Am 27.08.2005 um 23:23 schrieb Stefan Bethke: > Am 27.08.2005 um 21:54 schrieb Stefan Bethke: >> I'm trying to boot a Lex barebone (VIA Eden based) off a CF card >> that shows up as a ad3. So far, the box has been booting off a >> 2.5" disk. boot and loader are RELENG_6 from Thursday. A 5-stable >> dmesg is attached below. >> >> When trying to boot off the CF, boot will load loader. Then the >> machine resets. >> >> I've tried loading /boot/kernel/kernel directly. It appears to >> load the kernel, but then I get a BTX panic. (I currently don't >> have a serial console, but I could try to transcribe the output if >> that would help.) >> >> How can I best debug this? Should I try earlier or later versions? >> >> I'm a bit reluctant to update loader on the hard disk: if the >> update makes the system unbootable, I would lose my router... > > I've put the 5-stable boot and loader on the CF card, and this > loader seems to work OK. However, the machines reboots immediately > once the RELENG_6 kernel is loaded and loader tries to boot it. 5-stable kernel boots up to "Mounting froot from ufs:/dev/ad3s1a", then hangs. I can break to the debugger, but I'm not sure what I should be looking at... Thanks, Stefan -- Stefan Bethke <stb_at_lassitu.de> Fon +49 170 346 0140Received on Sat Aug 27 2005 - 19:32:58 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:42 UTC