SATA PHY commit

WIth the SATA PHY commit my SATA drives are not found anymore, the PATA
devices are still OK.

Here snippets from a failed boot -v:

atapci0: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,
0xb400-0 xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device
15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa800
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
device_attach: ata2 attach returned 6
ata3: <ATA channel 1> on atapci0
device_attach: ata3 attach returned 6

Here fronm a successfull boot -v (kernel from March 30):

atapci0: <VIA 6420 SATA150 controller> port 0xc000-0xc007,0xb800-0xb803,
0xb400-0 xb407,0xb000-0xb003,0xa800-0xa80f,0xa400-0xa4ff irq 20 at device
15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa800
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb800
ata2: reset tp1 mask=03 ostat0=50 ostat1=7f
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=50 stat1=ff devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb400
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb000
ata3: reset tp1 mask=03 ostat0=50 ostat1=7f
ata3-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=50 stat1=ff devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
[snip]
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad1: <Maxtor 6Y080M0/YAR51BW0> ATA-7 disk at ata2-master
ad1: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, SATA150
ata3-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad2: <Maxtor 6Y160M0/YAR51HW0> ATA-7 disk at ata3-master
ad2: 156334MB (320173056 sectors), 317632 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, SATA150

--------
Gary Jennejohn / garyjATjennejohnDOTorg gjATfreebsdDOTorg garyjATdenxDOTde