if_ipw problems

Hello,

I have problems getting the ipw(4) wireless interface on my TP X31 to work.
I'm running -Current cvsupped and built from about 2 hours ago (i have this
 problem from long time, but hadn't the time to report it.)
The firmware is the latest from the ports.
When using exactly the same wpa_supplicant config with different wireless card 
(ralink) i can authentitace to a LinkSys WPA54G access point.
But it never works for ipw.
One thing that i discovered is that when i do ifconfig ipw0 scan
there is always one 'fake network' without SSID and with zero macaddr :

# ifconfig ipw0 scan
SSID           BSSID                      CHAN      RATE   S:N     INT CAPS
                  00:00:00:00:00:00   11          0M     0:0        0
office.ss      00:0f:66:11:13:1e   11         54M    29:0  100  EP WPA  

This looks really odd, and i can't reproduce it with other wlan cards.

wpa_supplicant.conf is :
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=wheel
eapol_version=1 or 2 (tried both of them)

network={
	ssid="office.ss"
	proto=WPA
	key_mgmt=WPA-PSK
	psk="xxxx"
}

network={
	ssid="totalterror-wlan"
	proto=WPA
	key_mgmt=WPA-PSK
	psk="yyyy"
}



Here is debug output from wpa_supplicant with if_ipw :

Initializing interface 'ipw0' conf '/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0 (from group name 'wheel')
eapol_version=2
Line: 5 - start of a new network block
ssid - hexdump_ascii(len=9):
     6f 66 66 69 63 65 2e 73 73                        office.ss       
proto: 0x1
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=11): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line: 14 - start of a new network block
ssid - hexdump_ascii(len=16):
     74 6f 74 61 6c 74 65 72 72 6f 72 2d 77 6c 61 6e   totalterror-wlan
scan_ssid=1 (0x1)
proto: 0x1
key_mgmt: 0x2
PSK (ASCII passphrase) - hexdump_ascii(len=15): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Priority group 0
   id=0 ssid='office.ss'
   id=1 ssid='totalterror-wlan'
Initializing interface (2) 'ipw0'
Own MAC address: 00:04:23:92:33:23
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=16):
     74 6f 74 61 6c 74 65 72 72 6f 72 2d 77 6c 61 6e   totalterror-wlan
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2 
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2 
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2 
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 
00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate: ssid 'office.ss' wpa ie len 24 pairwise 2 group 2 
key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 5 sec 0 usec
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:0f:66:11:13:1e ssid='office.ss' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0f:66:11:13:1e (SSID='office.ss' freq=2462 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1


---
i cancelled it at this point, but it loops like this forever(or atleast couple
 of hours :) )


I will gladly provide more info if needed.


--niki