I don't have debugging enabled in the kernel and this is a remote machine so all I really know is that it spontaneously reboots under the same circumstances on a semi regular basis. But just in case this helps anyone here is what I do have. This system has run fine for months on freebsd 5.2.1-RELEASE without any issues under the same workload. Problem: Reboots (panic I assume) when rdisting to a freebsd 4.7 box over a local 100mb link. Dmesg after crash: Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA6 #0: Sun Sep 26 14:37:21 PDT 2004 root_at_catalog1.paymentonline.net:/usr/obj/usr/src/sys/CATALOG1 ACPI APIC Table: <DELL PE2650 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.50-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE > Hyperthreading: 2 logical CPUs real memory = 1073610752 (1023 MB) avail memory = 1041031168 (992 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 Security policy loaded: TrustedBSD MAC/seeotheruids (mac_seeotheruids) Security policy loaded: TrustedBSD MAC/Biba (mac_biba) Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended) Security policy loaded: TrustedBSD MAC/Partition (mac_partition) ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE2650> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <unknown> at device 4.0 (no driver attached) pci0: <unknown> at device 4.1 (no driver attached) pci0: <unknown> at device 4.2 (no driver attached) pci0: <display, VGA> at device 14.0 (no driver attached) atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: <PCI-ISA bridge> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 8.0 on pci4 pci5: <ACPI PCI bus> on pcib2 ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xcc00-0xccff mem 0xfccff000-0xfccfffff irq 30 at device 6.0 on pci5 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xc800-0xc8ff mem 0xfccfe000-0xfccfefff irq 31 at device 6.1 on pci5 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pcib3: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib3 bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfcf10000-0xfcf1ffff irq 28 at device 6.0 on pci3 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0f:1f:6e:f2:84 bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfcf00000-0xfcf0ffff irq 29 at device 8.0 on pci3 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:0f:1f:6e:f2:85 pcib4: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib4 pcib5: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib5 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xcdfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 10 packets/entry by default ATAPI_RESET time = 20us acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33 Waiting 15 seconds for SCSI devices to settle ses0 at ahc0 bus 0 target 6 lun 0 ses0: <PE/PV 1x5 SCSI BP 1.1> Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at ahc0 bus 0 target 0 lun 0 da0: <FUJITSU MAP3367NC 5608> Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/da0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 188 files 16 /usr: superblock summary recomputed WARNING: /var was not properly dismounted Accounting enabled Kernel Config (only parts that differ from GENERIC): machine i386 cpu I686_CPU ident CATALOG1 # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories options MD_ROOT # MD is a potential root device options NFSCLIENT # Network Filesystem Client options NFSSERVER # Network Filesystem Server options NFS_ROOT # NFS usable as /, requires NFSCLIENT options MSDOSFS # MSDOS Filesystem options CD9660 # ISO 9660 Filesystem options PROCFS # Process filesystem (requires PSEUDOFS) options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support options SYSVSHM # SYSV-style shared memory options SYSVMSG # SYSV-style message queues options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options MAC options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT ## Up limits for postgres options SHMMAXPGS=131072 options SEMMNI=128 options SEMMNS=512 options SEMUME=100 options SEMMNU=256Received on Tue Sep 28 2004 - 20:06:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:14 UTC