On Wed, Nov 23, 2005 at 11:17:34PM +0100, Christian Brueffer wrote: > On Wed, Nov 23, 2005 at 10:26:01PM +0100, Bernd Walter wrote: > > On Wed, Nov 23, 2005 at 10:01:56PM +0100, Christian Brueffer wrote: > > > On Tue, Nov 22, 2005 at 02:11:23PM -0800, Doug White wrote: > > > > On Sun, 20 Nov 2005, Christian Brueffer wrote: > > > > > Nov 20 02:03:30 haakonia kernel: g_vfs_done():da3s2c.bde[WRITE(offset=383341297664, length=65536)]error = 1 > > I don't know if the offset is in Bytes or sector, but even in case of > > Bytes the second example is at 714G, which is obviously out of disk > > size unless you are using multiple drives, which is not likely for an > > USB drive. > > In my case it is a 400GB PATA drive in an external enclosure. It only > happens with this drive, tried it on two boxes (connection via USB or > FireWire doesn't make a difference either). Damn - I managed to misscalculate the offsets (did /512 once itstead of 1024), but nevertheless it may fit here. The given write is near the end of your 400G drive. You should carefully check your partition sizes - not that your FS is just a few sectors longer than the partition. Don't forget to check the offset + 64k, which marks the end of the data range that the transfer wants to access and check all partition layers (slice, disklabel, etc) about correctness. -- B.Walter BWCT http://www.bwct.de bernd_at_bwct.de info_at_bwct.deReceived on Wed Nov 23 2005 - 22:04:07 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:48 UTC