Re: ATA disk performance (ICH2 controller)

From: Ruslan Ershov <null_at_grayling.ru>
Date: Thu, 30 Sep 2004 10:03:42 +0900
Hi!

FreeBSD 5.3-BETA6 from 2004-09-29 05:17:26 GMT (SCHED_4BSD, no option PREEMPTION, no option SMP & device apic)
MB: EPOX-3PTA (i815EPB) ICH2

Cable 80-pin. Blue connector at controller, black/grey at devices.
ad0 (7200 rpm, 2 MB) Jumper -> Cable Select (Device 0). Write cache enabled.
ad1 (7200 rpm, 8 MB) Jumper -> Cable Select (Device 1). Write cache enabled.

# atacontrol list
ATA channel 0:
    Master:  ad0 <Maxtor 6E030L0/NAR61590> ATA/ATAPI revision 7
    Slave:   ad1 <WDC WD800JB-00JJA0/05.01C05> ATA/ATAPI revision 6
ATA channel 1:
    Master: atap <SONY CD-RW CRX300E/KYS2> ATA/ATAPI revision 5
    Slave:  atap <HL-DT-ST CD-ROM GCR-8520B/1.00> ATA/ATAPI revision 0

# atacontrol mode 0 UDMA100 UDMA100
Master = UDMA100
Slave  = UDMA100

# atacontrol mode 1 UDMA33 UDMA33
Master = UDMA33
Slave  = WDMA2

# atacontrol mode 0
Master = UDMA100
Slave  = UDMA100

# atacontrol mode 1
Master = UDMA33
Slave  = WDMA2

Write test at ad0:
# dd if=/dev/zero of=test bs=1024k count=1024
1024+0 records in
1024+0 records out
1073741824 bytes transferred in 26.921087 secs (39884787 bytes/sec)

Write test at ad1:
# dd if=/dev/zero of=test bs=1024k count=1024
1024+0 records in
1024+0 records out
1073741824 bytes transferred in 66.367760 secs (16178666 bytes/sec)



66.37 secs / 26.92 secs = 2.47

Why so?



syslogd: kernel boot file is /boot/kernel/kernel
kernel: ull device, zero device>
kernel: random: <entropy source, Software, Yarrow>
kernel: netsmb_dev: loaded
kernel: io: <I/O>
kernel: mem: <memory>
kernel: Pentium Pro MTRR support enabled
kernel: acpi0: <IntelR AWRDACPI> on motherboard
kernel: acpi0: [MPSAFE]
kernel: pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
kernel: pci_open(1a):	mode1res=0x80000000 (0x80000000)
kernel: pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
kernel: pcibios: BIOS version 2.10
kernel: Found $PIR table, 10 entries at 0xc00fded0
kernel: PCI-Only Interrupts: 5 9 11
kernel: Location  Bus Device Pin  Link  IRQs
kernel: slot 1      0    2    A   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 1      0    2    B   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 1      0    2    C   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 1      0    2    D   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 2      2    8    A   0x68  3 4 5 7 9 10 11 12 14 15
kernel: slot 2      2    8    B   0x69  3 4 5 7 9 10 11 12 14 15
kernel: slot 2      2    8    C   0x6a  3 4 5 7 9 10 11 12 14 15
kernel: slot 2      2    8    D   0x6b  3 4 5 7 9 10 11 12 14 15
kernel: slot 3      2    1    A   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 3      2    1    B   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 3      2    1    C   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 3      2    1    D   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 4      2    0    A   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 4      2    0    B   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 4      2    0    C   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 4      2    0    D   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 5      2    3    A   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 5      2    3    B   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 5      2    3    C   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 5      2    3    D   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 6      2    2    A   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 6      2    2    B   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 6      2    2    C   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 6      2    2    D   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 7      2    4    A   0x60  3 4 5 7 9 10 11 12 14 15
kernel: slot 7      2    4    B   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 7      2    4    C   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 7      2    4    D   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 8      2    5    A   0x61  3 4 5 7 9 10 11 12 14 15
kernel: slot 8      2    5    B   0x62  3 4 5 7 9 10 11 12 14 15
kernel: slot 8      2    5    C   0x63  3 4 5 7 9 10 11 12 14 15
kernel: slot 8      2    5    D   0x60  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0   31    A   0x60  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0   31    B   0x61  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0   31    C   0x6b  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0   31    D   0x63  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0    1    A   0x60  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0    1    B   0x61  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0    1    C   0x62  3 4 5 7 9 10 11 12 14 15
kernel: embedded    0    1    D   0x63  3 4 5 7 9 10 11 12 14 15
kernel: AcpiOsDerivePciId: bus 0 dev 31 func 0
kernel: AcpiOsDerivePciId: bus 0 dev 31 func 0
kernel: acpi0: Power Button (fixed)
kernel: ACPI timer looks GOOD min = 2, max = 3, width = 1
last message repeated 9 times
kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
kernel: cpu0: <ACPI CPU (3 Cx states)> on acpi0
kernel: acpi_tz0: <Thermal Zone> on acpi0
kernel: acpi_button0: <Power Button> on acpi0
kernel: pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0
kernel: ACPI link \_SB_.PCI0.LNKD has invalid initial irq 9, ignoring
kernel: ACPI PCI link initial configuration:
kernel: \_SB_.PCI0.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.30.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.30.1
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.30.2
kernel: \_SB_.PCI0.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.30.3
kernel: \_SB_.PCI0.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.2.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.2.1
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.2.2
kernel: \_SB_.PCI0.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.2.3
kernel: \_SB_.PCI0.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.31.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.31.1
kernel: \_SB_.PCI0.LNK1 irq  0: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 0.31.2
kernel: \_SB_.PCI0.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.31.3
kernel: \_SB_.PCI0.LNKA irq  0: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 0.1.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.1.1
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.1.2
kernel: \_SB_.PCI0.LNKD irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 0.1.3
kernel: pci0: <ACPI PCI bus> on pcib0
kernel: pci0: physical bus=0
kernel: map[10]: type 3, range 32, base e0000000, size 26, enabled
kernel: found->	vendor=0x8086, dev=0x1130, revid=0x04
kernel: bus=0, slot=0, func=0
kernel: class=06-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x8086, dev=0x1131, revid=0x04
kernel: bus=0, slot=1, func=0
kernel: class=06-04-00, hdrtype=0x01, mfdev=0
kernel: cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x8086, dev=0x244e, revid=0x05
kernel: bus=0, slot=30, func=0
kernel: class=06-04-00, hdrtype=0x01, mfdev=0
kernel: cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
kernel: found->	vendor=0x8086, dev=0x2440, revid=0x05
kernel: bus=0, slot=31, func=0
kernel: class=06-01-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: map[20]: type 4, range 32, base 0000f000, size  4, enabled
kernel: found->	vendor=0x8086, dev=0x244b, revid=0x05
kernel: bus=0, slot=31, func=1
kernel: class=01-01-80, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: map[20]: type 4, range 32, base 0000d000, size  5, enabled
kernel: pcib0: matched entry for 0.31.INTD (src \_SB_.PCI0.LNKD)
kernel: pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
kernel: ACPI PCI link arbitrated settings:
kernel: \_SB_.PCI0.LNKA (references 4, priority 50660):
kernel: interrupts:	    11    10     5    12     7     6     4     3    15    14
kernel: penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
kernel: \_SB_.PCI0.LNKB (references 4, priority 50660):
kernel: interrupts:	    11    10     5    12     7     6     4     3    15    14
kernel: penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
kernel: \_SB_.PCI0.LNKD (references 4, priority 50660):
kernel: interrupts:	    11    10     5    12     7     6     4     3    15    14
kernel: penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
kernel: \_SB_.PCI0.LNKC (references 3, priority 37995):
kernel: interrupts:	    11    10     5    12     7     6     4     3    15    14
kernel: penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
kernel: \_SB_.PCI0.LNK1 (references 1, priority 12665):
kernel: interrupts:	    11    10     5    12     7     6     4     3    15    14
kernel: penalty:	   160   160   210  5160  5160  5160  5160  5160 50160 50160
kernel: pcib0: slot 31 INTD routed to irq 11 via \_SB_.PCI0.LNKD
kernel: found->	vendor=0x8086, dev=0x2442, revid=0x05
kernel: bus=0, slot=31, func=2
kernel: class=0c-03-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=d, irq=11
kernel: map[20]: type 4, range 32, base 00005000, size  4, enabled
kernel: found->	vendor=0x8086, dev=0x2443, revid=0x05
kernel: bus=0, slot=31, func=3
kernel: class=0c-05-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=b, irq=255
kernel: map[20]: type 4, range 32, base 0000d400, size  5, enabled
kernel: pcib0: matched entry for 0.31.INTC (src \_SB_.PCI0.LNK1)
kernel: pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
kernel: ACPI PCI link arbitrated settings:
kernel: \_SB_.PCI0.LNKA (references 4, priority 51316):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   320   360   370  5320  5320  5320  5320  5320 50320 50320
kernel: \_SB_.PCI0.LNKB (references 4, priority 51316):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   320   360   370  5320  5320  5320  5320  5320 50320 50320
kernel: \_SB_.PCI0.LNKC (references 3, priority 38487):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   320   360   370  5320  5320  5320  5320  5320 50320 50320
kernel: \_SB_.PCI0.LNK1 (references 1, priority 12829):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   320   360   370  5320  5320  5320  5320  5320 50320 50320
kernel: pcib0: slot 31 INTC routed to irq 5 via \_SB_.PCI0.LNK1
kernel: found->	vendor=0x8086, dev=0x2444, revid=0x05
kernel: bus=0, slot=31, func=4
kernel: class=0c-03-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
kernel: lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: intpin=c, irq=5
kernel: agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
kernel: agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
kernel: agp0: allocating GATT for aperture of size 36M
kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0
kernel: pcib1:   secondary bus     1
kernel: pcib1:   subordinate bus   1
kernel: pcib1:   I/O decode        0xf000-0xfff
kernel: pcib1:   memory decode     0xe4000000-0xe5ffffff
kernel: pcib1:   prefetched decode 0xd0000000-0xdfffffff
kernel: pci1: <PCI bus> on pcib1
kernel: pci1: physical bus=1
kernel: map[10]: type 1, range 32, base e4000000, size 24, enabled
kernel: pcib1: device (null) requested decoded memory range 0xe4000000-0xe4ffffff
kernel: map[14]: type 3, range 32, base d0000000, size 27, enabled
kernel: pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff
kernel: map[18]: type 3, range 32, base d8000000, size 19, enabled
kernel: pcib1: device (null) requested decoded memory range 0xd8000000-0xd807ffff
kernel: pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA)
kernel: pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
kernel: ACPI PCI link arbitrated settings:
kernel: \_SB_.PCI0.LNKA (references 4, priority 51960):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   480   520   540  5480  5480  5480  5480  5480 50480 50480
kernel: \_SB_.PCI0.LNKB (references 4, priority 51960):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   480   520   540  5480  5480  5480  5480  5480 50480 50480
kernel: \_SB_.PCI0.LNKC (references 3, priority 38970):
kernel: interrupts:	    10    11     5    12     7     6     4     3    15    14
kernel: penalty:	   480   520   540  5480  5480  5480  5480  5480 50480 50480
kernel: pcib0: slot 1 INTA routed to irq 11 via \_SB_.PCI0.LNKA
kernel: pcib1: slot 0 INTA is routed to irq 11
kernel: found->	vendor=0x10de, dev=0x0171, revid=0xa3
kernel: bus=1, slot=0, func=0
kernel: class=03-00-00, hdrtype=0x00, mfdev=0
kernel: cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
kernel: intpin=a, irq=11
kernel: powerspec 2  supports D0 D3  current D0
kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
kernel: pcib2:   secondary bus     2
kernel: pcib2:   subordinate bus   2
kernel: pcib2:   I/O decode        0xc000-0xcfff
kernel: pcib2:   memory decode     0xfff00000-0xfffff
kernel: pcib2:   prefetched decode 0xe6000000-0xe60fffff
kernel: pcib2:   Subtractively decoded bridge.
kernel: ACPI PCI link initial configuration:
kernel: \_SB_.PCI0.LNKE irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.8.0
kernel: \_SB_.PCI0.LNKF irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.8.1
kernel: \_SB_.PCI0.LNK0 irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.8.2
kernel: \_SB_.PCI0.LNK1 irq* 5: [ 3  4  5  6  7 10 11 12 14 15]  5+ low,level,sharable 2.8.3
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.1.0
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.1.1
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.1.2
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.1.3
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.0.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.0.1
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.0.2
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.0.3
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.3.0
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.3.1
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.3.2
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.3.3
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.2.0
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.2.1
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.2.2
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.2.3
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.4.0
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.4.1
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.4.2
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.4.3
kernel: \_SB_.PCI0.LNKB irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.5.0
kernel: \_SB_.PCI0.LNKC irq  0: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.5.1
kernel: \_SB_.PCI0.LNKD irq*11: [ 3  4  5  6  7 10 11 12 14 15]  0+ low,level,sharable 2.5.2
kernel: \_SB_.PCI0.LNKA irq*11: [ 3  4  5  6  7 10 11 12 14 15] 11+ low,level,sharable 2.5.3
kernel: pci2: <ACPI PCI bus> on pcib2
kernel: pci2: physical bus=2
kernel: map[10]: type 3, range 32, base e6000000, size 12, enabled
kernel: pcib2: device (null) requested decoded memory range 0xe6000000-0xe6000fff
kernel: pcib2: matched entry for 2.0.INTA (src \_SB_.PCI0.LNKA)
kernel: pcib2: slot 0 INTA is already routed to irq 11
kernel: found->	vendor=0x109e, dev=0x036e, revid=0x11
kernel: bus=2, slot=0, func=0
kernel: class=04-00-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x28 (10000 ns)
kernel: intpin=a, irq=11
kernel: powerspec 2  supports D0 D3  current D0
kernel: map[10]: type 3, range 32, base e6001000, size 12, enabled
kernel: pcib2: device (null) requested decoded memory range 0xe6001000-0xe6001fff
kernel: pcib2: matched entry for 2.0.INTA (src \_SB_.PCI0.LNKA)
kernel: pcib2: slot 0 INTA is already routed to irq 11
kernel: found->	vendor=0x109e, dev=0x0878, revid=0x11
kernel: bus=2, slot=0, func=1
kernel: class=04-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
kernel: intpin=a, irq=11
kernel: powerspec 2  supports D0 D3  current D0
kernel: map[10]: type 4, range 32, base 0000c000, size  5, enabled
kernel: pcib2: device (null) requested decoded I/O range 0xc000-0xc01f
kernel: pcib2: matched entry for 2.4.INTA (src \_SB_.PCI0.LNKA)
kernel: pcib2: slot 4 INTA is already routed to irq 11
kernel: found->	vendor=0x1102, dev=0x0002, revid=0x07
kernel: bus=2, slot=4, func=0
kernel: class=04-01-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
kernel: intpin=a, irq=11
kernel: powerspec 1  supports D0 D1 D2 D3  current D0
kernel: map[10]: type 4, range 32, base 0000c400, size  3, enabled
kernel: pcib2: device (null) requested decoded I/O range 0xc400-0xc407
kernel: found->	vendor=0x1102, dev=0x7002, revid=0x07
kernel: bus=2, slot=4, func=1
kernel: class=09-80-00, hdrtype=0x00, mfdev=1
kernel: cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
kernel: lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
kernel: powerspec 1  supports D0 D1 D2 D3  current D0
kernel: bktr0: <BrookTree 878> mem 0xe6000000-0xe6000fff irq 11 at device 0.0 on pci2
kernel: bktr0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe6000000
kernel: bktr0: [GIANT-LOCKED]
kernel: brooktree0: PCI bus latency is 32.
kernel: bktr0: buffer size 3555328, addr 0x1b000000
kernel: bktr0: GPIO is 0x00ac7ff3
kernel: bktr0: subsystem 0x1461 0x0003
kernel: bktr0: AVer Media TV/FM, Philips FR1216 PAL FM tuner.
kernel: pci2: <multimedia> at device 0.1 (no driver attached)
kernel: pcm0: <Creative EMU10K1> port 0xc000-0xc01f irq 11 at device 4.0 on pci2
kernel: pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0xc000
kernel: emu: setmap (1f3e2000, 800), nseg=1, error=0
kernel: emu: setmap (1f3e1000, 1000), nseg=1, error=0
kernel: pcm0: <SigmaTel STAC9708/11 AC97 Codec (id = 0x83847608)>
kernel: pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
kernel: pcm0: Primary codec extended features surround DAC
kernel: pcm0: [MPSAFE]
kernel: emu: setmap (1f3ff000, 1000), nseg=1, error=0
kernel: emu: setmap (1f31d000, 1000), nseg=1, error=0
kernel: emu: setmap (1f23b000, 1000), nseg=1, error=0
kernel: emu: setmap (1f159000, 1000), nseg=1, error=0
kernel: pcm0: sndbuf_setmap 1f44f000, 1000; 0xc1abb000 -> 1f44f000
kernel: pcm0: sndbuf_setmap 1f42c000, 1000; 0xc1ab8000 -> 1f42c000
kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
kernel: isa0: <ISA bus> on isab0
kernel: atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
kernel: atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
kernel: ata0: channel #0 on atapci0
kernel: atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
kernel: atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=50
kernel: ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
kernel: ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
kernel: ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
kernel: ata0: [MPSAFE]
kernel: ata1: channel #1 on atapci0
kernel: atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
kernel: atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
kernel: ata1: reset tp1 mask=03 ostat0=50 ostat1=50
kernel: ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
kernel: ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
kernel: ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
kernel: ata1: [MPSAFE]
kernel: uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 11 at device 31.2 on pci0
kernel: uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
kernel: uhci0: [GIANT-LOCKED]
kernel: usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
kernel: usb0: USB revision 1.0
kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
kernel: uhub0: 2 ports with 2 removable, self powered
kernel: ums0: A4Tech USB Optical Mouse, rev 1.10/0.01, addr 2, iclass 3/1
kernel: ums0: 7 buttons and Z dir.
kernel: uhub1: USB 2.0 Flash Disk USB Embedded Hub, class 9/0, rev 2.00/0.01, addr 3
kernel: uhub1: 1 port with 0 removable, self powered
kernel: umass0: USB 2.0 Flash Disk USB Mass Storage Device, rev 2.00/0.01, addr 4
kernel: umass0:0:0:-1: Attached to scbus0
kernel: ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0x5000-0x500f at device 31.3 on pci0
kernel: ichsmb0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x5000
kernel: pcib0: matched entry for 0.31.INTB (src \_SB_.PCI0.LNKB)
kernel: pcib0: possible interrupts:  3  4  5  6  7 10 11 12 14 15
kernel: ACPI PCI link arbitrated settings:
kernel: \_SB_.PCI0.LNKB (references 10, priority 132020):
kernel: interrupts:	    10     5    11    12     7     6     4     3    15    14
kernel: penalty:	   640   700   880  5640  5640  5640  5640  5640 50800 50800
kernel: \_SB_.PCI0.LNKC (references 9, priority 118818):
kernel: interrupts:	    10     5    11    12     7     6     4     3    15    14
kernel: penalty:	   640   700   880  5640  5640  5640  5640  5640 50800 50800
kernel: \_SB_.PCI0.LNKE (references 1, priority 13202):
kernel: interrupts:	     0     0     0     0     0     0     0     0     0     0
kernel: penalty:	100000100000100000100000100000100000100000100000100000100000
kernel: \_SB_.PCI0.LNKF (references 1, priority 13202):
kernel: interrupts:	     0     0     0     0     0     0     0     0     0     0
kernel: penalty:	100000100000100000100000100000100000100000100000100000100000
kernel: \_SB_.PCI0.LNK0 (references 1, priority 13202):
kernel: interrupts:	     0     0     0     0     0     0     0     0     0     0
kernel: penalty:	100000100000100000100000100000100000100000100000100000100000
kernel: atpic: Programming IRQ10 as level/low
kernel: pcib0: slot 31 INTB routed to irq 10 via \_SB_.PCI0.LNKB
kernel: ichsmb0: [GIANT-LOCKED]
kernel: smbus0: <System Management Bus> on ichsmb0
kernel: smb0: <SMBus generic I/O> on smbus0
kernel: uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd400-0xd41f irq 5 at device 31.4 on pci0
kernel: uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
kernel: uhci1: [GIANT-LOCKED]
kernel: usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
kernel: usb1: USB revision 1.0
kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
kernel: uhub2: 2 ports with 2 removable, self powered
kernel: fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
kernel: fdc0: ic_type 90 part_id 80
kernel: fdc0: [MPSAFE]
kernel: fdc0: [FAST]
kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
kernel: sio0: irq maps: 0x801 0x811 0x801 0x801
kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
kernel: sio0: type 16550A
kernel: sio1: irq maps: 0x801 0x809 0x801 0x801
kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0
kernel: sio1: type 16550A
kernel: unknown: not probed (disabled)
kernel: unknown: not probed (disabled)
kernel: ppc0: using extended I/O port range
kernel: ppc0: ECP SPP ECP+EPP SPP
kernel: ppc0 port 0xf78-0xf7b,0xb78-0xb7b,0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
kernel: ppc0: FIFO with 16/16/16 bytes threshold
kernel: ppbus0: <Parallel port bus> on ppc0
kernel: plip0: <PLIP network interface> on ppbus0
kernel: plip0: bpf attached
kernel: lpt0: <Printer> on ppbus0
kernel: lpt0: Interrupt-driven port
kernel: ppi0: <Parallel I/O> on ppbus0
kernel: unknown: not probed (disabled)
kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
kernel: atkbd: the current kbd controller command byte 0047
kernel: atkbd: keyboard ID 0x41ab (2)
kernel: kbd0 at atkbd0
kernel: kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
kernel: atkbd0: [GIANT-LOCKED]
kernel: psm0: unable to allocate IRQ
kernel: unknown: not probed (disabled)
last message repeated 2 times
kernel: npx0: [FAST]
kernel: npx0: <math processor> on motherboard
kernel: npx0: INT 16 interface
kernel: unknown: Failed Intstat Reg Test
kernel: unknown: status reg test failed ff
last message repeated 4 times
kernel: ata: ata0 already exists; skipping it
kernel: ata: ata1 already exists; skipping it
kernel: atkbdc: atkbdc0 already exists; skipping it
kernel: fdc: fdc0 already exists; skipping it
kernel: ppc: ppc0 already exists; skipping it
kernel: sio: sio0 already exists; skipping it
kernel: sio: sio1 already exists; skipping it
kernel: Trying Read_Port at 203
kernel: Trying Read_Port at 243
kernel: Trying Read_Port at 283
kernel: Trying Read_Port at 2c3
kernel: Trying Read_Port at 303
kernel: Trying Read_Port at 343
kernel: Trying Read_Port at 383
kernel: Trying Read_Port at 3c3
kernel: sc: sc0 already exists; skipping it
kernel: vga: vga0 already exists; skipping it
kernel: isa_probe_children: disabling PnP devices
kernel: isa_probe_children: probing non-PnP devices
kernel: orm0: <ISA Option ROM> at iomem 0xd0000-0xd3fff on isa0
kernel: pmtimer0 on isa0
kernel: adv0: not probed (disabled)
kernel: aha0: not probed (disabled)
kernel: aic0: not probed (disabled)
kernel: bt0: not probed (disabled)
kernel: cs0: not probed (disabled)
kernel: ed0: not probed (disabled)
kernel: fe0: not probed (disabled)
kernel: ie0: not probed (disabled)
kernel: lnc0: not probed (disabled)
kernel: pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
kernel: pcic1: not probed (disabled)
kernel: sc0: <System console> at flags 0x100 on isa0
kernel: sc0: VGA <16 virtual consoles, flags=0x300>
kernel: sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
kernel: sio2: not probed (disabled)
kernel: sio3: not probed (disabled)
kernel: sn0: not probed (disabled)
kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
kernel: fb0: vga0, vga, type:VGA (5), flags:0x7007f
kernel: fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
kernel: fb0: init mode:24, bios mode:3, current mode:24
kernel: fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
kernel: vga0: vga: WARNING: video mode switching is not fully supported on this adapter
kernel: VGA parameters upon power-up
kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
kernel: bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
kernel: VGA parameters in BIOS for mode 24
kernel: 8a da 66 5a c3 56 66 50 e8 d5 ff 66 2e 8b 5c 04 
kernel: 66 58 5e c3 66 52 66 2e 8b 14 66 81 e2 00 ff 00 
kernel: 00 66 c1 ea 08 8a da 66 5a c3 66 52 66 2e 8b 14 
kernel: 66 81 e2 f0 00 00 00 66 c1 ea 04 8a ca 66 5a c3 
kernel: EGA/VGA parameters to be used for mode 24
kernel: 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
kernel: bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
kernel: b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
kernel: 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
kernel: vt0: not probed (disabled)
kernel: isa_probe_children: probing PnP devices
kernel: Device configuration finished.
kernel: procfs registered
kernel: Timecounter "TSC" frequency 1412752022 Hz quality 800
kernel: Timecounters tick every 0.862 msec
kernel: IPsec: Initialized Security Association Processing.
kernel: ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
kernel: lo0: bpf attached
kernel: cpu0: set speed to 100.0%
kernel: acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
kernel: ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
kernel: ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
kernel: ata0-master: setting PIO4 on Intel ICH2 chip
kernel: ata0-master: setting UDMA100 on Intel ICH2 chip
kernel: ata0-slave: setting PIO4 on Intel ICH2 chip
kernel: ata0-slave: setting UDMA100 on Intel ICH2 chip
kernel: ad0: <Maxtor 6E030L0/NAR61590> ATA-7 disk at ata0-master
kernel: ad0: 29325MB (60058656 sectors), 59582 C, 16 H, 63 S, 512 B
kernel: ad0: 16 secs/int, 1 depth queue, UDMA100
kernel: ad1: <WDC WD800JB-00JJA0/05.01C05> ATA-6 disk at ata0-slave
kernel: ad1: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
kernel: ad1: 16 secs/int, 1 depth queue, UDMA100
kernel: ata1-slave: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
kernel: ATAPI_RESET time = 90us
kernel: ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
kernel: ATAPI_RESET time = 10us
kernel: ata1-master: setting PIO4 on Intel ICH2 chip
kernel: ata1-master: setting UDMA33 on Intel ICH2 chip
kernel: ata1-slave: setting PIO4 on Intel ICH2 chip
kernel: GEOM: new disk ad0
kernel: GEOM: new disk ad1
kernel: [0] f:00 typ:11 s(CHS):0/1/1 e(CHS):1023/4/63 s:63 l:8401932
kernel: [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/9/63 s:8401995 l:20482875
kernel: [2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:28884870 l:31173786
kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: GEOM: Configure ad0s1, start 32256 length 4301789184 end 4301821439
kernel: GEOM: Configure ad0s2, start 4301821440 length 10487232000 end 14789053439
kernel: GEOM: Configure ad0s3, start 14789053440 length 15960978432 end 30750031871
kernel: [0] f:00 typ:15 s(CHS):15/15/1 e(CHS):1023/10/63 s:16065 l:62524980
kernel: [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/14/63 s:62541045 l:93755340
kernel: [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: GEOM: Configure ad1s1, start 8225280 length 32012789760 end 32021015039
kernel: GEOM: Configure ad1s2, start 32021015040 length 48002734080 end 80023749119
kernel: MBREXT Slice 5 on ad0s2:
kernel: [0] f:00 typ:11 s(CHS):523/1/1 e(CHS):773/254/63 s:63 l:20482812
kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: GEOM: Configure ad0s5, start 32256 length 10487199744 end 10487231999
kernel: GEOM: Configure ad0s3a, start 0 length 134217728 end 134217727
kernel: GEOM: Configure ad0s3b, start 134217728 length 1073741824 end 1207959551
kernel: GEOM: Configure ad0s3c, start 0 length 15960978432 end 15960978431
kernel: GEOM: Configure ad0s3d, start 1207959552 length 14155776000 end 15363735551
kernel: GEOM: Configure ad0s3e, start 15363735552 length 597242880 end 15960978431
kernel: MBREXT Slice 5 on ad1s1:
kernel: [0] f:00 typ:11 s(CHS):1/1/1 e(CHS):820/254/63 s:63 l:62524917
kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: GEOM: Configure ad1s5, start 32256 length 32012757504 end 32012789759
kernel: GEOM: Configure ad1s2c, start 0 length 48002734080 end 48002734079
kernel: GEOM: Configure ad1s2d, start 0 length 48002734080 end 48002734079
kernel: (probe1:ata0:0:1:0): error 22
kernel: (probe1:ata0:0:1:0): Unretryable Error
kernel: (probe1:ata0:0:1:0): error 22
kernel: (probe1:ata0:0:1:0): Unretryable Error
kernel: (probe0:ata0:0:0:0): error 22
kernel: (probe0:ata0:0:0:0): Unretryable Error
kernel: (probe0:ata0:0:0:0): error 22
kernel: (probe0:ata0:0:0:0): Unretryable Error
kernel: (probe2:ata1:0:0:0): error 22
kernel: (probe2:ata1:0:0:0): Unretryable Error
kernel: (probe2:ata1:0:0:0): error 6
kernel: (probe2:ata1:0:0:0): Unretryable Error
kernel: (probe2:ata1:0:0:0): error 22
kernel: (probe2:ata1:0:0:0): Unretryable Error
kernel: pass0 at umass-sim0 bus 0 target 0 lun 0
kernel: pass0: <USB 2.0 Flash Disk PROL> Removable Direct Access SCSI-0 device 
kernel: pass0: Serial Number 
kernel: pass0: 1.000MB/s transfers
kernel: pass1 at ata1 bus 0 target 0 lun 0
kernel: pass1: <SONY CD-RW  CRX300E KYS2> Removable CD-ROM SCSI-0 device 
kernel: pass1: 33.000MB/s transfers
kernel: pass2 at ata1 bus 0 target 1 lun 0
kernel: pass2: <HL-DT-ST CD-ROM GCR-8520B 1.00> Removable CD-ROM SCSI-0 device 
kernel: pass2: Serial Number 
kernel: pass2: 16.000MB/s transfers
kernel: GEOM: new disk cd0
kernel: GEOM: new disk cd1
kernel: GEOM: new disk da0
kernel: (cd0:ata1:0:0:0): error 6
kernel: (cd0:ata1:0:0:0): Unretryable Error
kernel: cd0 at ata1 bus 0 target 0 lun 0
kernel: cd0: <SONY CD-RW  CRX300E KYS2> Removable CD-ROM SCSI-0 device 
kernel: cd0: 33.000MB/s transfers
kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
kernel: da0 at umass-sim0 bus 0 target 0 lun 0
kernel: da0: <USB 2.0 Flash Disk PROL> Removable Direct Access SCSI-0 device 
kernel: da0: Serial Number 
kernel: da0: 1.000MB/s transfers
kernel: da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
kernel: cd1 at ata1 bus 0 target 1 lun 0
kernel: cd1: <HL-DT-ST CD-ROM GCR-8520B 1.00> Removable CD-ROM SCSI-0 device 
kernel: cd1: Serial Number 
kernel: cd1: 16.000MB/s transfers
kernel: cd1: cd present [329462 x 2048 byte records]
kernel: (cd0:ata1:0:0:0): error 6
kernel: (cd0:ata1:0:0:0): Unretryable Error
kernel: (cd0:ata1:0:0:0): error 6
kernel: (cd0:ata1:0:0:0): Unretryable Error
kernel: [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
kernel: Mounting root from ufs:/dev/ad0s3a
kernel: start_init: trying /sbin/init
kernel: Linux ELF exec handler installed
kernel: linprocfs registered
Received on Wed Sep 29 2004 - 23:03:49 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:14 UTC