Hello, recently I have added a cheap SIL3112 SATA controller in my system. Unfortunately when I do attach my Maxtor SATA disk to this controller I do only get DMA errors. This is all on a recent 6.0-CURRENT system and can be reproduced with a GENERIC kernel. I have tried with and without ACPI while still getting the same results. Attached to this mail is the output of a "boot -v" of this system. Anything I could do to track this further down? Thank you for your help Michael ------------------------------------------------------------------------- michael class E-Mail: michael.class_at_gmx.de ------------------------------------------------------------------------- Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #0: Sat Jan 8 22:23:09 MET 2005 root_at_sv-micha.mc.hp.com:/usr/src/sys/i386/compile/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel.GENERIC/kernel" at 0xc0a88000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a881a0. Calibrating clock(s) ... i8254 clock: 1193228 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 996551298 Hz CPU: Intel Pentium III (996.55-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000003edbffff, 1041858560 bytes (254360 pages) avail memory = 1041924096 (993 MB) MP Configuration Table version 1.1 found at 0xc00f59a0 Table 'FACP' at 0x3fff0030 Table 'APIC' at 0x3fff00b0 MADT: Found table at 0x3fff00b0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: <AMIINT > APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fdad0 bios32: Entry = 0xfdae0 (c00fdae0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb01 pnpbios: Found PnP BIOS data at 0xc00f6e40 pnpbios: Entry = f0000:5c04 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high MADT: intr override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 <Version 1.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00040011 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x00010000 therm: 0x00000000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AMIINT VIA_694X> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06911106) pcibios: BIOS version 2.10 Found $PIR table, 8 entries at 0xc00f7530 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 7 A 0xfe 14 embedded 0 7 B 0xff 15 embedded 0 7 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 7 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 1 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 B 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 2 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 A 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 3 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 4 0 12 D 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 C 0x05 3 4 5 7 9 10 11 12 14 15 slot 5 0 13 D 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 14 A 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 14 B 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 14 C 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 14 D 0x02 3 4 5 7 9 10 11 12 14 15 AcpiOsDerivePciId: bus 0 dev 7 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci_link0: <ACPI PCI Link LNKC> irq 10 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 10 N 0 3 4 5 6 7 10 11 12 14 15 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: <ACPI PCI Link LNKD> irq 9 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 9 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 26, enabled found-> vendor=0x1106, dev=0x0691, revid=0xc4 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x8598, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x0686, revid=0x40 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=7, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c400, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD:0) pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x1a bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000c800, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD:0) pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD found-> vendor=0x1106, dev=0x3038, revid=0x1a bus=0, slot=7, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0x3057, revid=0x40 bus=0, slot=7, func=4 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 4, range 32, base 0000d000, size 2, enabled map[18]: type 4, range 32, base 0000cc00, size 2, enabled pcib0: matched entry for 0.7.INTC (src \\_SB_.LNKC:0) ioapic0: Changing trigger for pin 10 to level ioapic0: Changing polarity for pin 10 to low pcib0: slot 7 INTC routed to irq 10 via \\_SB_.LNKC found-> vendor=0x1106, dev=0x3058, revid=0x50 bus=0, slot=7, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dffc0000, size 17, enabled map[14]: type 1, range 32, base dffa0000, size 17, enabled map[18]: type 4, range 32, base 0000c000, size 6, enabled pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 17 found-> vendor=0x8086, dev=0x1076, revid=0x00 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base dfffff00, size 8, enabled pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 18 found-> vendor=0x1000, dev=0x0001, revid=0x01 bus=0, slot=10, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 map[10]: type 3, range 32, base d8000000, size 26, enabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 19 found-> vendor=0x4444, dev=0x0803, revid=0x01 bus=0, slot=11, func=0 class=04-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=19 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base dfffd000, size 12, enabled pcib0: matched entry for 0.12.INTA pcib0: slot 12 INTA hardwired to IRQ 16 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dfffe000, size 12, enabled pcib0: matched entry for 0.12.INTB pcib0: slot 12 INTB hardwired to IRQ 17 found-> vendor=0x1033, dev=0x0035, revid=0x41 bus=0, slot=12, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dffffe00, size 8, enabled pcib0: matched entry for 0.12.INTC pcib0: slot 12 INTC hardwired to IRQ 18 found-> vendor=0x1033, dev=0x00e0, revid=0x02 bus=0, slot=12, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000bc00, size 3, enabled map[14]: type 4, range 32, base 0000b800, size 2, enabled map[18]: type 4, range 32, base 0000b400, size 3, enabled map[1c]: type 4, range 32, base 0000b000, size 2, enabled map[20]: type 4, range 32, base 0000ac00, size 4, enabled map[24]: type 1, range 32, base dffffc00, size 9, enabled pcib0: matched entry for 0.13.INTA pcib0: slot 13 INTA hardwired to IRQ 17 found-> vendor=0x1095, dev=0x3112, revid=0x02 bus=0, slot=13, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=17 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x5000-0x6fff pcib1: memory decode 0xdfd00000-0xdfdfffff pcib1: prefetched decode 0xb7b00000-0xd7bfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base c8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xc8000000-0xcfffffff map[14]: type 4, range 32, base 00006800, size 8, enabled pcib1: device (null) requested decoded I/O range 0x6800-0x68ff map[18]: type 1, range 32, base dfdf0000, size 16, enabled pcib1: device (null) requested decoded memory range 0xdfdf0000-0xdfdfffff pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 pcib1: slot 0 INTA is routed to irq 16 found-> vendor=0x1002, dev=0x5961, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=16 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base c0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xc0000000-0xc7ffffff map[14]: type 1, range 32, base dfde0000, size 16, enabled pcib1: device (null) requested decoded memory range 0xdfde0000-0xdfdeffff found-> vendor=0x1002, dev=0x5941, revid=0x01 bus=1, slot=0, func=1 class=03-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 9 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400 uhci0: [GIANT-LOCKED] usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ulpt0: Hewlett-Packard DeskJet 990C, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 9 at device 7.3 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800 uhci1: [GIANT-LOCKED] usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 7.4 (no driver attached) pci0:7:4: Transition from D0 to D3 pci0: <multimedia, audio> at device 7.5 (no driver attached) pci0:7:5: Transition from D0 to D3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0xc000-0xc03f mem 0xdffa0000-0xdffbffff,0xdffc0000-0xdffdffff irq 17 at device 9.0 on pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdffc0000 em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xc000 em0: [MPSAFE] em0: bpf attached em0: Ethernet address: 00:0e:0c:2e:81:1c em0: Speed:N/A Duplex:N/A sym0: <810> port 0xd800-0xd8ff mem 0xdfffff00-0xdfffffff irq 18 at device 10.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xdfffff00 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: [GIANT-LOCKED] pci0: <multimedia, video> at device 11.0 (no driver attached) pci0:11:0: Transition from D0 to D3 ohci0: <NEC uPD 9210 USB controller> mem 0xdfffd000-0xdfffdfff irq 16 at device 12.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffd000 ohci0: [GIANT-LOCKED] usb2: OHCI version 1.0 usb2: <NEC uPD 9210 USB controller> on ohci0 usb2: USB revision 1.0 uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 1 port with 1 removable, self powered ohci1: <NEC uPD 9210 USB controller> mem 0xdfffe000-0xdfffefff irq 17 at device 12.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdfffe000 ohci1: [GIANT-LOCKED] usb3: OHCI version 1.0 usb3: <NEC uPD 9210 USB controller> on ohci1 usb3: USB revision 1.0 uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 1 port with 1 removable, self powered pci0: <serial bus, USB> at device 12.2 (no driver attached) pci0:12:2: Transition from D0 to D3 atapci1: <SiI 3112 SATA150 controller> port 0xac00-0xac0f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xbc00-0xbc07 mem 0xdffffc00-0xdffffdff irq 17 at device 13.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xac00 atapci1: [MPSAFE] atapci1: Reserved 0x200 bytes for rid 0x24 type 3 at 0xdffffc00 ata2: channel #0 on atapci1 ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: channel #1 on atapci1 ata3: reset tp1 mask=01 ostat0=7f ostat1=00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3-master: stat=0xff err=0x00 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=ff stat1=00 devices=0x0 ata3: [MPSAFE] pci_link2: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 10 11 12 14 15 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model MouseMan+, device ID 0-38, 3 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:08, syncbits:00 fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0xc001 0xc011 0xc001 0xc001 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: irq maps: 0xc001 0xc009 0xc001 0xc001 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xd0800-0xd4fff,0xcd000-0xd07ff,0xc0000-0xccfff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 996551298 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 82C686B chip ata0-master: setting UDMA100 on VIA 82C686B chip ata0-slave: setting PIO4 on VIA 82C686B chip ata0-slave: setting UDMA100 on VIA 82C686B chip ad0: <IC35L180AVV207-1/V26OA60F> ATA-6 disk at ata0-master ad0: 176700MB (361882080 sectors), 359010 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ad1: <IBM-DTLA-307045/TX6OA60A> ATA-5 disk at ata0-slave ad1: 43979MB (90069840 sectors), 89355 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=80pin ata1-master: setting PIO4 on VIA 82C686B chip ata1-master: setting UDMA33 on VIA 82C686B chip acd0: <SONY DVD RW DRU-500A/2.0h> DVDR drive at ata1 as master acd0: read 5512KB/s (5512KB/s) write 4134KB/s (4134KB/s), 8192KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, DVDR, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc em0: Link is up 1000 Mbps Full Duplex ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ad4: <Maxtor 6Y160M0/YAR51BW0> ATA-7 disk at ata2-master ad4: 156334MB (320173056 sectors), 317632 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, SATA150 ar: LSI check1 failed Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. GEOM: new disk ad0 GEOM: new disk ad1 GEOM: new disk ad4 ad4: TIMEOUT - READ_DMA retrying (2 retries left) LBA=0 ata2: reiniting channel .. (probe3:sym0:0:3:0): error 22 (probe3:sym0:0:3:0): Unretryable Error pass0 at sym0 bus 0 target 3 lun 0 pass0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device pass0: 10.000MB/s transfers (10.000MHz, offset 8) SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00040011 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x00010000 therm: 0x00000000 err: 0x00010000 pcm: 0x00010000 ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error cd0 at sym0 bus 0 target 3 lun 0 cd0: <PIONEER DVD-ROM DVD-304F 1.03> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ad4: TIMEOUT - READ_DMA retrying (1 retry left) LBA=0 ata2: reiniting channel .. ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ata2: reiniting channel .. ata2: reset tp1 mask=01 ostat0=50 ostat1=00 ad4: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: resetting done .. ad4: pio=0x0c wdma=0x22 udma=0x46 cable=40pin ata2: device config done .. ad4: FAILURE - READ_DMA timed out ad4: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0 GEOM: new disk cd0 (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error Trying to mount root from ufs:/dev/ad1s1a start_init: trying /sbin/init (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable Error GEOM_VINUM: subdisk space.p0.s1 is up GEOM_VINUM: subdisk space.p0.s0 is up (cd0:sym0:0:3:0): error 6 (cd0:sym0:0:3:0): Unretryable ErrorReceived on Wed Jan 12 2005 - 17:13:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:26 UTC