In message: <200509111157.48558.kent.hauser_at_verizon.net> Kent Hauser <kent.hauser_at_verizon.net> writes: : Hi, : : I just found that my -CURRENT system won't read dump tapes from my 5.3 system. : : After reconfirming the tape was good on the 5.3 system, I copied "restore" : from the 5.3 system, installed the compat5x port, and it read the tape fine. : : I'm not sure if "restore" or the tape driver changed. I *am* able to read dump : tapes made by the -CURRENT system with the -CURRENT restore. The tape drive : is a DAT72 SCSI drive with an adaptec 29160 interface card. If restore from 5.3 reads it fine, then it isn't likely a tape driver issue. If you run restore -v, can you send me the output privately? Thanks! WarnerReceived on Mon Sep 12 2005 - 02:08:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:43 UTC