At 11:05 AM 04/10/2005, Mike Tancsa wrote: >At 04:26 PM 26/09/2005, Jung-uk Kim wrote: > >>Okay. I have a new patch here: >> >>http://people.freebsd.org/~jkim/multicore-20050926.diff >> >>I removed mp_machdep.c patch and added proper multicore identification >>for both AMD and Intel CPUs. I hope this does not overlap with your >>work. Please review/test. > >Hi, > Just got an AMD 3800 X2 to test with. Running just a beta5 > kernel from a few days ago does not see the second CPU and nor does > it with your latest patch Sorry for the noise folks, but its amazing what a BIOS update will do ;) Box seems to boot just fine now and it sees both cores. Over the next week or so, we will place it in our spam / av scanner mix to see how it performs compared to Intel's dual core offering. % dmesg Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA5 #1: Tue Oct 4 10:54:37 EDT 2005 mdtancsa_at_formerly-itx-vpn.sentex.ca:/usr/obj/usr/src/sys/smp Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (1999.79-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x20fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> Hyperthreading: 2 logical cores real memory = 1055850496 (1006 MB) avail memory = 1024147456 (976 MB) ACPI APIC Table: <RS480 AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <RS480 AWRDACPI> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 ACPI-0438: *** Error: Looking up [\\_SB_.PCI0.LPC0.LNK0] in namespace, AE_NOT_FOUND SearchNode 0xc22d2600 StartNode 0xc22d2600 ReturnNode 0 acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pci0: <serial bus, USB> at device 19.0 (no driver attached) pci0: <serial bus, USB> at device 19.1 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02d000-0xfe02dfff irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb0: EHCI version 1.0 usb0: wrong number of companions (2 != 0) usb0: <EHCI (generic) USB 2.0 controller> on ehci0 usb0: USB revision 2.0 uhub0: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfd00-0xfd0f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xdf00-0xdfff mem 0xfddff000-0xfddff0ff irq 22 at device 5.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:14:2a:1a:49:f6 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfddfe000-0xfddfe7ff,0xfddf8000-0xfddfbfff irq 23 at device 6.0 on pci2 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:0a:e6:ff:33:76:4b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:0a:33:76:4b fwe0: Ethernet address: 02:00:0a:33:76:4b fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci0: <multimedia, audio> at device 20.5 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Fast IPsec: Initialized Security Association Processing. ad0: 38166MB <Seagate ST340014A 8.54> at ata0-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1aReceived on Tue Oct 04 2005 - 14:00:42 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:44 UTC