CD-RW not recognized at boot

From: Patrick Bowen <pbowen_at_fastmail.fm>
Date: Sat, 23 Jul 2005 11:40:16 -0500
Dear list;

Upgrading from 5.4 to 6.0BETA1 , I get the following on boot. The kernel 
is not recognizing my CD-RW.

ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master UDMA33
unknown: timeout waiting for read DRQunknown: timeout waiting for read 
DRQATA PseudoRAID loaded

Comparable boot msg from 5.4 is;

ad0: 19077MB <FUJITSU MHS2020AT E/8307> [38760/16/63] at ata0-master UDMA33
acd0: DVDROM <LG DVD-ROM DRN-8080B/1.09> at ata1-master PIO4

The machine is a Dell latitude C600. I also have a  DVD which *is*  
recognized.  Is support for this particular CD-RW lost in the mists of 
time, or is there something I can check for? /boot/device.hints has the 
correct hints for this drive when compared to the 5.4 hints. Dmesg attached.

Any assistance appreciated.

Patrick Bowen



Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Fri Jul 22 18:50:32 CDT 2005
    pbowen_at_sg1.sgc.org:/usr/obj/usr/src/sys/LAPTOP-MINIMAL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (601.37-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536719360 (511 MB)
avail memory = 515534848 (491 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: failed: rid 0x10 is ioport, requested 3
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffd800-0xf3ffd87f,0xf3ffdc00-0xf3ffdc7f irq 11 at device 16.0 on pci0
miibus0: <MII bus> on xl0
tdkphy0: <TDK 78Q2120 media interface> on miibus0
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:48:c7:b2
pci0: <simple comms> at device 16.1 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 601366134 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 19077MB <FUJITSU MHS2020AT E/8307> [38760/16/63] at ata0-master UDMA33
acd0: DVDROM <LG DVD-ROM DRN-8080B/1.09> at ata1-master PIO4
wi0: <SMC SMC2532W-B EliteConnect Wireless Adapter> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9)
wi0: Ethernet address: 00:04:e2:80:34:be
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
cd0 at ata1 bus 0 target 0 lun 0
cd0: <LG DVD-ROM DRN8080B 1.09> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
Received on Sat Jul 23 2005 - 14:40:44 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:39 UTC