Hello, I've been using FreeBSD 5.4 for a while, but switched to -current to check if acpi support was better for my laptop. With 5.4, my wireless card was working, but it doesn't anymore on -current. I have ndis_load="YES" and if_ndis_load="YES" in /boot/loader.conf, I tried to compile ndis and if_ndis again after regenerating ndis_driver_data.h with no succes. When I plug the card, I see Oct 8 20:17:41 coincoin kernel: cardbus0: <network> at device 0.0 (no driver attached) in messages log. Here's my dmesg: (I've fetched the source on Sep 21 12:48) Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #9: Thu Sep 22 22:47:06 CEST 2005 root_at_coincoin.workgroup:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2395.77-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x400<CNTX-ID> real memory = 536346624 (511 MB) avail memory = 515452928 (491 MB) acpi0: <SONY> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0 pci_link0: <ACPI PCI Link LNKA> irq 9 on acpi0 pci_link1: <ACPI PCI Link LNKB> on acpi0 pci_link2: <ACPI PCI Link LNKC> on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 9 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 9 on acpi0 pci_link5: <ACPI PCI Link LNKF> on acpi0 pci_link6: <ACPI PCI Link LNKG> on acpi0 pci_link7: <ACPI PCI Link LNKH> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon LW RV200 Mobility 7500 M7> port 0x3000-0x30ff mem 0xf0000000-0xf7ffffff,0xe8100000-0xe810ffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xec000000 64MB info: [drm] Initialized radeon 1.16.0 20050311 on minor 0 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xe8201000-0xe82017ff at device 5.2 on pci2 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:46:03:01:49:71:0b fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff irq 9 at device 8.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 08:00:46:80:50:11 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f mem 0xe8000000-0xe80003ff at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pcm0: <Intel ICH3 (82801CA)> port 0x1c00-0x1cff,0x18c0-0x18ff irq 9 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Yamaha YMF753 AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port acpi_sony0: <Sony notebook controller> on acpi0 acpi_sony0: PID 0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: Logitech Logitech USB Keyboard, rev 1.10/12.10, addr 2, iclass 3/1 kbd1 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/12.10, addr 2, iclass 3/1 Timecounter "TSC" frequency 2395765528 Hz quality 800 Timecounters tick every 1.000 msec ad0: 28615MB <FUJITSU MHR2030AT 40BA> at ata0-master UDMA100 acd0: CDRW <SONY CD-RW/DVD-ROM CRX810E/1.5a> at ata1-master PIO4 Trying to mount root from ufs:/dev/ad0s1a pid 39699 (display), uid 1000: exited on signal 11 (core dumped) cardbus0: <network> at device 0.0 (no driver attached) cardbus1: <network> at device 0.0 (no driver attached) cardbus1: <network> at device 0.0 (no driver attached) cardbus1: <network> at device 0.0 (no driver attached) cardbus0: <network> at device 0.0 (no driver attached) cardbus0: <network> at device 0.0 (no driver attached) -- "Any attempt to brew coffee with a teapot should result in the error code "418 I'm a teapot". The resulting entity body MAY be short and stout." -- HTCPCP Spec, RFC 2324Received on Sat Oct 08 2005 - 16:44:49 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:44 UTC