Re: Qlogic (isp driver) gone mad on 6.0

Sounds more like a problem with the target. Make the limit 255- not 256.


.
> 
> Well, the system boots faster as it doesn't have to probe 16k devices,
> but there's still one problem - it sees the correct 3 luns per device,
> but then adds a 'fake' device at lun 256 which is essentially the same
> as the first lun.  Here's some more info:
> 
> # camcontrol devlist
> <PE/PV 1x3 SCSI BP 1.1>            at scbus0 target 6 lun 0 (pass0,ses0)
> <JetStor snappod1-vol1 R001>       at scbus2 target 0 lun 0 (pass1,da0)
> <JetStor snappod1-vol2 R001>       at scbus2 target 0 lun 1 (pass2,da1)
> <JetStor snappod1-vol3 R001>       at scbus2 target 0 lun 2 (pass3,da2)
> <JetStor snappod1-vol1 R001>       at scbus2 target 0 lun 256 (pass4,da3)
> <JetStor snappod2-vol1 R001>       at scbus2 target 2 lun 0 (pass5,da4)
> <JetStor snappod2-vol2 R001>       at scbus2 target 2 lun 1 (pass6,da5)
> <JetStor snappod2-vol3 R001>       at scbus2 target 2 lun 2 (pass7,da6)
> <JetStor snappod2-vol1 R001>       at scbus2 target 2 lun 256 (pass8,da7)
> <JetStor snappod3-vol1 R001>       at scbus2 target 3 lun 0 (pass9,da8)
> <JetStor snappod3-vol2 R001>       at scbus2 target 3 lun 1 (pass10,da9)
> <JetStor snappod3-vol3 R001>       at scbus2 target 3 lun 2 (pass11,da10)
> <JetStor snappod3-vol1 R001>       at scbus2 target 3 lun 256 (pass12,da11)
> <JetStor snappod1-vol1 R001>       at scbus3 target 0 lun 0 (pass13,da12)
> <JetStor snappod1-vol2 R001>       at scbus3 target 0 lun 1 (pass14,da13)
> <JetStor snappod1-vol3 R001>       at scbus3 target 0 lun 2 (pass15,da14)
> <JetStor snappod1-vol1 R001>       at scbus3 target 0 lun 256 (pass16,da15)
> <JetStor snappod2-vol1 R001>       at scbus3 target 1 lun 0 (pass17,da16)
> <JetStor snappod2-vol2 R001>       at scbus3 target 1 lun 1 (pass18,da17)
> <JetStor snappod2-vol3 R001>       at scbus3 target 1 lun 2 (pass19,da18)
> <JetStor snappod2-vol1 R001>       at scbus3 target 1 lun 256 (pass20,da19)
> <JetStor snappod3-vol1 R001>       at scbus3 target 3 lun 0 (pass21,da20)
> <JetStor snappod3-vol2 R001>       at scbus3 target 3 lun 1 (pass22,da21)
> <JetStor snappod3-vol3 R001>       at scbus3 target 3 lun 2 (pass23,da22)
> <JetStor snappod3-vol1 R001>       at scbus3 target 3 lun 256 (pass24,da23)
> 
> 
> You can see that the 'lun 256' marked devices are duplicates.
> 
> Eric
> 
> 
> 
> 
> --
> ------------------------------------------------------------------------
> Eric Anderson        Sr. Systems Administrator        Centaur Technology
> Anything that works is better than anything that doesn't.
> ------------------------------------------------------------------------
>