Hi. Current frshly built kernel paniced: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-CURRENT #1: Wed Jan 19 20:38:38 MSK 2005 mcsi_at_ultra.domain:/usr/obj/usr/src/sys/ULTRA WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 536674304 (511 MB) avail memory = 514953216 (491 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <A M I OEMRSDT> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0 acpi_ec0: can't allocate data port device_attach: acpi_ec0 attach returned 6 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 cpu1: <ACPI CPU (2 Cx states)> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: Alcor Micro product 0x3002, rev 1.10/1.00, addr 3, iclass 3/1 kbd1 at ukbd0 uhid0: Alcor Micro product 0x3002, rev 1.10/1.00, addr 3, iclass 3/1 uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 ...skipping... e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto cbb0: <RF5C476 PCI-CardBus Bridge> irq 16 at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> irq 17 at device 1.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xfeafb000-0xfeafb7ff irq 18 at device 1.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:18:f3:bc fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:18:f3:bc fwe0: Ethernet address: 02:e0:18:18:f3:bc fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <base peripheral> at device 1.3 (no driver attached) pci2: <base peripheral> at device 1.4 (no driver attached) ndis0: <ASUS 802.11g Network Adapter> mem 0xfeaf8000-0xfeaf9fff irq 17 at device 2.0 on pci2 ndis0: NDIS API version: 5.0 ndis0: Ethernet address: 00:0e:a6:c2:00:e4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pcm0: <Intel ICH5 (82801EB)> port 0xd000-0xd03f,0xd400-0xd4ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Avance Logic ALC650 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button1: <Power Button> on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 5 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 device_attach: fdc0 attach returned 6 ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 device_attach: fdc0 attach returned 6 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x19 fault code = supervisor read, page not present instruction pointer = 0x8:0xc065cf4d stack pointer = 0x10:0xc0c20c34 frame pointer = 0x10:0xc0c20c40 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 0 (swapper) sysctl_find_oidname+0x15: pushl 0x18 sysctl_add_oid acpi_wake_sysctl_walk acpi_attach ... -- Maxim MaximovReceived on Wed Jan 19 2005 - 17:57:34 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:26 UTC