Re: slow kbd input on 6-current on amd64_at_nforce3

From: Doug White <dwhite_at_gumbysoft.com>
Date: Thu, 7 Apr 2005 22:15:13 -0700 (PDT)
On Wed, 6 Apr 2005, Divacky Roman wrote:

> as I have mentioned on the list I have very slow keyboard input. it might be
> related to kbd not having an IRQ assigned. I repeat once again that it worked
> on 5.3R.

Your machine would not be PC-compliant if your keyboard controller did not
get an interrupt. In this output, it does.

Perhaps something else is tying up CPU? Or the CPU speed is defaulting to
a very low speed?  Try loading the cpufreq driver.

>
> I include verbose dmesg + this piece which didnt get into dmesg (dont know why):
>
> (with atkbd.flags=0)
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbdc: RESET_KBD return code:00fa
> kbdc: RESET_KBD status:00aa
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> kbdc: TEST_AUX_PORT status:0000
> kbdc: RESET_AUX return code:00fe
> kbdc: RESET_AUX return code:00fe
> kbdc: RESET_AUX return code:00fe
> kbdc: DIAGNOSE status:0055
> kbdc: TEST_KBD_PORT status:0000
> psm0: failed to reset the aux device.
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
>
> dmesg itself:
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-CURRENT #8: Wed Apr  6 10:31:12 UTC 2005
>     root_at_sprava:/usr/obj/usr/src/sys/MYKERNEL
> Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80538000.
> Calibrating clock(s) ... i8254 clock: 1193231 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 1808810761 Hz
> CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.81-MHz K8-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
>   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>   AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
> L1 2MB data TLB: 8 entries, fully associative
> L1 2MB instruction TLB: 8 entries, fully associative
> L1 4KB data TLB: 32 entries, fully associative
> L1 4KB instruction TLB: 32 entries, fully associative
> L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
> L2 2MB unified TLB: 0 entries, disabled/not present
> L2 4KB data TLB: 512 entries, 4-way associative
> L2 4KB instruction TLB: 512 entries, 4-way associative
> L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
> real memory  = 268369920 (255 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000635000 - 0x000000000f837fff, 253767680 bytes (61955 pages)
> avail memory = 252043264 (240 MB)
> mem: <memory>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> io: <I/O>
> cpu0 on motherboard
> pci_open(1):	mode 1 addr port (0x0cf8) is 0x80004804
> pci_open(1a):	mode1res=0x80000000 (0x80000000)
> pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=00e110de)
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> 	map[10]: type 3, range 32, base f0000000, size 27, enabled
> found->	vendor=0x10de, dev=0x00e1, revid=0xa1
> 	bus=0, slot=0, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x10de, dev=0x00e0, revid=0xa2
> 	bus=0, slot=1, func=0
> 	class=06-01-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	map[10]: type 4, range 32, base 0000e800, size  5, enabled
> 	map[20]: type 4, range 32, base 00004c00, size  6, enabled
> 	map[24]: type 4, range 32, base 00004c40, size  6, enabled
> found->	vendor=0x10de, dev=0x00e4, revid=0xa1
> 	bus=0, slot=1, func=1
> 	class=0c-05-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=a, irq=3
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 1, range 32, base fc003000, size 12, enabled
> found->	vendor=0x10de, dev=0x00e7, revid=0xa1
> 	bus=0, slot=2, func=0
> 	class=0c-03-10, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=a, irq=3
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base fc004000, size 12, enabled
> found->	vendor=0x10de, dev=0x00e7, revid=0xa1
> 	bus=0, slot=2, func=1
> 	class=0c-03-10, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=b, irq=3
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base fc005000, size  8, enabled
> found->	vendor=0x10de, dev=0x00e8, revid=0xa2
> 	bus=0, slot=2, func=2
> 	class=0c-03-20, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=c, irq=3
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 1, range 32, base fc000000, size 12, enabled
> 	map[14]: type 4, range 32, base 0000a400, size  3, enabled
> found->	vendor=0x10de, dev=0x00df, revid=0xa2
> 	bus=0, slot=5, func=0
> 	class=06-80-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
> 	intpin=a, irq=3
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[10]: type 4, range 32, base 0000a800, size  8, enabled
> 	map[14]: type 4, range 32, base 0000ac00, size  7, enabled
> 	map[18]: type 1, range 32, base fc001000, size 12, enabled
> found->	vendor=0x10de, dev=0x00ea, revid=0xa1
> 	bus=0, slot=6, func=0
> 	class=04-01-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> 	map[20]: type 4, range 32, base 0000f000, size  4, enabled
> found->	vendor=0x10de, dev=0x00e5, revid=0xa2
> 	bus=0, slot=8, func=0
> 	class=01-01-8a, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 4, range 32, base 000009e0, size  3, enabled
> 	map[14]: type 4, range 32, base 00000be0, size  2, enabled
> 	map[18]: type 4, range 32, base 00000960, size  3, enabled
> 	map[1c]: type 4, range 32, base 00000b60, size  2, enabled
> 	map[20]: type 4, range 32, base 0000c800, size  4, enabled
> found->	vendor=0x10de, dev=0x00ee, revid=0xa2
> 	bus=0, slot=9, func=0
> 	class=01-01-85, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D3  current D0
> 	map[10]: type 4, range 32, base 000009f0, size  3, enabled
> 	map[14]: type 4, range 32, base 00000bf0, size  2, enabled
> 	map[18]: type 4, range 32, base 00000970, size  3, enabled
> 	map[1c]: type 4, range 32, base 00000b70, size  2, enabled
> 	map[20]: type 4, range 32, base 0000e000, size  4, enabled
> found->	vendor=0x10de, dev=0x00e3, revid=0xa2
> 	bus=0, slot=10, func=0
> 	class=01-01-85, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
> 	intpin=a, irq=10
> 	powerspec 2  supports D0 D3  current D0
> found->	vendor=0x10de, dev=0x00e2, revid=0xa2
> 	bus=0, slot=11, func=0
> 	class=06-04-00, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
> 	lattimer=0x10 (480 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x10de, dev=0x00ed, revid=0xa2
> 	bus=0, slot=14, func=0
> 	class=06-04-00, hdrtype=0x01, mfdev=0
> 	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns)
> found->	vendor=0x1022, dev=0x1100, revid=0x00
> 	bus=0, slot=24, func=0
> 	class=06-00-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x1022, dev=0x1101, revid=0x00
> 	bus=0, slot=24, func=1
> 	class=06-00-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x1022, dev=0x1102, revid=0x00
> 	bus=0, slot=24, func=2
> 	class=06-00-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found->	vendor=0x1022, dev=0x1103, revid=0x00
> 	bus=0, slot=24, func=3
> 	class=06-00-00, hdrtype=0x00, mfdev=1
> 	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
> 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> pci0:1:1: Transition from D0 to D3
> pci0: <serial bus, USB> at device 2.0 (no driver attached)
> pci0:2:0: Transition from D0 to D3
> pci0: <serial bus, USB> at device 2.1 (no driver attached)
> pci0:2:1: Transition from D0 to D3
> pci0: <serial bus, USB> at device 2.2 (no driver attached)
> pci0:2:2: Transition from D0 to D3
> pci0: <bridge> at device 5.0 (no driver attached)
> pci0:5:0: Transition from D0 to D3
> pci0: <multimedia, audio> at device 6.0 (no driver attached)
> pci0:6:0: Transition from D0 to D3
> atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=7f ostat1=50
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
> ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata0: reset tp2 stat0=ff stat1=10 devices=0x8<ATAPI_SLAVE>
> ata0: [MPSAFE]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=60 ostat1=70
> ata1: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
> ata1: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
> ata1: reset tp2 stat0=20 stat1=30 devices=0x0
> ata1: [MPSAFE]
> atapci1: <nVidia nForce3 Pro SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc800-0xc80f irq 11 at device 9.0 on pci0
> atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc800
> atapci1: [MPSAFE]
> ata2: <ATA channel 0> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0
> atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0
> ata2: reset tp1 mask=03 ostat0=50 ostat1=00
> ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78
> ata2: stat0=0xd0 err=0x00 lsb=0x86 msb=0x78
> ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata2: [MPSAFE]
> ata3: <ATA channel 1> on atapci1
> atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960
> atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60
> ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata3: reset tp2 stat0=ff stat1=ff devices=0x0
> ata3: [MPSAFE]
> atapci2: <nVidia nForce3 Pro SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f irq 10 at device 10.0 on pci0
> atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000
> atapci2: [MPSAFE]
> ata4: <ATA channel 0> on atapci2
> atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9f0
> atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbf0
> ata4: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata4: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata4: reset tp2 stat0=ff stat1=ff devices=0x0
> ata4: [MPSAFE]
> ata5: <ATA channel 1> on atapci2
> atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x970
> atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb70
> ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata5: reset tp2 stat0=ff stat1=ff devices=0x0
> ata5: [MPSAFE]
> pcib1: <PCI-PCI bridge> at device 11.0 on pci0
> pcib1:   secondary bus     1
> pcib1:   subordinate bus   1
> pcib1:   I/O decode        0x8000-0x8fff
> pcib1:   memory decode     0xf8000000-0xf9ffffff
> pcib1:   prefetched decode 0xe0000000-0xefffffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=1
> 	map[10]: type 3, range 32, base e0000000, size 28, enabled
> pcib1: (null) requested memory range 0xe0000000-0xefffffff: good
> 	map[14]: type 4, range 32, base 00008000, size  8, enabled
> pcib1: (null) requested I/O range 0x8000-0x80ff: in range
> 	map[18]: type 1, range 32, base f9000000, size 16, enabled
> pcib1: (null) requested memory range 0xf9000000-0xf900ffff: good
> found->	vendor=0x1002, dev=0x5157, revid=0x00
> 	bus=1, slot=0, func=0
> 	class=03-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
> 	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=11
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> pci1: <display, VGA> at device 0.0 (no driver attached)
> pcib2: <PCI-PCI bridge> at device 14.0 on pci0
> pcib2:   secondary bus     2
> pcib2:   subordinate bus   2
> pcib2:   I/O decode        0x9000-0x9fff
> pcib2:   memory decode     0xfa000000-0xfbffffff
> pcib2:   prefetched decode 0xfff00000-0xfffff
> pci2: <PCI bus> on pcib2
> pci2: physical bus=2
> 	map[10]: type 1, range 32, base fb001000, size 11, enabled
> pcib2: (null) requested memory range 0xfb001000-0xfb0017ff: good
> 	map[14]: type 4, range 32, base 00009000, size  7, enabled
> pcib2: (null) requested I/O range 0x9000-0x907f: in range
> found->	vendor=0x1106, dev=0x3044, revid=0x46
> 	bus=2, slot=12, func=0
> 	class=0c-00-10, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
> 	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> 	intpin=a, irq=5
> 	powerspec 2  supports D0 D2 D3  current D0
> 	map[10]: type 4, range 32, base 00009400, size  8, enabled
> pcib2: (null) requested I/O range 0x9400-0x94ff: in range
> 	map[14]: type 1, range 32, base fb000000, size  8, enabled
> pcib2: (null) requested memory range 0xfb000000-0xfb0000ff: good
> found->	vendor=0x10ec, dev=0x8169, revid=0x10
> 	bus=2, slot=13, func=0
> 	class=02-00-00, hdrtype=0x00, mfdev=0
> 	cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
> 	lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
> 	intpin=a, irq=5
> 	powerspec 2  supports D0 D1 D2 D3  current D0
> pci2: <serial bus, FireWire> at device 12.0 (no driver attached)
> pci2:12:0: Transition from D0 to D3
> re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400
> pcib2: re0 requested I/O range 0x9400-0x94ff: in range
> pcib2: re0 requested I/O range 0x9400-0x94ff: in range
> pcib2: re0 requested I/O range 0x9400-0x94ff: in range
> re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x9400-0x94ff mem 0xfb000000-0xfb0000ff irq 5 at device 13.0 on pci2
> pcib2: re0 requested I/O range 0x9400-0x94ff: in range
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S media interface> on miibus0
> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
> re0: bpf attached
> re0: Ethernet address: 00:11:09:d9:b6:61
> re0: [MPSAFE]
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcffff,0xd0000-0xd17ff,0xd2000-0xd2fff on isa0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0: failed to reset the aux device.
> fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
> ppc0 failed to probe at irq 7 on isa0
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x1 0x1 0x1 0x1
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> isa_probe_children: probing PnP devices
> Device configuration finished.
> Timecounter "TSC" frequency 1808810761 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
> acd0: setting PIO4 on nVidia nForce3 Pro chip
> acd0: setting UDMA33 on nVidia nForce3 Pro chip
> acd0: <ATAPI CDROM/V120N> CDROM drive at ata0 as slave
> acd0:  128KB buffer, UDMA33
> acd0: Reads: CDR, CDRW, CDDA stream, packet
> acd0: Writes:
> acd0: Audio: play, 255 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad4: 76319MB <Seagate ST380013AS 3.18> at ata2-master SATA150
> ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
> GEOM: new disk ad4
> Trying to mount root from ufs:/dev/ad4s2a
> start_init: trying /sbin/init
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite_at_gumbysoft.com          |  www.FreeBSD.org
Received on Fri Apr 08 2005 - 03:15:13 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:31 UTC