Success, kinda...

From: Joshua Coombs <jcoombs_at_gwi.net>
Date: Sun, 9 Oct 2005 17:36:10 -0400
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
1994
        The Regents of the University of California. All rights 
reserved.
FreeBSD 6.0-BETA5 #0: Mon Sep 19 00:12:45 UTC 2005
    root_at_x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix 486DRx2 (486-class CPU)
  Origin = "CyrixInstead"  DIR=0x2207  Stepping=2  Revision=2
real memory  = 67108864 (64 MB)
avail memory = 56139776 (53 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: IRQ 13 interface
cpu0 on motherboard
eisa0: <EISA bus> on motherboard
mainboard0: <_at__at__at_0000 (System Board)> on eisa0 slot 0
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 1
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 2
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 3
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 4
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 5
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 6
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 7
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 8
eisa0: unknown card _at__at__at_0000 (0x00000000) at slot 9
isa0: <ISA bus> on motherboard
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xdc000-0xdffff on 
isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 
2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16450
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16450
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0
aha1 at port 0x330-0x333 irq 11 drq 5 on isa0
aha1: AHA-1542CF FW Rev. B.0 (ID=45) SCSI Host Adapter, SCSI ID 7, 16 
CCBs
aha1: [GIANT-LOCKED]
ed1: <D-Link DE-220P PnP ISA Card> at port 0x240-0x25f irq 5 on isa0
ed1: Ethernet address: 00:80:c8:da:a6:f0
ed1: type NE2000 (16 bit)
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
da0 at aha1 bus 0 target 0 lun 0
da0: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
da1 at aha1 bus 0 target 1 lun 0
da1: <SEAGATE SX410800N 7116> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 8)
da1: 8347MB (17096357 512 byte sectors: 64H 32S/T 8347C)
da2 at aha1 bus 0 target 2 lun 0
da2: <SEAGATE SX410800N 7117> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 8)
da2: 8347MB (17096357 512 byte sectors: 64H 32S/T 8347C)
cd0 at aha1 bus 0 target 6 lun 0
cd0: <SONY CD-ROM CDU-76S 1.1c> Removable CD-ROM SCSI-2 device
cd0: 5.000MB/s transfers (5.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Logical unit is 
in process of becoming ready

So, my hotrodded 386 is now pushing 6.0b5.  Unfortunatly I toasted it 
pretty bad trying to move from 4.11 to 5.4, so it's a fresh install 
that I'm scrambling to get re-setup.

One thing I noticed in this debacle, when I booted under 5-stable, my 
SCSI card, AHA1 did not report as being stuck under the giant lock, 
yet it is under 6.0b5?  I'm hoping thats the cause of my throughput 
regression.  Under 4.11 I could sustain 1.4MB/sec writing to disc, 
5-Stable held at 1.2MB/sec, I'm now down at 800KB/sec with 6.0b5.  Are 
all the debug options disabled in beta 5, or are they going to stay 
until RC1?

Joshua Coombs 
Received on Sun Oct 09 2005 - 19:40:05 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:45 UTC