I'm seeing messages like this on bootup: ata2: FAILURE - oversized DMA transfer attempt 8704 > 7680 I know FreeBSD has some issues with the SiI SATA controllers so I'm not sure if this is already known, but essentially under high load the machine either hardlocks or simply reboots. I've tried custom and generic kernels as well as reinstalling to no avail. This system, like the subject says, is running FreeBSD/amd64 6.0-BETA2. Should I disable DMA? Is there a workaround? Dmesg from GENERIC kernel is as follows: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #0: Tue Aug 2 22:37:52 UTC 2005 root_at_portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2080.20-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0xf48 Stepping = 8 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow> real memory = 2147418112 (2047 MB) avail memory = 2062671872 (1967 MB) ACPI APIC Table: <Nvidia AWRDACPI> ioapic0 <Version 1.1> irqs 0-23 on motherboard acpi0: <Nvidia AWRDACPI> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNK1> irq 3 on acpi0 pci_link1: <ACPI PCI Link LNK2> irq 10 on acpi0 pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNK4> on acpi0 pci_link4: <ACPI PCI Link LNK5> irq 7 on acpi0 pci_link5: <ACPI PCI Link LUBA> irq 4 on acpi0 pci_link6: <ACPI PCI Link LUBB> irq 4 on acpi0 pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0 pci_link8: <ACPI PCI Link LAPU> on acpi0 pci_link9: <ACPI PCI Link LACI> on acpi0 pci_link10: <ACPI PCI Link LMCI> on acpi0 pci_link11: <ACPI PCI Link LSMB> irq 5 on acpi0 pci_link12: <ACPI PCI Link LUB2> irq 4 on acpi0 pci_link13: <ACPI PCI Link LFIR> on acpi0 pci_link14: <ACPI PCI Link L3CM> on acpi0 pci_link15: <ACPI PCI Link LIDE> on acpi0 pci_link16: <ACPI PCI Link LSID> on acpi0 pci_link17: <ACPI PCI Link APC1> irq 16 on acpi0 pci_link18: <ACPI PCI Link APC2> irq 17 on acpi0 pci_link19: <ACPI PCI Link APC3> irq 18 on acpi0 pci_link20: <ACPI PCI Link APC4> irq 19 on acpi0 pci_link21: <ACPI PCI Link APC5> irq 16 on acpi0 pci_link22: <ACPI PCI Link APCF> irq 0 on acpi0 pci_link23: <ACPI PCI Link APCG> irq 0 on acpi0 pci_link24: <ACPI PCI Link APCH> irq 0 on acpi0 pci_link25: <ACPI PCI Link APCI> irq 0 on acpi0 pci_link26: <ACPI PCI Link APCJ> irq 0 on acpi0 pci_link27: <ACPI PCI Link APCK> irq 0 on acpi0 pci_link28: <ACPI PCI Link APCS> irq 23 on acpi0 pci_link29: <ACPI PCI Link APCL> irq 0 on acpi0 pci_link30: <ACPI PCI Link APCM> irq 0 on acpi0 pci_link31: <ACPI PCI Link AP3C> irq 0 on acpi0 pci_link32: <ACPI PCI Link APCZ> irq 0 on acpi0 pci_link33: <ACPI PCI Link APSI> irq 0 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0xcf0-0xcf3 on acpi0 pci0: <ACPI PCI bus> on pcib0 pci_link22: Unable to choose an IRQ pci_link23: Unable to choose an IRQ pci_link29: Unable to choose an IRQ pci_link24: Unable to choose an IRQ agp0: <NVIDIA nForce3 AGP Controller> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <nVidia nForce3 USB Controller> mem 0xfc002000-0xfc002fff irq 20 at device 2.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <nVidia nForce3 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <nVidia nForce3 USB Controller> mem 0xfc003000-0xfc003fff irq 21 at device 2.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <nVidia nForce3 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc004000-0xfc0040ff irq 22 at device 2.2 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered uhub3: vendor 0x0543 product 0x1167, class 9/0, rev 2.00/ff.ff, addr 2 uhub3: multiple transaction translators uhub3: 4 ports with 4 removable, self powered ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 3, iclass 7/1 ulpt0: using bi-directional mode nve0: <NVIDIA nForce MCP3 Networking Adapter> port 0xd000-0xd007 mem 0xfc000000-0xfc000fff irq 20 at device 5.0 on pci0 nve0: Ethernet address 00:0d:61:14:6f:39 miibus0: <MII bus> on nve0 rlphy0: <RTL8201L 10/100 media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto nve0: Ethernet address: 00:0d:61:14:6f:39 nve0: [GIANT-LOCKED] atapci0: <nVidia nForce3 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 8.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcib1: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <multimedia, audio> at device 8.0 (no driver attached) pci1: <input device> at device 8.1 (no driver attached) fwohci0: <1394 Open Host Controller Interface> mem 0xfb005000-0xfb0057ff,0xfb000000-0xfb003fff irq 17 at device 8.2 on pci1 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:02:3c:00:21:04:e6:cc fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:02:3c:04:e6:cc fwe0: Ethernet address: 02:02:3c:04:e6:cc fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa800-0xa8ff mem 0xfb004000-0xfb004fff irq 18 at device 10.0 on pci1 ahc0: [GIANT-LOCKED] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs atapci1: <SiI 3512 SATA150 controller> port 0xac00-0xac07,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc0f mem 0xfb006000-0xfb0061ff irq 17 at device 13.0 on pci1 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <display, VGA> at device 0.0 (no driver attached) pci2: <display> at device 0.1 (no driver attached) fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd7fff,0xd8000-0xdc7ff,0xdd000-0xe27ff on isa0 ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 2, iclass 3/1 ums0: 7 buttons and Z dir. Timecounter "TSC" frequency 2080199228 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: DVDR <TEAC DV-W516GA/C4S2> at ata1-slave UDMA33 ad4: 286188MB <Maxtor 6B300S0 BANC1B10> at ata2-master SATA150 ata2: FAILURE - oversized DMA transfer attempt 8704 > 7680 ad4: setting up DMA failed da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST118273LW 6246> Fixed Direct Access SCSI-2 device da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit) da0: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad4s2a WARNING: / was not properly dismounted pcm0: <Creative Audigy (EMU10K2)> port 0xa000-0xa01f irq 16 at device 8.0 on pci1 pcm0: <TriTech TR28602 AC97 Codec> nve0: link state changed to DOWN nve0: link state changed to UP nve0: promiscuous mode enabled nve0: promiscuous mode disabled -- Best wishes, Alexander G. Chamandy Webmaster www.bsdfreak.org Your Source For BSD News! Hosted by Envescent, LLC www.envescent.comReceived on Wed Aug 10 2005 - 11:08:29 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:41 UTC