Ever since upgrading from 5.4 to RELENG_6 (and recompiling all ports), one of my machines doesn't like to reboot anymore. All services appear to be successfully killed prior to initiating the reboot. I see the following messages when rebooting (this from 6.0-BETA2): Aug 21 23:57:38 optimator syslogd: exiting on signal 15 Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...4 4 3 1 0 0 0 done All buffers synced. /usr: unmount pending error: blocks -8 files -8 /tmp: unmount pending error: blocks 0 files -1 unmount of /dev failed (BUSY) Uptime: 5d23h58m22s pfs_vncache_unload(): 1 entries remaining Shutting down ACPI After printing "Shutting down ACPI" the machine just hangs. It rebooted fine with 5.4. I've also noticed a several second hang when booting just after printing kernel date and version. Are these problems ACPI related? What about the unmount pending errors and the pfs_vncache_unload message? See attached dmesg. -- Jonathan Noack | noackjr_at_alumni.rice.edu | OpenPGP: 0x991D8195 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA2 #4: Sun Aug 21 02:51:46 CDT 2005 root_at_optimator.noacks.org:/usr/obj/usr/src/sys/OPTIMATOR Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (931.81-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147418112 (2047 MB) avail memory = 2096500736 (1999 MB) ACPI APIC Table: <VIA694 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ACPI: overriding DSDT/SSDT with custom table ACPI-0377: *** Info: Table [DSDT] replaced by host OS ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA694 AWRDACPI> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 12 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 7.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <bridge> at device 7.4 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xcc00-0xcc3f mem 0xd9020000-0xd903ffff,0xd9000000-0xd901ffff irq 17 at device 11.0 on pci0 em0: Ethernet address: 00:07:e9:0d:67:2c em0: Speed:N/A Duplex:N/A pci0: <network, ethernet> at device 12.0 (no driver attached) atapci1: <HighPoint HPT370 UDMA100 controller> port 0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc07,0xe000-0xe003,0xe400-0xe4ff irq 18 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd4000-0xd4fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited acd0: DVDROM <JLMS XJ-HD163D/GHR8> at ata0-master UDMA33 ad4: 190782MB <HDS722525VLAT80 V36OA6MA> at ata2-master UDMA100 ad6: 190782MB <HDS722525VLAT80 V36OA60A> at ata3-master UDMA100 ar0: 190782MB <HighPoint v2 RocketRAID RAID1> status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ar0s1a em0: link state changed to UP
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:41 UTC