On Wednesday 15 June 2005 12:59 pm, Katu wrote: > > I have an old HP Kayak XU (dual PII 300 MHz) that was happily running > > Windows NT 4, then Linux with 2.4 kernel, then FreeBSD 5.2.1. Today I > > tried to install 6-CURRENT snapshot from June, and during boot it > > repeats the same error messages regarding ahc0 over and over. Please > > see attached verbose boot log. > > > > What is the problem? Is it a hardware issue or something else? I still > > have the machine connected to serial console if you need more > > information. > > > > Thanks, > > > > Arthur > > I just tried with 5.4-RELEASE, it didn't work too, so I guess > something changed between 5.2.1 and 5.3. Attached is the boot log from > 6.0 snapshot All the IRQs are the same, so I don't think it is an interrupt routing issue. The ahc(4) driver did upload different firmware into the cards though, so perhaps there's a bug in the new firmware? You can try asking about that on the scsi_at_ list. -- John Baldwin <jhb_at_FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.orgReceived on Tue Jun 28 2005 - 16:14:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:37 UTC