At 02:09 PM 13/07/2005, John Baldwin wrote: >On Wednesday 13 July 2005 09:38 am, Mike Tancsa wrote: > > At 04:28 PM 12/07/2005, John Baldwin wrote: > > >That does sort of help. Can you try commenting out the call to > > >ioapic_setup_mixed_mode() in the sys/i386/i386/mptable.c file and try > > > booting with ACPI disabled (but APIC on) and see if it still works ok? > > > > Yup, > > Still boots just fine. > >Ok. Back on 6, can you try editing sys/i386/i386/io_apic.c and in the >function ioapic_set_extint(), change the line that reads: > > io->io_pins[pin].io_masked = 1; > >to set the masked variable to 0 instead? Yes, it works with and without ACPI!! OK unload OK load /boot/kernel/kernel6 /boot/kernel/kernel6 text=0x2d7e4c data=0x32e00+0x33140 syms=[0x4+0x405e0+0x4+0x50a8b] OK set hint.acpi.0.disabled=1 OK boot KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #0: Thu Jul 21 10:43:52 EDT 2005 mdtancsa_at_shale1.sentex.ca:/usr/src/sys/i386/compile/test Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x672 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147475456 (2047 MB) avail memory = 2100953088 (2003 MB) MPTable: <DELL PowerEdge 83> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 0 cpu2 (AP): APIC ID: 1 cpu3 (AP): APIC ID: 2 ioapic0: Changing APIC ID to 4 ioapic0: Assuming intbase of 0 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard cpu1 on motherboard cpu2 on motherboard cpu3 on motherboard pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 2.1 (no driver attached) pci0: <serial bus, USB> at device 2.2 (no driver attached) piix0: <PIIX Timecounter> port 0x850-0x85f irq 9 at device 2.3 on pci0 Timecounter "PIIX" frequency 3579545 Hz quality 0 pci0: <display, VGA> at device 4.0 (no driver attached) pcib1: <PCI-PCI bridge> at device 8.0 on pci0 pci1: <PCI bus> on pcib1 amr0: <LSILogic MegaRAID 1.51> mem 0xfe000000-0xfe3fffff irq 14 at device 8.1 on pci0 amr0: <Series 466> Firmware GH6D, BIOS 1.43, 32MB RAM pcib2: <MPTable Host-PCI bridge> pcibus 2 on motherboard pci2: <PCI bus> on pcib2 pcib3: <MPTable Host-PCI bridge> pcibus 3 on motherboard pci3: <PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xfcc0-0xfcff mem 0xfeb20000-0xfeb3ffff,0xfeb00000-0xfeb1ffff irq3 em0: Ethernet address: 00:0e:0c:5d:f8:ca em0: Speed:N/A Duplex:N/A pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0c02> can't assign resources (memory) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0303> can't assign resources (port) Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entryt amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 34732MB (71131136 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Trying to mount root from ufs:/dev/amrd0s1a Pre-seeding PRNG: kickstart. sysctl: unknown oid 'kern.bootp_cookie' Interface IP-Address Broadcast Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart. swapon: adding /dev/amrd0s1b as swap device Starting file system checks: /dev/amrd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1a: clean, 216177 free (641 frags, 26942 blocks, 0.3% fragmentation) /dev/amrd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1e: clean, 506479 free (47 frags, 63304 blocks, 0.0% fragmentation) /dev/amrd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1f: clean, 11181111 free (38615 frags, 1392812 blocks, 0.3% fragmentation) /dev/amrd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1d: clean, 2528737 free (377 frags, 316045 blocks, 0.0% fragmentation) Setting hostname: hippo.sentex.ca. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 Starting dhclient. em0: link state changed to UP em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:0e:0c:5d:f8:ca media: Ethernet autoselect status: no carrier Additional routing options: IP gateway=YES. Starting devd. Mounting NFS file systems:. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Recovering vi editor sessions:. Starting local daemons:. Updating motd. Configuring syscons: blanktime. Starting sshd. Initial i386 initialization:. Additional ABI support:. Starting cron. Local package initialization:. Additional TCP options:. Thu Jul 21 11:14:12 EDT 2005 FreeBSD/i386 (hippo.sentex.ca) (ttyd0) login: OK load /boot/kernel/kernel6 /boot/kernel/kernel6 text=0x2d7e4c data=0x32e00+0x33140 syms=[0x4+0x405e0+0x4+0x50a8b] OK load /boot/kernel/acpi.ko /boot/kernel/acpi.ko text=0x40b30 data=0x20e0+0x10b0 syms=[0x4+0x76b0+0x4+0x9e56] OK boot KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #0: Thu Jul 21 10:43:52 EDT 2005 mdtancsa_at_shale1.sentex.ca:/usr/src/sys/i386/compile/test ACPI APIC Table: <DELL PE6350 > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x672 Stepping = 2 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 2147475456 (2047 MB) avail memory = 2096738304 (1999 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 3 cpu1 (AP): APIC ID: 0 cpu2 (AP): APIC ID: 1 cpu3 (AP): APIC ID: 2 ioapic0: Changing APIC ID to 4 ioapic0 <Version 1.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE6350> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNK0> on acpi0 pci_link1: <ACPI PCI Link LNK1> on acpi0 pci_link2: <ACPI PCI Link LNK2> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNK3> on acpi0 pci_link4: <ACPI PCI Link LNK4> on acpi0 pci_link5: <ACPI PCI Link LNK5> on acpi0 pci_link6: <ACPI PCI Link LNK6> on acpi0 pci_link7: <ACPI PCI Link LNK7> on acpi0 pci_link8: <ACPI PCI Link LNK8> irq 14 on acpi0 pci_link9: <ACPI PCI Link LNK9> on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 2.1 (no driver attached) pci0: <serial bus, USB> at device 2.2 (no driver attached) intpm0: <Intel 82371AB Power management controller> port 0x850-0x85f irq 9 at device 2.3 on pci0 intpm0: I/O mapped 850 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus1: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus1 intpm0: PM I/O mapped 800 pci0: <display, VGA> at device 4.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci1: <ACPI PCI bus> on pcib1 amr0: <LSILogic MegaRAID 1.51> mem 0xfe000000-0xfe3fffff irq 14 at device 8.1 on pci0 amr0: <Series 466> Firmware GH6D, BIOS 1.43, 32MB RAM pcib2: <ACPI Host-PCI bridge> on acpi0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI Host-PCI bridge> on acpi0 pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xfcc0-0xfcff mem 0xfeb20000-0xfeb3ffff,0xfeb00000-0xfeb1ffff irq3 em0: Ethernet address: 00:0e:0c:5d:f8:ca em0: Speed:N/A Duplex:N/A fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entryt amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 34732MB (71131136 sectors) RAID 5 (optimal) ses0 at amr0 bus 0 target 6 lun 0 ses0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/amrd0s1a Pre-seeding PRNG: kickstart. sysctl: unknown oid 'kern.bootp_cookie' Interface IP-Address Broadcast Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart. swapon: adding /dev/amrd0s1b as swap device Starting file system checks: /dev/amrd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1a: clean, 216177 free (641 frags, 26942 blocks, 0.3% fragmentation) /dev/amrd0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1e: clean, 506479 free (47 frags, 63304 blocks, 0.0% fragmentation) /dev/amrd0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1f: clean, 11181111 free (38615 frags, 1392812 blocks, 0.3% fragmentation) /dev/amrd0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/amrd0s1d: clean, 2528725 free (381 frags, 316043 blocks, 0.0% fragmentation) Setting hostname: hippo.sentex.ca. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 Starting dhclient. em0: link state changed to UP em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 192.168.5.107 netmask 0xffffff00 broadcast 192.168.5.255 ether 00:0e:0c:5d:f8:ca media: Ethernet autoselect status: no carrier Additional routing options: IP gateway=YES. Starting devd. Mounting NFS file systems:. Starting syslogd. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Recovering vi editor sessions:. Starting local daemons:. Updating motd. Configuring syscons: blanktime. Starting sshd. Initial i386 initialization:. Additional ABI support:. Starting cron. Local package initialization:. Additional TCP options:. Thu Jul 21 11:37:20 EDT 2005 FreeBSD/i386 (hippo.sentex.ca) (ttyd0)Received on Thu Jul 21 2005 - 13:40:41 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:39 UTC