Re: PPPoE and Radius on 6.0RC1

----- Original Message ----- 
From: "Marcin Jessa" <lists_at_yazzy.org>
To: <fooler_at_skyinet.net>
Cc: <glebius_at_FreeBSD.org>; <current_at_FreeBSD.org>; <net_at_FreeBSD.org>
Sent: Friday, October 21, 2005 8:55 PM
Subject: Re: PPPoE and Radius on 6.0RC1


> Thanks a lot.
> I recompiled my kernel with the netgraph options and set up the
> server with your configs. Besides from the fact that I only use my fxp0
> in the tests.
> root      787  0.0  0.1  1256   796  ??  Ss    2:41PM
> 0:00.02 /usr/libexec/pppoed -l PPPoE -P /var/run/pppoed.pid -p * fxp0

ok... but i would like to suggest your pppoe clients must be facing the ip 
less interface nic so that clients would not put  static configuration on 
their side to defeat your pppoe configuration :->

> I disabled radius as well adding username and password by
> hand.

without radius does it worked?

> Although the radius itself works fine when I test it with radtest
> and user's credits.
> Just like before, nothing gets loged in ppp.log and the ppp process
> itself never gets started up by the pppoe daemon.

does your radius server supports microsoft chap version 2? my config given 
to you only authenticates mschapv2...


> "on receipt of the SUCCESS indication, pppoed
> will execute exec /usr/sbin/ppp -direct label"
> - This part is not taking place....

actually pppoed did executed ppp.... ppp will exit immediately if it sees 
something wrong with its configuration, authentication and others...

fooler.