Re: [PATCH] nForce2 SMBus support

I has applied this patch to my RELENG_6 and it seems to work (Abit NF7
motherboard)

dmesg:
amdpm0: <nForce2 MCP-T SMBus Controller> port
0xe400-0xe41f,0x5000-0x501f irq 11 at device 1.1 on pci0
smbus0: <System Management Bus> on amdpm0
smb0: <SMBus generic I/O> on smbus0
amdpmsub0: <nForce2 MCP-T Slave SMBus Controller> on amdpm0
smbus1: <System Management Bus> on amdpmsub0
smb1: <SMBus generic I/O> on smbus1


But testing:
# mbmon -S -d
SMBus[NVidia nForce2] found, but No HWM available on it!!
InitMBInfo: Unknown error: 0

# mbmon
Temp.= 26.0, 42.5,  0.0; Rot.= 2481,    0,    0
Vcore = 1.63, 2.64; Volt. = 3.30, 5.03, 12.16, -11.87, -5.05

What additional tests can I do?

2005/12/6, Artemiev Igor <ai_at_bmc.brk.ru>:
>
>
> I add pseudo-device amdpmsub because nForce2 have two SMBus
> interfaces. Patch here:
>
> http://bmc.brk.ru/~ai/patches/amdpm.nforce2_support.diff
>
> dmesg output:
>
> amdpm0: <nForce2 MCP-T SMBus Controller> port
> 0xdc00-0xdc1f,0x5000-0x501f,0x5500 -0x551f irq 5 at device 1.1 on pci0
> smbus0: <System Management Bus> on amdpm0
> smb0: <SMBus generic I/O> on smbus0
> amdpmsub0: <nForce2 MCP-T Slave SMBus Controller> on amdpm0
> smbus1: <System Management Bus> on amdpmsub0
> smb1: <SMBus generic I/O> on smbus1
>
> I`ve tested it with xmbmon and all works fine.
>
> --
> iprefetch ai
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
>