On May 19, 2005 05:37 am, Bjoern A. Zeeb wrote: > thanks. None of the open source drivers I know seem to know that rev. > 0x9 at this time. Really looks strange. Also I could only find > references of that with A8V baords. > > The two postings on Free/NetBSD lists talking about autnoeg/speed > problems. Could you check this? > > http://lists.freebsd.org/pipermail/freebsd-amd64/2004-October/002215.html > http://mail-index.netbsd.org/port-amd64/2005/04/17/0004.html Thanks for the links, it seems many are having the problem across different MB (which are all Asus) on all BSDs. I also found that forcing speed instead of letting ifconfig on auto fixes part of the problem. In fact: clk01a# ifconfig -m sk0 sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 inet6 fe80::211:d8ff:fe44:15f4%sk0 prefixlen 64 scopeid 0x1 ether 00:11:d8:44:15:f4 media: Ethernet 100baseTX <full-duplex> (100baseTX <full-duplex,flag0,flag1>) status: active supported media: media autoselect media 1000baseTX mediaopt full-duplex media 1000baseTX media 100baseTX mediaopt full-duplex media 100baseTX media 10baseT/UTP mediaopt full-duplex media 10baseT/UTP forcing it on 100baseTX (full duplex) : ifconfig sk0 media 100baseTX mediaopt full-duplex And I get no more delays before connection, speed is about 93%(RX) and 63%(TX). which is a great improvement. >From DSLReport. Your download speed : 6162099 bps, or 6017 kbps. A 752.2 KB/sec transfer rate. Your upload speed : 511465 bps, or 499 kbps. This is a start and I suggest that everyone with a sk0 and that problem try forcing it on 100mbps and do some test. I don't want to be just lucky :). Thanks, Nicolas.Received on Thu May 19 2005 - 11:44:26 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:34 UTC