Lynn A. Roth writes: | I have two new Dell Poweredge 850 machines. They have an Intel ICH7 | chipset. When I boot FreeBSD 6 RC1, the controller is identified, but | any drives connected to the SATA ports are not detected. The drive that | is included with the system is a Seagate 7200.7 drive. I also tried a | Maxtor. I can confirm the problem on the PE850. I have it working with my latest 4.X SATA patches (which I haven't published yet). I might be able to look into this. FWIW, I my code these SATA registers in 4.X before the become alive: ata2: Intel SATA P0 status 0 error 4050000 scontrol 0 0 1 ata2: Intel SATA P0 status 113 error 4050000 scontrol 0 0 1 ata2: Intel SATA P0 status 113 error 0 scontrol 0 0 1 ata3: Intel SATA P1 status 0 error 4050000 scontrol 0 1 1 ata3: Intel SATA P1 status 113 error 4050000 scontrol 0 1 1 ata3: Intel SATA P1 status 113 error 0 scontrol 0 1 1 On other Intel controllers they I don't have to acknowledge the errors off the bat. Doug A.Received on Thu Nov 03 2005 - 21:22:53 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:47 UTC