Hi, Søren >>> On Thu, 03 Feb 2005 21:52:57 +0100, Søren Schmidt <sos_at_DeepCore.dk> said: > ATA-mkIII first official snapshot. [...] > No changes are needed to your config file, unless you want ATA as modules. I've tested your patches using same config file as before, and it seems work fine except on resume. After suspend, my ThinkPad X40 now hangs with following logs (copied by hand): (Fn + F4 key combo to enter suspend) acpi_ec0: info: new max delay is 80 us IBM:NOTIFY:80 notify:1004 acpi_lid0: wake_prep enabled for \_SB_.LID_ (S3) acpi_button0: wake_prep enabled for \_SB_.SLPB (S3) (Fn key to resume back ) AcpiOsDerivePciId: bus 0 dev 31 func 1 ============ acpi_printcpu() debug dump ==== gdt[0077:c0667c20] idt[07ff:c0677fe0] ldt[0030] tr[0020] elf[00000086] eax[00000001] ebx[00000000] ecx[00000000] edx[00000004] esi[c1beedc8] edi[80045003] ebp[d4ebbc3c] esp[d4ebbc10] cr0[8005003b] cr2[0804a314] cr3[14f1b000] cr4[00000691] cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010] ============ acpi_printcpu() debug dump ==== gdt[0077:c0667c20] idt[07ff:c0667fe0] ldt[0030] tr[0020] elf[00000002] eax[00000046] ebx[00000000] ecx[00000000] edx[c1991cf0] esi[c1beedc8] edi[80045003] ebp[d4ebbc3c] esp[d4ebbc10] cr0[8005003b] cr2[0804a314] cr3[14f1b000] cr4[00000091] cs[0008] ds[0010] es[0010] fs[0018] gs[008f] ss[0010] acpi_lid0: run_prep cleaned up for \_SB_.LID_ acpi_button0: run_prep cleand up for \_SB_.SLPB acpi_ec0: info: new max delay is 100 us While ``bus 0 dev 31 func 1'' is atapic0 (Intel ICH4 UDMA100 controller), it seems there's no helpful ATA related message though. However, I got curious behaviors, i.e. o Hard disk actively drives, thus HDD indicator nearly holds on lighting o A status indicator for event blinks on and off, periodicaly I'm using kernel & modules as of yesterday (HEAD). Without applying your patches, the resume works fine. Is this problem included in your task list, or am I alone? My config file and complete dmesg on start up (booted with -v flag) is attached below, -- rushani # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $rushani: TPX40,v 1.6 2004/12/08 09:27:42 hideyuki Exp $ # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.413.2.6.2.2 2004/10/24 18:02:52 scottl Exp $ machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident TPX40 # To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" # Default places to look for devices. #makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols options SCHED_4BSD # 4BSD scheduler options INET # InterNETworking options INET6 # IPv6 communications protocols options FFS # Berkeley Fast Filesystem options SOFTUPDATES # Enable FFS soft updates support options UFS_ACL # Support for access control lists options UFS_DIRHASH # Improve performance on big directories #options MD_ROOT # MD is a potential root device #options NFSCLIENT # Network Filesystem Client #options NFSSERVER # Network Filesystem Server #options NFS_ROOT # NFS usable as /, requires NFSCLIENT #options MSDOSFS # MSDOS Filesystem #options CD9660 # ISO 9660 Filesystem #options PROCFS # Process filesystem (requires PSEUDOFS) #options PSEUDOFS # Pseudo-filesystem framework options GEOM_GPT # GUID Partition Tables. options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 # Compatible with FreeBSD4 options SCSI_DELAY=2000 # Delay (in ms) before probing SCSI options KTRACE # ktrace(1) support #options SYSVSHM # SYSV-style shared memory #options SYSVMSG # SYSV-style message queues #options SYSVSEM # SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev #options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. #options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options ADAPTIVE_GIANT # Giant mutex is adaptive. options DEVICE_POLLING # polling(4) options SC_DISABLE_REBOOT # Disable reboot key sequence options INCLUDE_CONFIG_FILE # Include this file in kernel # Debugging for use in -current options KDB # Enable kernel debugger support. options DDB # Support DDB. #options GDB # Support remote GDB. options INVARIANTS # Enable calls of extra sanity checking options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS options WITNESS # Enable checks to detect deadlocks and cycles options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed #device apic # I/O APIC # Bus support. Do not remove isa, even if you have no isa slots device isa #device eisa device pci # Floppy drives #device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives #device ataraid # ATA RAID drives #device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID # Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) #device ch # SCSI media changers device da # Direct Access (disks) #device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers interfaced to the SCSI subsystem #device amr # AMI MegaRAID #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options #device hptmv # Highpoint RocketRAID 182x #device iir # Intel Integrated RAID #device ips # IBM (Adaptec) ServeRAID #device mly # Mylex AcceleRAID/eXtremeRAID #device twa # 3ware 9000 series PATA/SATA RAID # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device ida # Compaq Smart RAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor #device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # PCMCIA and cardbus bridge support #device cbb # cardbus (yenta) bridge #device pccard # PC Card (16-bit) bus #device cardbus # CardBus (32-bit) bus # Serial (COM) ports #device sio # 8250, 16[45]50 based serial ports # Parallel port #device ppc #device ppbus # Parallel port bus (required) #device lpt # Printer #device plip # TCP/IP over parallel #device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device ixgb # Intel PRO/10GbE Ethernet Card #device txp # 3Com 3cR990 (``Typhoon'') #device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! #device miibus # MII bus support #device bfe # Broadcom BCM440x 10/100 Ethernet #device bge # Broadcom BCM570xx Gigabit Ethernet #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device lge # Level 1 LXT1001 gigabit ethernet #device nge # NatSemi DP83820 gigabit ethernet #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') #device re # RealTek 8139C+/8169/8169S/8110S #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit Ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 ``EPIC'') #device vge # VIA VT612x gigabit ethernet #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard NICs included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' #device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of Ethernet chips #device xe # Xircom pccard Ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices. device loop # Network loopback #device mem # Memory and kernel memory devices #device io # I/O device #device random # Entropy device device ether # Ethernet support #device sl # Kernel SLIP #device ppp # Kernel PPP #device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) #device md # Memory "disks" #device gif # IPv6 and IPv4 tunneling #device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) # System Management Bus (SMB) device smbus device ichsmb device smb #device ath #device ath_hal #device ath_rate_onoe #device wlan #device wlan_wep Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #10: Sun Feb 6 21:23:04 JST 2005 hideyuki_at_tpx40.rushani.jp:/usr/obj/usr/src/sys/TPX40 WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc08fb000. Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc08fb1c4. Preloaded elf module "/boot/kernel/ntfs.ko" at 0xc08fb270. Preloaded elf module "/boot/kernel/nullfs.ko" at 0xc08fb31c. Preloaded elf module "/boot/kernel/linux.ko" at 0xc08fb3c8. Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc08fb474. Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc08fb520. Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc08fb5cc. Preloaded elf module "/boot/kernel/if_tun.ko" at 0xc08fb678. Preloaded elf module "/boot/kernel/ipfw.ko" at 0xc08fb724. Preloaded elf module "/boot/kernel/if_em.ko" at 0xc08fb7d0. Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc08fb87c. Preloaded elf module "/boot/kernel/elink.ko" at 0xc08fb928. Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08fb9d4. Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08fba80. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08fbb2c. Preloaded elf module "/boot/kernel/sound.ko" at 0xc08fbbd8. Preloaded elf module "/boot/kernel/usb.ko" at 0xc08fbc84. Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08fbd2c. Preloaded elf module "/boot/kernel/umass.ko" at 0xc08fbdd8. Preloaded elf module "/boot/kernel/umodem.ko" at 0xc08fbe84. Preloaded elf module "/boot/kernel/ucom.ko" at 0xc08fbf30. Preloaded elf module "/boot/kernel/agp.ko" at 0xc08fbfdc. Preloaded elf module "/boot/kernel/random.ko" at 0xc08fc084. Preloaded elf module "/boot/kernel/speaker.ko" at 0xc08fc130. Preloaded elf module "/boot/kernel/if_ath.ko" at 0xc08fc1dc. Preloaded elf module "/boot/kernel/ath_rate.ko" at 0xc08fc288. Preloaded elf module "/boot/kernel/ath_hal.ko" at 0xc08fc338. Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc08fc3e4. Preloaded elf module "/boot/kernel/acpi_ibm.ko" at 0xc08fc494. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08fc544. Preloaded elf module "/boot/kernel/io.ko" at 0xc08fc5f0. Preloaded elf module "/boot/kernel/mem.ko" at 0xc08fc698. Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08fc740. Preloaded elf module "/boot/kernel/exca.ko" at 0xc08fc7e8. Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08fc894. Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08fc940. Preloaded elf module "/boot/modules/est.ko" at 0xc08fc9ec. Enhanced Speedstep running at 1400 MHz Calibrating clock(s) ... i8254 clock: 1193169 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1395476624 Hz CPU: Intel(R) Pentium(R) M processor 1.40GHz (1395.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6 Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> real memory = 527302656 (502 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001edd8fff, 505102336 bytes (123316 pages) avail memory = 506757120 (483 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6fd0 bios32: Entry = 0xfd740 (c00fd740) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd6d0+0x1f8 pnpbios: Found PnP BIOS data at 0xc00f7050 pnpbios: Entry = f0000:b6c4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> ath_rate: <Atsushi Onoe's rate control algorithm> random: <entropy source, Software, Yarrow> null: <null device, zero device> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1U> on motherboard acpi0: [MPSAFE] acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0 pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: BIOS version 2.10 Found $PIR table, 14 entries at 0xc00fdeb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 A 0x69 3 4 5 6 7 9 10 11 12 14 15 slot 1 2 2 B 0x6a 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15 slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x68 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 2 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 29 func 7 acpi0: Power Button (fixed) atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 1 acpi_ec0: info: new max delay is 70 us ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link6: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link6: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link7: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 pci_link7: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.2.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 11 ACPI: Found matching pin for 0.29.INTC at func 2: 11 ACPI: Found matching pin for 0.29.INTD at func 7: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 11 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 1, range 32, base d0000000, size 19, enabled map[18]: type 4, range 32, base 00001800, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type 3, range 32, base e8000000, size 27, enabled map[14]: type 1, range 32, base d0080000, size 19, enabled found-> vendor=0x8086, dev=0x3582, revid=0x02 bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c2, revid=0x01 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c4, revid=0x01 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 00001860, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24c7, revid=0x01 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[10]: type 1, range 32, base d0100000, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x24cd, revid=0x01 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x81 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001810, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x01 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c3, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base d0100c00, size 9, enabled map[1c]: type 1, range 32, base d0100800, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c5, revid=0x01 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x01 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xd0000000 agp0: detected 8060k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0100000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <EHCI (generic) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: single transaction translator uhub3: 6 ports with 6 removable, self powered pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 2 pcib1: subordinate bus 5 pcib1: I/O decode 0x3000-0x7fff pcib1: memory decode 0xd0200000-0xdfffffff pcib1: prefetched decode 0xf0000000-0xf7ffffff pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 0.2.INTA at func 0: 11 pci2: <ACPI PCI bus> on pcib1 pci2: physical bus=2 map[10]: type 1, range 32, base b0000000, size 12, enabled pcib1: device (null) requested decoded memory range 0xb0000000-0xb0000fff pcib1: matched entry for 2.0.INTA (src \\_SB_.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1180, dev=0x0476, revid=0x8d bus=2, slot=0, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0210000, size 8, enabled pcib1: device (null) requested decoded memory range 0xd0210000-0xd02100ff pcib1: matched entry for 2.0.INTB (src \\_SB_.LNKB:0) pcib1: slot 0 INTB routed to irq 11 via \\_SB_.LNKB found-> vendor=0x1180, dev=0x0822, revid=0x13 bus=2, slot=0, func=1 class=08-05-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0220000, size 17, enabled pcib1: device (null) requested decoded memory range 0xd0220000-0xd023ffff map[18]: type 4, range 32, base 00007000, size 6, enabled pcib1: device (null) requested decoded I/O range 0x7000-0x703f pcib1: matched entry for 2.1.INTA (src \\_SB_.LNKE:0) pcib1: slot 1 INTA routed to irq 11 via \\_SB_.LNKE found-> vendor=0x8086, dev=0x1077, revid=0x00 bus=2, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0200000, size 16, enabled pcib1: device (null) requested decoded memory range 0xd0200000-0xd020ffff pcib1: matched entry for 2.2.INTA (src \\_SB_.LNKF:0) pcib1: slot 2 INTA routed to irq 11 via \\_SB_.LNKF found-> vendor=0x168c, dev=0x1014, revid=0x01 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x04761180 0x02100107 0x0607008d 0x00824000 0x10: 0xb0000000 0x020000dc 0xb0050302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010b 0x40: 0x05551014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x04800001 0x00000000 0x04630464 0x00000001 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x008a0000 0x00000000 0x00f00000 0x00000000 0xb0: 0x00000000 0x36000000 0x00003800 0x00000000 0xc0: 0x05551014 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: <base peripheral> at device 0.1 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x7000-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xd0220000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0x7000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0a:e4:2b:bc:9f em0: Speed:N/A Duplex:N/A ath0: <Atheros 5212> mem 0xd0200000-0xd020ffff irq 11 at device 2.0 on pci2 ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0200000 ath0: [MPSAFE] ath0: bad hal channel 858993443 (4920/340) ignored ath0: bad hal channel 858993447 (4940/340) ignored ath0: bad hal channel 858993451 (4960/340) ignored ath0: bad hal channel 858993455 (4980/340) ignored ath0: bpf attached ath0: Ethernet address: 00:0e:9b:6e:80:97 ath0: bpf attached ath0: bpf attached ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: mac 5.9 phy 4.3 radio 3.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: [MPSAFE] ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xd0100800-0xd01008ff,0xd0100c00-0xd0100dff irq 11 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)> pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4 pcm0: sndbuf_setmap 1eb88000, 4000; 0xdcfd6000 -> 1eb88000 pcm0: sndbuf_setmap 1eb84000, 4000; 0xdcfda000 -> 1eb84000 pci0: <simple comms> at device 31.6 (no driver attached) pci0:31:6: Transition from D0 to D3 acpi_tz0: <Thermal Zone> on acpi0 speaker0: <PC speaker> port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x54ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00002000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad Button> on acpi0 acpi_ibm0: Version 100 acpi_ibm0: Available Mask 9dc acpi_ibm0: Initial Mask 80c pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sio0 failed to probe at port 0x3f8 irq 4 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1395476624 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ipfw2 initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ad0: setting PIO4 on Intel ICH4 chip ad0: setting UDMA100 on Intel ICH4 chip ad0: 38154MB <HITACHI DK13FA-40B 00MCA0B4> at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue pcm0: measured ac97 link rate at 48009 Hz, will use 48000 Hz GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init em0: Link is up 100 Mbps Full Duplex nfslock: pseudo-device splash: image decoder found: daemon_saverReceived on Sun Feb 06 2005 - 11:44:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:27 UTC