Hi folks, (especially sos ;-) One more patch for ThinkPad T43. -current probes as atapci0: <GENERIC ATA controller> port 0x18c0-0x18cf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 <..snip..> ad0: 76319MB <FUJITSU MHT2080AH/8471> [155061/16/63] at ata0-master UDMA33 acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.03> at ata1-master UDMA33 pciconf reports as atapci0_at_pci0:31:2: class=0x010180 card=0x056a1014 chip=0x26538086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' device = '82801FBM ICH6M SATA Controller' class = mass storage subclass = ATA (but I think it is not SATA controller.) The disk ad0 supports UDMA100(and atapci0 too, maybe), but it falls down to UDMA33. It needs new device-id entry in ata-chipset. Thanks, diff -u sys.orig/dev/ata/ata-chipset.c sys/dev/ata/ata-chipset.c --- sys.orig/dev/ata/ata-chipset.c Sun Jan 2 04:24:25 2005 +++ sys/dev/ata/ata-chipset.c Sat Mar 12 14:16:21 2005 _at__at_ -836,6 +836,7 _at__at_ { ATA_I6300ESB_S1,0, 0, 0x00, ATA_SA150, "Intel 6300ESB" }, { ATA_I6300ESB_R1,0, 0, 0x00, ATA_SA150, "Intel 6300ESB" }, { ATA_I82801FB, 0, 0, 0x00, ATA_UDMA5, "Intel ICH6" }, + { ATA_I82801FB_1, 0, 0, 0x00, ATA_UDMA5, "Intel ICH6" }, { ATA_I82801FB_S1,0, 0, 0x00, ATA_SA150, "Intel ICH6" }, { ATA_I82801FB_R1,0, 0, 0x00, ATA_SA150, "Intel ICH6" }, { 0, 0, 0, 0, 0, 0}}; diff -u sys.orig/dev/ata/ata-pci.h sys/dev/ata/ata-pci.h --- sys.orig/dev/ata/ata-pci.h Wed Dec 8 20:17:38 2004 +++ sys/dev/ata/ata-pci.h Sat Mar 12 14:17:03 2005 _at__at_ -125,6 +125,7 _at__at_ #define ATA_I6300ESB_S1 0x25a38086 #define ATA_I6300ESB_R1 0x25b08086 #define ATA_I82801FB 0x266f8086 +#define ATA_I82801FB_1 0x26538086 #define ATA_I82801FB_S1 0x26518086 #define ATA_I82801FB_R1 0x26528086Received on Sat Mar 12 2005 - 04:40:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:29 UTC