On Tue, 2 Aug 2005, Ruslan Ermilov wrote: > On Tue, Aug 02, 2005 at 07:22:56AM -0400, Scott Robbins wrote: >> On Tue, Aug 02, 2005 at 07:00:00PM +0800, Tai-hwa Liang wrote: >> >>> On Tue, 2 Aug 2005, Scott Robbins wrote: >> >>>> On Tue, Aug 02, 2005 at 05:02:00PM +0800, Tai-hwa Liang wrote: >> >>>>> writing from stdin >>>>> Input/output error >>>>> fixating CD, please wait.. >>>>> burncd: ioctl(CDRIOCFIXATE): Input/output error >> >>>> Out of curiosity, did you try the CD anyway? >>>> I have a drive that always gives me that error, however, the burning >>>> works and produces good CD's. >>> >>> For a 600MB ISO file, it only takes 3 seconds for burncd to spew these >>> error after I entered the aforementioned command. Therefore, it's very >>> unlikely that the data was really burnt on the disc. :) >> >> >> Err, a very very fast CD writer? :) >> >> Seriously, in my case it is quite different--it shows the CD being >> burned and gets to 100 percent (and in a reasonable length of time--not >> 3 seconds.) Only then does it give me the error. >> > I recently bought myself an Asus DVD writer in addition to a > CD writer, now I have: > > # atacontrol info ata1 > Master: acd0 <COM4824/VER 1.01> ATA/ATAPI revision 0 > Slave: acd1 <ASUS DRW-1608P/1.40> ATA/ATAPI revision 5 > > I cannot use burncd(8) to burn CD-R*'s on the Asus writer, > the symptom is very much like the above. I ended up using > growisofs(1) from sysutils/dvd+rw-tools for working with > DVD's, and cdrecord(1) from sysutils/cdrtools for working > with CD's. Thanks for the pointer -- cdrtools works for me. Just confirmed that 5.4-RELEASE also has the same problem. -- Thanks, Tai-hwa LiangReceived on Wed Aug 03 2005 - 06:02:35 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:40 UTC