db8086 rev=0x02 hdr=0x00 class = mass storage subclass = ATA atapci1_at_pci0:31:2: class=0x01018f card=0x24d11458 chip=0x24d18086 rev=0x02 hdr=0x00 class = mass storage subclass = ATA none1_at_pci0:31:3: class=0x0c0500 card=0x24d21458 chip=0x24d38086 rev=0x02 hdr=0x00 class = serial bus subclass = SMBus none2_at_pci0:31:5: class=0x040100 card=0xa0021458 chip=0x24d58086 rev=0x02 hdr=0x00 class = multimedia subclass = audio none3_at_pci1:0:0: class=0x030000 card=0x00021002 chip=0x4e451002 rev=0x00 hdr=0x00 class = display subclass = VGA none4_at_pci1:0:1: class=0x038000 card=0x00031002 chip=0x4e651002 rev=0x00 hdr=0x00 class = display em0_at_pci2:1:0: class=0x020000 card=0x10198086 chip=0x10198086 rev=0x00 hdr=0x00 class = network subclass = ethernet ahc0_at_pci3:1:0: class=0x010000 card=0x78819004 chip=0x81789004 rev=0x01 hdr=0x00 class = mass storage subclass = SCSI pcib4_at_pci3:2:0: class=0x060400 card=0x00000000 chip=0x00011011 rev=0x02 hdr=0x01 class = bridge subclass = PCI-PCI fwohci0_at_pci3:10:0: class=0x0c0010 card=0x00000000 chip=0x8024104c rev=0x00 hdr=0x00 class = serial bus subclass = FireWire ahc1_at_pci4:4:0: class=0x010000 card=0x00000000 chip=0x72789004 rev=0x03 hdr=0x00 class = mass storage subclass = SCSI ahc2_at_pci4:5:0: class=0x010000 card=0x00000000 chip=0x72789004 rev=0x03 hdr=0x00 class = mass storage subclass = SCSI -------------------------------------------------------------- pnpinfo output: Checking for Plug-n-Play devices... No Plug-n-Play devices were found -------------------------------------------------------------- some release 4.10 dmesg output: orm0: <Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd07ff,0xd1000-0xd37ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 -------------------------------------------------------------- Dan Strick strick_at_covad.netReceived on Thu Sep 23 2004 - 17:45:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:13 UTC