On Sat, 8 Jan 2005, Julian Elischer wrote: > Julian Elischer wrote: >> If so, let me know if it crashes the system, or works >> (or just does nothing :-) ) <snippage> Already ran into something interesting; this is a Netfinity 4500R. Jan 9 18:13:18 terya kernel: uhub0: device problem (SET_ADDR_FAILED), disabling port 1 Jan 9 18:13:52 terya last message repeated 6 times ohci0: <OHCI (generic) USB controller> mem 0xff700000-0xff700fff irq 11 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci0_at_pci0:15:2: class=0x0c0310 card=0x02201166 chip=0x02201166 rev=0x04 hdr=0x00 vendor = 'ServerWorks (Was: Reliance Computer Corp)' device = 'OSB4 OpenHCI Compliant USB Controller' class = serial bus subclass = USB Move it to the bottom USB port... Jan 9 18:13:56 terya kernel: ums0: Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00, addr 2, iclass 3/1 Jan 9 18:13:56 terya kernel: ums0: 5 buttons and Z dir. Jan 9 18:13:56 terya kernel: ums0: at uhub0 port 2 (addr 2) disconnected Jan 9 18:13:56 terya kernel: ums0: detached Jan 9 18:13:57 terya kernel: ums0: Kensington USB/PS2 Wheel Mouse, rev 1.10/1.00, addr 2, iclass 3/1 Jan 9 18:13:57 terya kernel: ums0: 5 buttons and Z dir. So as one can see, it's immediately detaching and reattaching, yep. It doesn't seem to detach when I just let it sit though. As far as working, yes, it works, with the exception of the thumb buttons. (Only tested console.) Detach is also OK. Jan 9 18:21:07 terya kernel: ums0: at uhub0 port 2 (addr 2) disconnected Jan 9 18:21:07 terya kernel: ums0: detached Jan 9 18:21:07 terya moused: unable to open /dev/ums0: No such file or directory -Ketrien I. Saihr-KenchedraReceived on Sun Jan 09 2005 - 22:30:10 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:25 UTC