Hand transcribed Fatal trap 12: page fault while in kernel mode fault virtual address = 0xff70ff90 fault code = supervisor read, page not present instruction pointer = 0x8:0xc0641091 stack pointer = 0x10:0xc0c20c58 frame pointer = 0x10:0xc0c20c78 code segement = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflages = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) [thread pid 52 tid 100040] Stopped at mtrash_ctor+0x63: movl 0x20(%eax),%edx db> trace mtrash_ctor(c1bc9600,200,0,1,c0c20b8) at mtrash_ctor+0x63 uma_zalloc_arg(c10456c0,0,1,c1046be0,c1979ac) at uma_zalloc_arg+0x46c malloc(200,c06f5760,1,950a,c0c20d40) at malloc+0x87 ata_getparam(10,3f,200,c1bc9800,c1979a00) at ata_getparam+0x38 ata_identify_device(c1a7f080,1,c19fc990,c197296c,c0c20d78) at ata_identify_device+0xfc ata_boot_attach(0,c0545d5f,c072c9e0,0,c06d15d7) at ata_boot_attach+0x40 run_interrupt_driven_config_hooks(0,0,c197299c,c1ec00,c1e000) at run_interrupt_driven_config_hooks+0x22 mi_startup() at mi_startup()+0xb1 Verbose dmesg from last working kernel follows .sig. -- Steve Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #5: Sun Nov 14 13:24:03 PST 2004 root_at_kargl.stms.org:/usr/obj/usr/src/sys/MOBILE WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/sgk/kernel" at 0xc086f000. Preloaded elf module "/boot/sgk/vesa.ko" at 0xc086f14c. Preloaded elf module "/boot/sgk/snd_ich.ko" at 0xc086f1f4. Preloaded elf module "/boot/sgk/sound.ko" at 0xc086f2a0. Preloaded elf module "/boot/sgk/umodem.ko" at 0xc086f348. Preloaded elf module "/boot/sgk/ucom.ko" at 0xc086f3f0. Preloaded elf module "/boot/sgk/agp.ko" at 0xc086f498. Preloaded elf module "/boot/sgk/radeon.ko" at 0xc086f540. Preloaded elf module "/boot/sgk/uplcom.ko" at 0xc086f5e8. Calibrating clock(s) ... i8254 clock: 1193139 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1994126872 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1994.13-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536748032 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x000000001f6b1fff, 514375680 bytes (125580 pages) avail memory = 516014080 (492 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xbfee pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> mem: <memory> Pentium Pro MTRR support enabled io: <I/O> VESA: information block 56 45 53 41 00 02 00 01 00 01 01 00 00 00 22 00 00 01 00 01 00 01 19 01 00 01 2f 01 00 01 34 01 00 01 82 01 0d 01 0e 01 0f 01 20 01 92 01 93 01 94 01 95 01 96 01 a2 01 a3 01 a4 01 a5 01 a6 01 VESA: 60 mode(s) found VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc0807c42 (1000022) VESA: ATI MOBILITY RADEON 7500 VESA: ATI Technologies Inc. P7 01.00 null: <null device, zero device> acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fbb90 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 8 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 12 D 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 atpic: Programming IRQ9 as level/low acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 29 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 29 func 2 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.0 \\_SB_.PCI0.LNKB irq 0: [ 5 7] 0+ low,level,sharable 0.31.1 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.31.2 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.31.3 \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.0 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.29.1 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 0.29.2 \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.2.0 \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 0: [ 5 7] 0+ low,level,sharable 0.1.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e8000000, size 26, enabled found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA) pcib0: possible interrupts: 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 2, priority 5130): interrupts: 5 7 penalty: 90 5040 \\_SB_.PCI0.LNKD (references 2, priority 2180): interrupts: 11 10 5 9 7 penalty: 80 80 90 160 5040 \\_SB_.PCI0.LNKA (references 4, priority 426): interrupts: 11 10 9 penalty: 80 80 160 \\_SB_.PCI0.LNKC (references 2, priority 213): interrupts: 11 10 9 penalty: 80 80 160 pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x2482, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 found-> vendor=0x8086, dev=0x2448, revid=0x42 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x248c, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000bfa0, size 4, enabled found-> vendor=0x8086, dev=0x248a, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 4, range 32, base 0000dc80, size 6, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB) pcib0: possible interrupts: 5 7 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 2, priority 5210): interrupts: 5 7 penalty: 130 5080 \\_SB_.PCI0.LNKD (references 2, priority 2356): interrupts: 5 10 11 9 7 penalty: 130 160 200 320 5080 \\_SB_.PCI0.LNKC (references 2, priority 453): interrupts: 10 11 9 penalty: 160 200 320 atpic: Programming IRQ5 as level/low pcib0: slot 31 INTB routed to irq 5 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x2485, revid=0x02 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000dc00, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB) pcib0: slot 31 INTB is already routed to irq 5 found-> vendor=0x8086, dev=0x2486, revid=0x02 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xe0000000-0xe7ffffff ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq*11: [ 9 10 11] 11+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff map[14]: type 4, range 32, base 0000c000, size 8, enabled pcib1: device (null) requested decoded I/O range 0xc000-0xc0ff map[18]: type 1, range 32, base fcff0000, size 16, enabled pcib1: device (null) requested decoded memory range 0xfcff0000-0xfcffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA) pcib1: slot 0 INTA is already routed to irq 11 found-> vendor=0x1002, dev=0x4c57, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x01a7, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 drm0: <ATI Radeon LW Mobility 7500 M7> port 0xc000-0xc0ff mem 0xfcff0000-0xfcffffff,0xe0000000-0xe7ffffff irq 11 at device 0.0 on pci1 info: [drm] AGP at 0xe8000000 64MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 16 pcib2: I/O decode 0xe000-0xffff pcib2: memory decode 0xf4000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. ACPI PCI link initial configuration: \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 2.1.0 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 2.1.1 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 2.1.2 \\_SB_.PCI0.LNKB irq* 5: [ 5 7] 0+ low,level,sharable 2.3.0 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 2.3.1 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 2.0.0 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 11+ low,level,sharable 2.8.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000ec80, size 7, enabled pcib2: device (null) requested decoded I/O range 0xec80-0xecff map[14]: type 1, range 32, base f8fffc00, size 7, enabled pcib2: device (null) requested decoded memory range 0xf8fffc00-0xf8fffc7f pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC) pcib2: possible interrupts: 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKD (references 6, priority 7764): interrupts: 5 10 11 9 7 penalty: 250 280 320 440 5180 \\_SB_.PCI0.LNKC (references 4, priority 1386): interrupts: 10 11 9 penalty: 280 320 440 pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=2, slot=1, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf8fffc00 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:08:74:99:7c:c5 xl0: [MPSAFE] cbb0: <TI1420 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xf4000000-0xfbffffff cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD) pcib2: possible interrupts: 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKD (references 6, priority 8484): interrupts: 5 10 11 9 7 penalty: 350 400 480 560 5280 pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x012b1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1420 PCI-CardBus Bridge> at device 1.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xf4000000-0xfbffffff cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf4001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD) pcib2: slot 1 INTA is already routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0xf4001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x012b1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000017 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 5 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xdc80 pcm0: [GIANT-LOCKED] pcm0: <Cirrus Logic CS4205 AC97 Codec (id = 0x4352595b)> pcm0: Codec features mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, 5 bit master volume, SRS 3D Stereo Enhancement pcm0: Primary codec extended features variable rate PCM, variable rate mic, AMAP pcm0: sndbuf_setmap 1f423000, 4000; 0xd9489000 -> 1f423000 pcm0: sndbuf_setmap 1f41f000, 4000; 0xd948d000 -> 1f41f000 pcm0: sndbuf_setmap 1f41b000, 4000; 0xd9491000 -> 1f41b000 pci0: <simple comms> at device 31.6 (no driver attached) pci0:31:6: Transition from D0 to D3 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x1 0x11 0x1 0x1 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <8 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 1994126872 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel ICH3 chip ata0-master: setting UDMA100 on Intel ICH3 chip ad0: <IC25N040ATCS05-0/CS4OA63A> ATA-5 disk at ata0-master ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: resetting done .. ata1: reiniting channel .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1: reiniting channel .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel ICH3 chip ata1: device config done .. ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel ICH3 chip acd0: <HL-DT-STDVD-ROM GDR8081N/0108> DVDROM drive at ata1 as master acd0: read 1722KB/s (4134KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48007 Hz, will use 48000 Hz Mounting root from ufs:/dev/ad0s3a start_init: trying /sbin/init splash: image decoder found: blank_saver Linux ELF exec handler installed acpi_cmbat1: battery initialization failed, giving upReceived on Mon Jan 10 2005 - 20:21:59 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:26 UTC