Re: 6.0-CURRENT SNAP004 hangs on amr (patch)

At 04:37 PM 08/08/2005, Joao Barros wrote:
>On 8/8/05, John Baldwin <jhb_at_freebsd.org> wrote:
> > On Sunday 07 August 2005 10:26 pm, Joao Barros wrote:
> > > On 7/29/05, John Baldwin <jhb_at_freebsd.org> wrote:
> > > > On Sunday 24 July 2005 07:16 pm, Joao Barros wrote:
> > > > > Would it be possible to have this in BETA2?
> > > >
> > > > Can you try this patch?  You'll need to set hw.apic.enable_extint=1 in
> > > > the loader via loader.conf or a manual set command:
> > >
> > > John,
> > >
> > > I saw you commited this to RELENG_6 and today, finally I got the time
> > > to install 5.4 on the machine, as it was systemless, cvsup to RELENG_6
> > > and build a kernel.
> > > I'm sorry to report that setting hw.apic.enable_extint to 1 didn't
> > > work. I tried to boot with and without acpi.
> >
> > Ok, so I'm assuming that 5.4 works but RELENG_6 does not?  Do you have 
> verbose
> > dmesg's from both cases so that I can compare them?


I have played a bit more with my 4way dell that seems to have similar 
problems.  There are still issues with 5.x and 6.x for me if I add another 
card, or move around the existing cards.  To see if it was specifically the 
AMR, I pulled it, but the box still has issues booting to Beta 2. Soon as 
it sees the IDE controller, it kills the box. I tried booting a Knoppix CD 
to see if Linux has a similar problem, but it seems to deal just fine with 
the box as does RELENG_4.  I have dmesgs from all 3 boxes at
http://www.tancsa.com/dell/

         ---Mike