On Fri, Apr 08, 2005 at 04:49:07PM -0400, John Baldwin wrote: > On Wednesday 06 April 2005 09:09 am, Divacky Roman wrote: > > as I have mentioned on the list I have very slow keyboard input. it might > > be related to kbd not having an IRQ assigned. I repeat once again that it > > worked on 5.3R. > > > > I include verbose dmesg + this piece which didnt get into dmesg (dont know > > why): > > Do you have a dmesg from 5.3 where the keyboard works? this should be it (taken by booting 5.3R kernel on 6-c userland with a script in rc.local, but that shouldnt affect kernel): I was not able to see wheter it works or not but when I boot freebsd 5.3R installcd and run fixit shell it works so I expect this is valid (ie. working) dmesg: AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow> L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 268369920 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000992000 - 0x000000000f83ffff, 250273792 bytes (61102 pages) avail memory = 248131584 (236 MB) APIC: CPU 0 has ACPI ID 0 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: high MADT: intr override: source 14, irq 14 ioapic0: intpin 14 trigger: edge ioapic0: intpin 14 polarity: high MADT: intr override: source 15, irq 15 ioapic0: intpin 15 trigger: edge ioapic0: intpin 15 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> mem: <memory> io: <I/O> null: <null device, zero device> acpi0: <Nvidia AWRDACPI> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80004804 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00e110de) AcpiOsDerivePciId: bus 0 dev 1 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 1 func 0 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 ACPI timer looks GOOD min = 5, max = 6, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 unknown: not probed (disabled) cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf0-0xcf3,0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.APCS irq 0: [20 21 22 23] 0+ high,level,sharable 0.1.0 \\_SB_.PCI0.APCS irq 0: [20 21 22 23] 0+ high,level,sharable 0.1.1 \\_SB_.PCI0.APCF irq 0: [20 21 22 23] 0+ high,level,sharable 0.2.0 \\_SB_.PCI0.APCG irq 0: [20 21 22 23] 0+ high,level,sharable 0.2.1 \\_SB_.PCI0.APCL irq 0: [20 21 22 23] 0+ high,level,sharable 0.2.2 \\_SB_.PCI0.APCH irq 0: [20 21 22 23] 0+ high,level,sharable 0.5.0 \\_SB_.PCI0.APCJ irq 0: [20 21 22 23] 0+ high,level,sharable 0.6.0 \\_SB_.PCI0.APCK irq 0: [20 21 22 23] 0+ high,level,sharable 0.6.1 \\_SB_.PCI0.APCZ irq 0: [20 21 22 23] 0+ high,level,sharable 0.8.0 \\_SB_.PCI0.APSI irq 0: [20 21 22 23] 0+ high,level,sharable 0.9.0 \\_SB_.PCI0.APSJ irq 0: [20 21 22 23] 0+ high,level,sharable 0.10.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f0000000, size 27, enabled found-> vendor=0x10de, dev=0x00e1, revid=0xa1 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00e0, revid=0xa2 bus=0, slot=1, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000e800, size 5, enabled map[20]: type 4, range 32, base 00004c00, size 6, enabled map[24]: type 4, range 32, base 00004c40, size 6, enabled pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.APCS) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCS (references 2, priority 220): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCF (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCG (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCL (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCH (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCJ (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCK (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APCZ (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APSI (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 \\_SB_.PCI0.APSJ (references 1, priority 110): interrupts: 23 22 21 20 penalty: 110 110 110 110 ioapic0: Changing polarity for pin 23 to high pcib0: slot 1 INTA routed to irq 23 via \\_SB_.PCI0.APCS found-> vendor=0x10de, dev=0x00e4, revid=0xa1 bus=0, slot=1, func=1 class=0c-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=23 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fc002000, size 12, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.APCF) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCF (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCG (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCL (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCH (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCJ (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCK (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APCZ (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APSI (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 \\_SB_.PCI0.APSJ (references 1, priority 225): interrupts: 22 21 20 23 penalty: 220 220 220 240 ioapic0: Changing polarity for pin 22 to high pcib0: slot 2 INTA routed to irq 22 via \\_SB_.PCI0.APCF found-> vendor=0x10de, dev=0x00e7, revid=0xa1 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc003000, size 12, enabled pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.APCG) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCG (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APCL (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APCH (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APCJ (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APCK (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APCZ (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APSI (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 \\_SB_.PCI0.APSJ (references 1, priority 337): interrupts: 21 20 22 23 penalty: 330 330 340 350 ioapic0: Changing polarity for pin 21 to high pcib0: slot 2 INTB routed to irq 21 via \\_SB_.PCI0.APCG found-> vendor=0x10de, dev=0x00e7, revid=0xa1 bus=0, slot=2, func=1 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=b, irq=21 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc004000, size 8, enabled pcib0: matched entry for 0.2.INTC (src \\_SB_.PCI0.APCL) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCL (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APCH (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APCJ (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APCK (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APCZ (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APSI (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 \\_SB_.PCI0.APSJ (references 1, priority 450): interrupts: 20 22 21 23 penalty: 440 450 450 460 ioapic0: Changing polarity for pin 20 to high pcib0: slot 2 INTC routed to irq 20 via \\_SB_.PCI0.APCL found-> vendor=0x10de, dev=0x00e8, revid=0xa2 bus=0, slot=2, func=2 class=0c-03-20, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=c, irq=20 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base fc000000, size 12, enabled map[14]: type 4, range 32, base 0000c400, size 3, enabled pcib0: matched entry for 0.5.INTA (src \\_SB_.PCI0.APCH) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCH (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 \\_SB_.PCI0.APCJ (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 \\_SB_.PCI0.APCK (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 \\_SB_.PCI0.APCZ (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 \\_SB_.PCI0.APSI (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 \\_SB_.PCI0.APSJ (references 1, priority 562): interrupts: 22 21 20 23 penalty: 560 560 560 570 pcib0: slot 5 INTA routed to irq 22 via \\_SB_.PCI0.APCH found-> vendor=0x10de, dev=0x00df, revid=0xa2 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns) intpin=a, irq=22 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x10de, dev=0x00e5, revid=0xa2 bus=0, slot=8, func=0 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 000009e0, size 3, enabled map[14]: type 4, range 32, base 00000be0, size 2, enabled map[18]: type 4, range 32, base 00000960, size 3, enabled map[1c]: type 4, range 32, base 00000b60, size 2, enabled map[20]: type 4, range 32, base 0000e000, size 4, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.APSI) pcib0: possible interrupts: 20 21 22 23 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCJ (references 1, priority 675): interrupts: 21 20 23 22 penalty: 670 670 680 680 \\_SB_.PCI0.APCK (references 1, priority 675): interrupts: 21 20 23 22 penalty: 670 670 680 680 \\_SB_.PCI0.APCZ (references 1, priority 675): interrupts: 21 20 23 22 penalty: 670 670 680 680 \\_SB_.PCI0.APSI (references 1, priority 675): interrupts: 21 20 23 22 penalty: 670 670 680 680 \\_SB_.PCI0.APSJ (references 1, priority 675): interrupts: 21 20 23 22 penalty: 670 670 680 680 pcib0: slot 9 INTA routed to irq 21 via \\_SB_.PCI0.APSI found-> vendor=0x10de, dev=0x00ee, revid=0xa2 bus=0, slot=9, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns) intpin=a, irq=21 powerspec 2 supports D0 D3 current D0 found-> vendor=0x10de, dev=0x00e2, revid=0xa2 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) found-> vendor=0x10de, dev=0x00ed, revid=0xa2 bus=0, slot=14, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfc002000-0xfc002fff irq 22 at device 2.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc002000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfc003000-0xfc003fff irq 21 at device 2.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfc003000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 5.0 (no driver attached) atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=7f ostat1=50 ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata0-slave: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=ff stat1=10 devices=0x8<ATAPI_SLAVE> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] atapci1: <GENERIC ATA controller> port 0xe000-0xe00f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 21 at device 9.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe000 atapci1: [MPSAFE] ata2: channel #0 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9e0 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbe0 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2-master: stat=0xd0 err=0x00 lsb=0x86 msb=0x78 ata2-master: stat=0xd0 err=0x00 lsb=0x86 msb=0x78 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: channel #1 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x960 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb60 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff ata3-slave: stat=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xa000-0xafff pcib1: memory decode 0xf8000000-0xf9ffffff pcib1: prefetched decode 0xe0000000-0xefffffff ACPI link \\_SB_.PCI0.APC1 has invalid initial irq 5, ignoring ACPI PCI link initial configuration: \\_SB_.PCI0.APC1 irq 0: [16] 0+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 28, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xefffffff map[14]: type 4, range 32, base 0000a000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xa000-0xa0ff map[18]: type 1, range 32, base f9000000, size 16, enabled pcib1: device (null) requested decoded memory range 0xf9000000-0xf900ffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.APC1) pcib1: possible interrupts: 16 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APCJ (references 1, priority 677): interrupts: 20 22 23 21 penalty: 670 680 680 680 \\_SB_.PCI0.APCK (references 1, priority 677): interrupts: 20 22 23 21 penalty: 670 680 680 680 \\_SB_.PCI0.APCZ (references 1, priority 677): interrupts: 20 22 23 21 penalty: 670 680 680 680 \\_SB_.PCI0.APSJ (references 1, priority 677): interrupts: 20 22 23 21 penalty: 670 680 680 680 \\_SB_.PCI0.APC1 (references 1, priority 20): interrupts: 16 penalty: 20 pcib1: slot 0 INTA routed to irq 16 via \\_SB_.PCI0.APC1 found-> vendor=0x1002, dev=0x5157, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xb000-0xbfff pcib2: memory decode 0xfa000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.6.0 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.6.1 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.6.2 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.6.3 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.7.0 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.7.1 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.7.2 \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.7.3 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.8.0 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.8.1 \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.8.2 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.8.3 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.9.0 \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.9.1 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.9.2 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.9.3 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.10.0 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.10.1 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.10.2 \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.10.3 \\_SB_.PCI0.APC2 irq 0: [17] 0+ low,level,sharable 2.11.0 \\_SB_.PCI0.APC3 irq 0: [18] 0+ low,level,sharable 2.11.1 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.11.2 \\_SB_.PCI0.APC1 irq*16: [16] 0+ low,level,sharable 2.11.3 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.12.0 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.12.1 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.12.2 \\_SB_.PCI0.APC4 irq 0: [19] 0+ low,level,sharable 2.12.3 \\_SB_.PCI0.APC5 irq 0: [16] 16+ low,level,sharable 2.13.0 \\_SB_.PCI0.APC5 irq 0: [16] 16+ low,level,sharable 2.13.1 \\_SB_.PCI0.APC5 irq 0: [16] 16+ low,level,sharable 2.13.2 \\_SB_.PCI0.APC5 irq 0: [16] 16+ low,level,sharable 2.13.3 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000b000, size 8, enabled pcib2: device (null) requested decoded I/O range 0xb000-0xb0ff map[14]: type 1, range 32, base fb000000, size 8, enabled pcib2: device (null) requested decoded memory range 0xfb000000-0xfb0000ff pcib2: matched entry for 2.13.INTA (src \\_SB_.PCI0.APC5) pcib2: possible interrupts: 16 ACPI PCI link arbitrated settings: \\_SB_.PCI0.APC4 (references 10, priority 2000): interrupts: 19 penalty: 200 \\_SB_.PCI0.APC5 (references 4, priority 920): interrupts: 16 penalty: 230 \\_SB_.PCI0.APC2 (references 6, priority 720): interrupts: 17 penalty: 120 \\_SB_.PCI0.APC3 (references 6, priority 720): interrupts: 18 penalty: 120 \\_SB_.PCI0.APCJ (references 1, priority 677): interrupts: 20 21 23 22 penalty: 670 680 680 680 \\_SB_.PCI0.APCK (references 1, priority 677): interrupts: 20 21 23 22 penalty: 670 680 680 680 \\_SB_.PCI0.APCZ (references 1, priority 677): interrupts: 20 21 23 22 penalty: 670 680 680 680 \\_SB_.PCI0.APSJ (references 1, priority 677): interrupts: 20 21 23 22 penalty: 670 680 680 680 pcib2: slot 13 INTA routed to irq 16 via \\_SB_.PCI0.APC5 found-> vendor=0x10ec, dev=0x8169, revid=0x10 bus=2, slot=13, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb000 pcib2: device re0 requested decoded I/O range 0xb000-0xb0ff re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xb000-0xb0ff mem 0xfb000000-0xfb0000ff irq 16 at device 13.0 on pci2 pcib2: device re0 requested decoded I/O range 0xb000-0xb0ff miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: bpf attached re0: Ethernet address: 00:11:09:d9:b6:61 re0: [MPSAFE] unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0xca1 0xcb1 0xca1 0xca1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ahc_isa_probe 4: ioport 0x4c00 alloc failed ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xd2000-0xd2fff,0xd0000-0xd17ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0xca1 0xca1 0xca1 0xca1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1808811173 Hz quality 800 Timecounters tick every 0.976 msec lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-slave: setting PIO4 on nVidia nForce3 Pro chip ata0-slave: setting UDMA33 on nVidia nForce3 Pro chip acd0: <ATAPI CDROM/V120N> CDROM drive at ata0 as slave acd0: 128KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad4: <ST380013AS/3.18> ATA-6 disk at ata2-master ad4: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad4 ar: FreeBSD check1 failed ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 2 (ISA IRQ 0) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:81915372 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:81915435 l:74380950 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad4s1, start 32256 length 41940670464 end 41940702719 GEOM: Configure ad4s2, start 41940702720 length 38083046400 end 80023749119 GEOM: Configure ad4s2a, start 0 length 37008441344 end 37008441343 GEOM: Configure ad4s2b, start 37008441344 length 1074605056 end 38083046399 GEOM: Configure ad4s2c, start 0 length 38083046400 end 38083046399 Mounting root from ufs:/dev/ad4s2a start_init: trying /sbin/init calcru: negative runtime of -997279 usec for pid 99 (sh) calcru: negative runtime of -550697 usec for pid 207 (ifconfig) calcru: negative runtime of -993368 usec for pid 3 (g_up) calcru: negative runtime of -993368 usec for pid 3 (g_up) calcru: negative runtime of -993148 usec for pid 3 (g_up) calcru: runtime went backwards from 2886978 usec to 1980814 usec for pid 11 (idle) calcru: negative runtime of -993148 usec for pid 3 (g_up) calcru: runtime went backwards from 2886978 usec to 1980814 usec for pid 11 (idle)Received on Mon Apr 11 2005 - 08:12:50 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:31 UTC