Hi all, After upgrading my 5.3-BETA4 to 5.3-BETA5, I am unable to boot the new kernel in either single-user or multi-user mode. After mounting the root fs, init bombs out with the following error: init: can't get /dev/console for controlling terminal: Device not configured And the boot stops, but the system doesn't hang. CTRL-ALT-DEL does a clean reboot. Any suggestion? Below is my system config. Regards, Sven Hazejager *** /etc/make.conf *** # -- use.perl generated deltas -- # # Created: Sat Jan 31 22:25:37 2004 # Setting to use base perl from ports: PERL_VER=5.6.1 PERL_VERSION=5.6.1 PERL_ARCH=mach NOPERL=yo NO_PERL=yo NO_PERL_WRAPPER=yo CPUTYPE=athlon #CFLAGS=-O2 -pipe COMPAT3X=yes COMPAT4X=yes NO_MODULES=true MODULES_WITH_WORLD=true *** /boot/loader.conf *** vesa_load="YES" sound_load="YES" snd_via8233_load="YES" io_load="YES" mem_load="YES" nfsclient_load="YES" nfsserver_load="YES" sysvmsg_load="YES" sysvsem_load="YES" sysvshm_load="YES" agp_load="YES" apm_load="YES" apm_saver_load="YES" miibus_load="YES" if_xl_load="YES" random_load="YES" fdc_load="YES" *** dmesg output *** Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA4 #0: Sun Sep 12 16:30:55 CEST 2004 sven_at_spitfire.chain.loc:/usr/obj/usr/src/sys/SPITFIRE Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP (1867.51-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 536805376 (511 MB) avail memory = 515629056 (491 MB) acpi0: <VIA694 AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource pci0: <ACPI PCI bus> on pcib0 agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xd7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xe3000000-0xe300007f irq 15 at device 10.0 on pci0 miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:01:02:ab:b5:88 ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd400-0xd4ff mem 0xe3001000-0xe3001fff irq 15 at device 12.0 on pci0 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xe3002000-0xe3002fff irq 11 at device 12.1 on pci0 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci0: <serial bus, USB> at device 16.0 (no driver attached) pci0: <serial bus, USB> at device 16.1 (no driver attached) pci0: <serial bus, USB> at device 16.2 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <VIA VT8235> port 0xe800-0xe8ff irq 15 at device 17.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC650 AC97 Codec> fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <ISA Option ROMs> at iomem 0xd0000-0xd07ff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1867514752 Hz quality 800 Timecounters tick every 4.000 msec WARNING: apm_saver module requires apm enabled Waiting 5 seconds for SCSI devices to settle da1 at ahc1 bus 0 target 0 lun 0 da1: <QUANTUM ATLAS10K3_36_WLS 020W> Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da1: 35074MB (71833096 512 byte sectors: 255H 63S/T 4471C) cd1 at ahc0 bus 0 target 6 lun 0 cd1: <PLEXTOR CD-R PX-R412C 1.07> Removable CD-ROM SCSI-2 device cd1: 10.000MB/s transfers (10.000MHz, offset 8) cd1: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 2 lun 0 da0: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device da0: 3.300MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA DVD-ROM SD-M1401 1008> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: cd present [358668 x 2048 byte records] (da0:ahc0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ahc0:0:2:0): CAM Status: SCSI Status Error (da0:ahc0:0:2:0): SCSI Status: Check Condition (da0:ahc0:0:2:0): NOT READY asc:3a,0 (da0:ahc0:0:2:0): Medium not present (da0:ahc0:0:2:0): Unretryable error Opened disk da0 -> 6 (da0:ahc0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ahc0:0:2:0): CAM Status: SCSI Status Error (da0:ahc0:0:2:0): SCSI Status: Check Condition (da0:ahc0:0:2:0): NOT READY asc:3a,0 (da0:ahc0:0:2:0): Medium not present (da0:ahc0:0:2:0): Unretryable error Opened disk da0 -> 6 (da0:ahc0:0:2:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:ahc0:0:2:0): CAM Status: SCSI Status Error (da0:ahc0:0:2:0): SCSI Status: Check Condition (da0:ahc0:0:2:0): NOT READY asc:3a,0 (da0:ahc0:0:2:0): Medium not present (da0:ahc0:0:2:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/da1s2a *** This is where 5.3-BETA5 fails with the init error *** uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xe400-0xe41f at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered *** kernel config *** machine i386 cpu I686_CPU ident SPITFIRE options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories #options MD_ROOT #MD is a potential root device #options NFS_ROOT #NFS usable as /, requires NFSCLIENT #options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options ADAPTIVE_GIANT # Giant mutex is adaptive. options HZ=250 device isa device pci # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD #device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Floating point support - do not disable. device npx # Add suspend/resume support for the i8254. device pmtimer # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # Pseudo devices - the number indicates how many units to allocate. device loop # Network loopback device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter options SC_PIXEL_MODEReceived on Sun Sep 26 2004 - 14:43:59 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:14 UTC