Hi, I think that developers would polish 6.0 more before release it so fast. Here's the output of dmesg. I have got serious problems testing this BETA2. - It crashed in install, outing to db> prompt. - The boot take a year, because of ACPI problems. - Strange VM errors. Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Wed Aug 3 08:22:24 UTC 2005 root_at_harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (797.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134152192 (127 MB) avail memory = 121569280 (115 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <NEC ND000021> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link2: <ACPI PCI Link LNKC> on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xed000000-0xedffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1450 PCI-CardBus Bridge> at device 3.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1450 PCI-CardBus Bridge> at device 3.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <multimedia, audio> at device 4.0 (no driver attached) fxp0: <Intel 82559ER Pro/100 Ethernet> port 0xef00-0xef3f mem 0xfebfe000-0xfebfefff,0xfebc0000-0xfebdffff irq 10 at device 5.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:10:a4:90:52:e0 pci0: <simple comms, UART> at device 5.1 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 9 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <Generic IRDA-compatible device> port 0x2e8-0x2ef irq 3 drq 0 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37b irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 acpi_lid0: <Control Method Lid Switch> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 797870764 Hz quality 800 Timecounters tick every 1.000 msec ad0: 19077MB <HITACHI DK23BA-20E 00F0A0A1> at ata0-master UDMA33 afd0: REMOVABLE <LS-120 SLIM4 00 UHD Floppy/C929M919> at ata0-slave PIO4 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302/1H13> at ata1-master PIO4 ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad0s1a WARNING: was not properly dismounted ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex WARNING: was not properly dismounted WARNING: was not properly dismounted WARNING: was not properly dismounted ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex ACPI-0169: *** Error: Could not acquire interpreter mutex lock order reversal 1st 0xc097b240 UMA lock (UMA lock) _at_ /usr/src/sys/vm/uma_core.c:1494 2nd 0xc1060144 system map (system map) _at_ /usr/src/sys/vm/vm_map.c:2317 KDB: stack backtrace: kdb_backtrace(0,ffffffff,c0930358,c0930498,c08bace4) at kdb_backtrace+0x29 witness_checkorder(c1060144,9,c08714b6,90d) at witness_checkorder+0x564 _mtx_lock_flags(c1060144,0,c08714b6,90d) at _mtx_lock_flags+0x5b _vm_map_lock(c10600c0,c08714b6,90d) at _vm_map_lock+0x26 vm_map_remove(c10600c0,c1cc6000,c1cc7000,c8398c08,c077ee01) at vm_map_remove+0x1f kmem_free(c10600c0,c1cc6000,1000,c8398c38,c077e7ae) at kmem_free+0x25 page_free(c1cc6000,1000,2) at page_free+0x29 zone_drain(c104a960) at zone_drain+0x26a zone_foreach(c077e544,c8398cec,c079062f,c1341c00,c8398c74) at zone_foreach+0x37 uma_reclaim(c1341c00,c8398c74,0,c0926980,c8398c80) at uma_reclaim+0x12 vm_pageout_scan(0,c097b6a0,0,c08729a3,5c3) at vm_pageout_scan+0x103 vm_pageout(0,c8398d38,0,c07913e8,0) at vm_pageout+0x2c3 fork_exit(c07913e8,0,c8398d38) at fork_exit+0xa0 fork_trampoline() at fork_trampoline+0x8 --- trap 0x1, eip = 0, esp = 0xc8398d6c, ebp = 0 ---Received on Mon Aug 08 2005 - 13:38:32 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:41 UTC