At 12:20 AM 09/08/2005, Sam Leffler wrote: >I much prefer cryptotest for exercising the hardware. If you increase the >number of concurrent threads (-t I think) you can really load the device. Where can I find a copy of that ? >I wouldn't be surprised if there were an smp locking bug in the crypto >code as I'm not sure it's been well-exercised recently and with more of >the kernel coming out from under Giant the locking within the subsystem is >getting more testing. On RELENG_4, on the 4way PIII, It seems to function just fine. However, one thing I have noticed is that it seems to have a lot of noirq errors where as I never see those on other boxes. RELENG_5 and above just lockup doing for i in `jot 40 1` do echo $i /usr/bin/openssl aes-128-cbc -in big -k pass | ssh -c aes128-cbc mdtancsa_at_127.0.0.1 "cat - > /dev/null" done well before 5 iterations. hippo# hifnstats input 2998255856 bytes 946932 packets output 2998243536 bytes 946931 packets invalid 0 nomem 0 abort 0 noirq 636235 unaligned 0 totbatch 0 maxbatch 0 nomem: map 0 load 0 mbuf 0 mcl 0 cr 0 sd 0 hippo# hippo# dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.11-RELEASE #1: Tue Aug 9 14:25:16 EDT 2005 mdtancsa_at_hippo.sentex.ca:/usr/src/sys/compile/hippo Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x672 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147475456 (2097144K bytes) config> q avail memory = 2087866368 (2038932K bytes) Changing APIC ID for IO APIC #0 from 0 to 4 on chip Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu2 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu3 (AP): apic id: 2, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 4, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc03c7000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03c709c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 11 entries at 0xc00fc7a0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82454NX PXB#0, Bus#A> on motherboard IOAPIC #0 intpin 14 -> irq 2 IOAPIC #0 intpin 11 -> irq 5 pci0: <PCI bus> on pcib0 isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> at device 2.1 on pci0 atapci0: ATA channel disabled by BIOS pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 2.2 irq 0 Timecounter "PIIX" frequency 3579545 Hz chip0: <Intel 82371AB Power management controller> port 0x850-0x85f at device 2.3 on pci0 pci0: <ATI Mach64-GI graphics accelerator> at 4.0 ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfe94b000-0xfe94bfff irq 2 at device 6.0 on pci0 aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs hifn0 mem 0xfe940000-0xfe947fff,0xfe948000-0xfe949fff,0xfe94a000-0xfe94afff irq 5 at device 8.0 on pci0 hifn0: Hifn 7955, rev 0, 32KB dram em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port 0xe4c0-0xe4ff mem 0xfe900000-0xfe91ffff,0xfe920000-0xfe93ffff ir0 em0: Speed:N/A Duplex:N/A pcib3: <Intel 82454NX PCI Expander Bridge> at device 18.0 on pci0 pcib4: <Intel 82454NX PCI Expander Bridge> at device 19.0 on pci0 pcib5: <Intel 82454NX PCI Expander Bridge> at device 20.0 on pci0 pcib1: <Intel 82454NX PXB#0, Bus#B> on motherboard IOAPIC #0 intpin 20 -> irq 11 pci1: <PCI bus> on pcib1 ahc1: <Adaptec aic7860 Ultra SCSI adapter> port 0xfc00-0xfcff mem 0xfeb00000-0xfeb00fff irq 11 at device 8.0 on pci1 aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs pcib2: <Intel 82454NX PXB#1, Bus#A> on motherboard pci2: <PCI bus> on pcib2 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd0000-0xd0fff,0xd4000-0xd47ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! pass3 at ahc0 bus 0 target 6 lun 0 pass3: <DELL 1x3 U2W SCSI BP 5.39> Fixed Processor SCSI-2 device pass3: 3.300MB/s transfers da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST318203LC 0001> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST318203LC 0001> Fixed Direct Access SCSI-2 device da2: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da2: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST318203LC 0001> Fixed Direct Access SCSI-2 device da1: 80.000MB/s transfers (40.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) Mounting root from ufs:/dev/da1s1a cd0 at ahc1 bus 0 target 5 lun 0 cd0: <NEC CD-ROM DRIVE:465 1.25> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present em0: Link is up 1000 Mbps Full Duplex em0: Link is up 1000 Mbps Full Duplex hippo# hippo#Received on Tue Aug 09 2005 - 16:55:32 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:41 UTC