Installed March 15th build of 6.0-CURRENT in DELL PE1750 successfully. After loggin in, I found this in 'dmesg'. Any ideas? ------------------------------------------------------------------------ --- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT-SNAP002 #0: Tue Mar 15 19:02:56 UTC 2005 root_at_x64.samsco.home:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2389.41-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536702976 (511 MB) avail memory = 515923968 (492 MB) ACPI APIC Table: <DELL PE1750 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 8 ioapic1: Changing APIC ID to 9 ioapic2: Changing APIC ID to 10 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE1750> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: <ACPI PCI Link LUSB> irq 11 on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 14.0 (no driver attached) atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x8b0-0x8bf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 11 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered isab0: <PCI-ISA bridge> at device 15.3 on pci0 isa0: <ISA bus> on isab0 pcib1: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib1 amr0: <LSILogic MegaRAID 1.51> mem 0xfc900000-0xfc93ffff,0xf0000000-0xf7ffffff irq 18 at device 3.0 on pci4 amr0: <LSILogic PERC 4/Di> Firmware 4.10, BIOS B111, 128MB RAM pcib2: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib2 fxp0: <Intel 82550 Pro/100 Ethernet> port 0xbcc0-0xbcff mem 0xfcb00000-0xfcb1ffff,0xfcb20000-0xfcb20fff irq 24 at device 6.0 on pci3 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:e7:8f:70 pcib3: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib3 bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfcd20000-0xfcd2ffff,0xfcd30000-0xfcd3ffff irq 16 at device 0.0 on pci2 miibus1: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus1 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0b:db:93:e3:f4 bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2002> mem 0xfcd00000-0xfcd0ffff,0xfcd10000-0xfcd1ffff irq 17 at device 0.1 on pci2 miibus2: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus2 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:0b:db:93:e3:f5 pcib4: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib4 ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xfcf01000-0xfcf01fff irq 20 at device 4.0 on pci1 ahc0: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfcf00000-0xfcf00fff irq 21 at device 4.1 on pci1 ahc1: [GIANT-LOCKED] aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci_link1: <ACPI PCI Link LNK0> irq 7 on acpi0 pci_link2: <ACPI PCI Link LNK1> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNK2> irq 5 on acpi0 pci_link4: <ACPI PCI Link LNK3> on acpi0 pci_link5: <ACPI PCI Link LNK4> irq 7 on acpi0 pci_link6: <ACPI PCI Link LNK5> irq 5 on acpi0 pci_link7: <ACPI PCI Link LNK6> on acpi0 pci_link8: <ACPI PCI Link LNK7> on acpi0 pci_link9: <ACPI PCI Link LNK8> irq 7 on acpi0 pci_link10: <ACPI PCI Link LNK9> on acpi0 pci_link11: <ACPI PCI Link LNKA> on acpi0 pci_link12: <ACPI PCI Link LNKB> on acpi0 pci_link13: <ACPI PCI Link LNKC> on acpi0 pci_link14: <ACPI PCI Link LNKD> on acpi0 pci_link15: <ACPI PCI Link LNKE> on acpi0 pci_link16: <ACPI PCI Link LNKF> on acpi0 pci_link17: <ACPI PCI Link LN10> on acpi0 pci_link18: <ACPI PCI Link LN11> on acpi0 pci_link19: <ACPI PCI Link LN12> on acpi0 pci_link20: <ACPI PCI Link LN13> on acpi0 pci_link21: <ACPI PCI Link LN14> on acpi0 pci_link22: <ACPI PCI Link LN15> on acpi0 pci_link23: <ACPI PCI Link LN16> on acpi0 pci_link24: <ACPI PCI Link LN17> on acpi0 pci_link25: <ACPI PCI Link LN18> on acpi0 pci_link26: <ACPI PCI Link LN19> on acpi0 pci_link27: <ACPI PCI Link LN1A> on acpi0 pci_link28: <ACPI PCI Link LN1B> on acpi0 pci_link29: <ACPI PCI Link LN1C> on acpi0 pci_link30: <ACPI PCI Link LN1D> on acpi0 pci_link31: <ACPI PCI Link LN1E> on acpi0 pci_link32: <ACPI PCI Link LN1F> on acpi0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: CDROM <SAMSUNG CD-ROM SN-124/N103> at ata1-master UDMA33 Waiting 5 seconds for SCSI devices to settle amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 69116MB (141549568 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 1x3 SCSI BP 1.1> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/amrd0s1a lock order reversal 1st 0xc1db3b34 rtentry (rtentry) _at_ /usr/src/sys/netinet/if_ether.c:445 2nd 0xc1b6d258 bge0 (network driver) _at_ /usr/src/sys/dev/bge/if_bge.c:3296 KDB: stack backtrace: kdb_backtrace(0,ffffffff,c0903a30,c0902720,c088e508) at kdb_backtrace+0x29 witness_checkorder(c1b6d258,9,c080722f,ce0) at witness_checkorder+0x54c _mtx_lock_flags(c1b6d258,0,c080722f,ce0,c1b6d000) at _mtx_lock_flags+0x5b bge_start(c1b6d000) at bge_start+0x22 if_start(c1b6d000) at if_start+0x7b ether_output_frame(c1b6d000,c1c86600,1,ffffffff,0) at ether_output_frame+0x1d9 ether_output(c1b6d000,c1c86600,df285a48,0,2) at ether_output+0x384 arprequest(c1b6d000,c1d23bc8,c1bbab14,c19964ac) at arprequest+0xd8 arpresolve(c1b6d000,c1db3b58,c1c86700,c1bbab10,df285ab8) at arpresolve+0x29c ether_output(c1b6d000,c1c86700,c1bbab10,c1db3b58,c1d23b00) at ether_output+0x66 ip_output(c1c86700,0,df285b10,0,0) at ip_output+0x6fc udp_output(c1db1168,c1c86700,0,0,c1d4d730) at udp_output+0x4ad udp_send(c1dae914,0,c1c86700,0,0) at udp_send+0x1a sosend(c1dae914,0,df285c4c,c1c86700,0) at sosend+0x5e7 kern_sendit(c1d4d730,4,df285ccc,0,0) at kern_sendit+0x104 sendit(c1d4d730,4,df285ccc,0,bfbfc155) at sendit+0x163 sendto(c1d4d730,df285d14,6,2,216) at sendto+0x4d syscall(2f,2f,2f,0,282ef7a4) at syscall+0x213 Xint0x80_syscall() at Xint0x80_syscall+0x1f --- syscall (133, FreeBSD ELF32, sendto), eip = 0x2827165b, esp = 0xbfbfba1c, ebp = 0xbfbfba48 --- fxp0: link state changed to DOWN bge1: link state changed to DOWN ------------------------------------------------------------------------ ----------------------------Received on Fri Apr 01 2005 - 12:33:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:31 UTC