Re: WPA with ath

I'm trying to connect to a Linksys WRT54G. I have tested the card on
the computer when booting up in XP and it connects fine via WPA. I
also tested the card in CURRENT with WPA disabled and the card
connected fine.

> What's the AP?  Try running wpa_supplicant with a -d option to get more
> debug info (though it's not clear there'll be anything useful to see).
>
>         Sam
>

Below is some output from -d (I can provide more if needed):

=============================
Initializing interface 'ath0' conf
'/usr/local/etc/wpa_supplicant.conf' driver 'default'
Configuration file '/usr/local/etc/wpa_supplicant.conf' ->
'/usr/local/etc/wpa_supplicant.conf'
Reading configuration file '/usr/local/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 5
   id=0 ssid='1024'
Initializing interface (2) 'ath0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:09:5b:c8:22:55
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (1 BSSes)
Scan results: 1
Selecting BSS from priority group 5
0: 00:0c:41:f3:bd:a2 ssid='1024' wpa_ie_len=24 rsn_ie_len=0
   selected
Trying to associate with 00:0c:41:f3:bd:a2 (SSID='1024' freq=2437 MHz)
Cancelling scan request
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Own WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
wpa_driver_bsd_associate
Setting authentication timeout: 5 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0c:41:f3:bd:a2
No keys have been configured - skip key clearing
Associated with 00:0c:41:f3:bd:a2
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0c:41:f3:bd:a2
Setting authentication timeout: 10 sec 0 usec
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=95
  EAPOL-Key type=254
WPA: RX message 1 of 4-Way Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Renewed SNonce - hexdump(len=32): d8 2d 91 f5 90 5b 9c 0d ca 85
a4 97 97 a7 ae e8 07 01 69 28 f4 2c e3 9d 5d 6e 65 47 db 51 79 01
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: EAPOL-Key MIC - hexdump(len=16): 42 04 40 a5 9d 57 01 20 ce d4 11
d5 4d 14 56 aa
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=119
  EAPOL-Key type=254
WPA: RX message 3 of 4-Way Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 key_len=32
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Key negotiation completed with 00:0c:41:f3:bd:a2 [PTK=TKIP GTK=TKIP]
Cancelling authentication timeout
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
Setting scan request: 0 sec 100000 usec
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Disconnect event - remove keys
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_del_key: keyidx=0
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0c:41:f3:bd:a2
No keys have been configured - skip key clearing
Associated with 00:0c:41:f3:bd:a2
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
WPA: drop TX EAPOL in non-IEEE 802.1X mode (type=1 len=0)
EAPOL: SUPP_BE entering state IDLE
EAP: EAP entering state INITIALIZE
EAP: EAP entering state IDLE
Setting authentication timeout: 10 sec 0 usec
RX EAPOL from 00:0c:41:f3:bd:a2
Setting authentication timeout: 10 sec 0 usec
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=95
  EAPOL-Key type=254
WPA: RX message 1 of 4-Way Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: WPA IE for msg 2/4 - hexdump(len=24): dd 16 00 50 f2 01 01 00 00
50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Renewed SNonce - hexdump(len=32): a8 fd 94 f8 09 5b cf b6 da b5
97 b2 7f 5d 87 d8 29 b5 1f 0c b9 2c 53 4e bf ad 84 9f bd 2f 71 1c
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=64): [REMOVED]
WPA: EAPOL-Key MIC - hexdump(len=16): 3b d6 c6 20 7a 54 5b 84 89 93 50
df 46 8d 04 d6
WPA: Sending EAPOL-Key 2/4
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=119
  EAPOL-Key type=254
WPA: RX message 3 of 4-Way Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: IE KeyData - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02
01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: Sending EAPOL-Key 4/4
WPA: Installing PTK to the driver.
WPA: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6 key_len=32
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Key negotiation completed with 00:0c:41:f3:bd:a2 [PTK=TKIP GTK=TKIP]
Cancelling authentication timeout
EAPOL: External notification - portValid=1
EAPOL: External notification - EAP success=1
EAPOL: SUPP_PAE entering state AUTHENTICATING
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state IDLE
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
RX EAPOL from 00:0c:41:f3:bd:a2
EAPOL: Ignoring WPA EAPOL-Key frame in EAPOL state machines
IEEE 802.1X RX: version=1 type=3 length=127
  EAPOL-Key type=254
WPA: RX message 1 of Group Key Handshake from 00:0c:41:f3:bd:a2 (ver=1)
WPA: Group Key - hexdump(len=32): [REMOVED]
WPA: Installing GTK to the driver (keyidx=2 tx=0).
WPA: RSC - hexdump(len=6): a0 01 00 00 00 00
wpa_driver_bsd_set_key: alg=TKIP key_idx=2 set_tx=0 seq_len=6 key_len=32
WPA: Sending EAPOL-Key 2/2
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
Setting scan request: 0 sec 100000 usec
EAPOL: External notification - portEnabled=0
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
Disconnect event - remove keys
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_del_key: keyidx=0
Association event - clear replay counter
Associated to a new BSS: BSSID=00:0c:41:f3:bd:a2
No keys have been configured - skip key clearing
Associated with 00:0c:41:f3:bd:a2
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: External notification - portEnabled=1
EAPOL: SUPP_PAE entering state CONNECTING
EAPOL: txStart
======================

Thanks for your help.


Bryan