Hello, I have booted the latest RC1 boot only iso image from qemu, and it seems we have lost the attachment to ed(4) : % qemu -boot d -cdrom 6.0-RC1-i386-bootonly.iso -serial stdio 6.0-RC1.img OK boot -v SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=0000000000100000 len=0000000007f00000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RC1 #0: Sun Oct 9 20:32:57 UTC 2005 root_at_x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e69000. Preloaded mfs_root "/boot/mfsroot" at 0xc0e69108. Calibrating clock(s) ... i8254 clock: 1113136 Hz 1113136 Hz differs from default of 1193182 Hz by more than 1% [SNIP more device probing] pci0: <display, VGA> at device 2.0 (no driver attached) ed0: <RealTek 8029> port 0xc100-0xc1ff irq 11 at device 3.0 on pci0 ed0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100 device_attach: ed0 attach returned 6 ex_isa_identify() [SNIP end of probing] the ed device is correctly detected and attached in the same conditions from the BETA5 boot-only image : .... pci0: <display, VGA> at device 2.0 (no driver attached) ed0: <RealTek 8029> port 0xc100-0xc1ff irq 11 at device 3.0 on pci0 ed0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100 ed0: [MPSAFE] ed0: bpf attached ed0: Ethernet address: 52:54:00:12:34:56 ed0: type NE2000 (16 bit) ata: ata0 already exists; skipping it .... Cheers TfH PS : qemu is uptodate % pkg_info | grep qemu qemu-0.7.2s.20050909_2 QEMU CPU EmulatorReceived on Thu Oct 13 2005 - 09:31:43 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:45 UTC