Re: ath client loose connection to ath hostap

From: Tai-hwa Liang <avatar_at_mmlab.cse.yzu.edu.tw>
Date: Wed, 6 Jul 2005 09:40:36 +0800 (CST)
On Tue, 5 Jul 2005, Sam Leffler wrote:
> Johann Hugo wrote:
>> Hi 
>> I have 2x soekris 4501 units with atheros adapters,  1=hostap mode, 
>> 1=client.
>> With a continues ping, everything keeps running (16+ hours), but after an 
>> inactive period they lose connectivity. The client still reports it is 
>> associated, but there is no IP connectivity. After "ath down" + "ath up" it 
>> does not want to associated with hostap any more. After client reboot it 
>> works fine again. After inactive period - same problem.
>
> I believe Tai-hwa Liang has a fix for this pending re approval.  You're 
> seeing beacon misses on the client but when the client scans to reassociate 
> it bogusly creates a new entry in the scan cache and things get confused.  If 
> his commit doesn't fix your problem check on the ap side to see if there are 
> auth+associate requests coming in when you get a beacon miss on the client.

   Just committed to sys/net80211/ieee80211_input.c:1.56.  Please cvsup later.

Thanks,
Tai-hwa Liang
Received on Tue Jul 05 2005 - 23:40:40 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:38 UTC