At 10:17 AM -0700 2/7/05, M. Warner Losh wrote: >In message: <200502070810.53809.jonathan_at_fosburgh.org> > Jonathan Fosburgh <jonathan_at_fosburgh.org> writes: >: /usr/src/UPDATING doesn't seem too clear on this, and I can't >: find it in the mailing lists. What is the current procedure to >: upgrade from 5-STABLE to 6-CURRENT? > >Here's what I have in my tree, waiting to be committed. I've >simplified out all the 4.x stuff since people still running 4.x >should consider upgrading to 5.3 first. As such, I've removed >all the work arounds for an imperfect evolution of the system. > > To upgrade in-place from 5.x-stable to current > ---------------------------------------------- > <make sure you have good level 0 dumps> > make buildworld [9] > make kernel KERNCONF=YOUR_KERNEL_HERE [8] > [1] > <reboot in single user> [3] > mergemaster -p [5] I find it easier/nicer to do the 'mergemaster -p' step before rebooting into single-user mode... That's at least partially because I'm trying to keep accounts in-sync across multiple machines. On the other hand, I don't see any advantage in waiting to do that step after the reboot. > [3] From the bootblocks, boot -s, and then do > fsck -p > mount -u / > mount -a > cd src > adjkerntz -i # if CMOS is wall time > Also, when doing a major release upgrade, it is required that > you boot into single user mode to do the installworld. To me, it seemed like a good idea to put all these steps (and a few others) in a source-file under /root. That way I only have to type in one thing -- and I'm much less tempted to try short-cuts if there is only one thing to type in. What is that 'cd src' doing in there? What causes you to be in /usr at that step? I'm pretty sure that I'm in / or /root. -- Garance Alistair Drosehn = gad_at_gilead.netel.rpi.edu Senior Systems Programmer or gad_at_freebsd.org Rensselaer Polytechnic Institute or drosih_at_rpi.eduReceived on Mon Feb 07 2005 - 19:34:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:27 UTC