> On Monday 24 January 2005 04:25 am, wsk wrote: >> hi,folks: >> >> after installed RocketPort uPCI card into my box;it >> dumps the follow eror msgs: >> >> rp0: <RocketPort PCI> port 0xde00-0xdeff,0xdd80-0xddff mem >> 0xfcedff80-0xfcedffff >> irq 19 at device 10.0 on pci2 >> rp0: failed: rid 0x10 is memory, requested 4 >> rp0: ioaddr mapping failed for RocketPort(PCI). >> device_attach: rp0 attach returned 6 > > Looks like you need to change the driver to map its io addresses from a > different BAR for this chip ID since BAR 0 is memory, not I/O. I'm not > sure > this driver will work with this card, btw, but you can try changing this > line > in the attach function of sys/dev/rp/rp_pci.c: > > ctlp->io_rid[0] = 0x10; > > to use either '0x14' or '0x18' rather than '0x10' and see if it >works. It must use '0x18' . or the driver can't map the ports: here'is my boot mesgs by set '0x14' Feb 5 16:21:20 wsk kernel: rp0: <RocketPort PCI> port 0xde00-0xdeff,0xdd80-0xddff mem 0xfcedff80-0xfcedffff irq 19 at device 10.0 on pci2 Feb 5 16:21:20 wsk kernel: RocketPort0 (Version 3.02) 0 ports. and after set '0x18'. the boot mesgs: Feb 5 16:47:59 wsk kernel: rp0: <RocketPort PCI> port 0xde00-0xdeff,0xdd80-0xddff mem 0xfcedff80-0xfcedffff irq 19 at device 10.0 on pci2 Feb 5 16:47:59 wsk kernel: RocketPort0 (Version 3.02) 8 ports. and thanks again ----------------------------------------- This email was sent using FREE Catholic Online Webmail! http://webmail.catholic.org/Received on Sat Feb 05 2005 - 08:01:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:27 UTC