Problem with si card

Hello, 

 

I have a Specialix (now Perle) SI isa bus card. I use this with modems in a 
RAS server. Everything was fine until I upgraded the os from 5.3 to 
 -current. 

Currently I could use only 1 port (4.) on the card. I can't open another 
port with kermit, or getty, too. 

 

This machine is an Intel  SE440BX-2 motherboard, PII 400 Celeron processor, 
256 MB RAM The SI card memory address space is reserved for isa devices in 
the BIOS. 

 

Configuration: 

 

/boot/device.hints 

 

hint.si.0.at="isa" 

hint.si.0.maddr="0xd0000" 

hint.si.0.irq="12" 

 

/etc/gettytab 

 

default:\ 

       :pp=/etc/ppp/ppplogin:\ 

       :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\ 

       :if=/etc/issue: 

 

m|Metallo:\ 

       :np:hw:sp#57600: 

 

/etc/ttys 

 

ttyA01  "/usr/libexec/getty m"  dialup on insecure 

ttyA02  "/usr/libexec/getty m"  dialup on insecure 

ttyA03  "/usr/libexec/getty m"  dialup on insecure 

ttyA04  "/usr/libexec/getty m"  dialup on insecure 

 

uname 

6.0-CURRENT FreeBSD 6.0-CURRENT #0: Thu Jul  7 16:58:15 CEST 2005 

 

dmesg 

si0 at iomem 0xd0000-0xd7fff irq 12 on isa0 

si0: [GIANT-LOCKED] 

si0: card: SIHOST2, ports: 8, modules: 1, type: 1 (SI) 

 

 

Best regards, 

Geza