Re: Build just one module (was Re: [Fwd: cvs commit: src/sys/dev/acpica acpi_cmbat.c])

Mathieu Prevot wrote:
> 
> Le 23 nov. 05 à 15:48, Doug Poland a écrit :
> 
>> On Wed, Nov 23, 2005 at 11:49:20AM +0100, Mathieu Prevot wrote:
>>
>>>
>>> Le 23 nov. 05 ? 03:49, Doug Poland a ?crit :
>>>
>>>>> Nate Lawson wrote:
>>>>>
>>>>>> Here is a patch that should fix the battery hangs on RELENG_6.  It
>>>>>> was tested to work fine, although I need testing from an affected
>>>>>> user to verify it fixes the problem.  It was committed to HEAD and
>>>>>> will be MFCed if it fixes the problem.
>>>>>>
>>>> My Dell C600 is affected by this problem.  I'm running 6.0-STABLE  and
>>>> would be glad to test the patch.  Since I don't run patches  often, if
>>>> someone could point me to a doc on how to apply the patch, I'd
>>>> appreciate it.
>>>
>>> You should think man 'subject', Unix for the impatient or google and
>>> find things like:
>>>
>>> patch -i patchfile filetopatch
>>> patch<patchfile
>>>
>> Thank you, that part is fairly obvious.  What I'm unsure of is  where in
>> the source tree do I apply that patch from, and, must I to rebuild
>> world, or just the affected part of sys/dev.
> 
> 
> Try and see for the patch. 'patch -i patchfile filetopatch' works  from 
> anywhere.
> I don't think you need to rebuild world. I think you can just build  
> acpi module but I don't know how.
> You may glance at /usr/src/Makefile* ...

Look at the path in the patch start.  If it's "sys/dev", then patch from 
your src dir.  If it's "src/sys/dev", patch from above the src dir.  If 
it's just "file.c", then you have to find file.c and patch from there 
(but few people generate diffs this way, it's bad form).

For acpi, then just:
cd /sys/modules/acpi/acpi && make && cp acpi.ko /

Then at the loader prompt:
load /acpi.ko

You don't want to use "make install", otherwise you overwrite your known 
good acpi.ko


-- 
Nate