Patrick Bowen wrote: > Søren Schmidt wrote: > >> >> On 07/09/2005, at 1:04, Wesley Gentine wrote: >> >>> Dear Colleagues, >>> >>> After I updated my system from 5.4-RELEASE to 6-BETA2 my cdrom >>> device >>> isnt recognized and I received the following message in the end of >>> dmesg: >>> >>> Timecounter "TSC" frequency 2000081623 Hz quality 800 >>> Timecounters tick every 1.000 msec >>> ad0: 38172MB <MAXTOR 6L040J2 A93.0500> at ata0-master UDMA133 >>> unknown: timeout waiting for read DRQTrying to mount root from >>> ufs:/dev/ad0s1a >>> >>> my controller is: >>> atapci0: <VIA 8235 UDMA133 controller> port >>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xa800-0xa80f at device 17.1 on >>> pci0 >>> ata0: <ATA channel 0> on atapci0 >>> ata1: <ATA channel 1> on atapci0 >>> >>> What´s happening? >> >> >> >> You tell me with a dmesg from a verbose bootet system, and what >> CDROM drive you have and where it is connected :) >> Then I'll look into it... >> >> Søren Schmidt >> sos_at_FreeBSD.org >> >> >> >> _______________________________________________ >> freebsd-current_at_freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to >> "freebsd-current-unsubscribe_at_freebsd.org" >> >> > Soren: > > I've notice the same behaviour on my Dell C600. I've attached verbose > dmesg's for -current and 5.4. When I boot 5.4 the CD-RW is found and I > have no problems using it for either reading or writing. I hope > they're useful for you. > > I'd like to say that I have the greatest respect for *all* of you that > work at making FreeBSD the great OS that it is. I just wonder where > you find the time to work on it, what with your day jobs, family > responsibilities and all... > > Sincerely, > Patrick Bowen > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to > "freebsd-current-unsubscribe_at_freebsd.org" > ...My bad...here's the dmesg's (dmesgi ?) Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RC3 #0: Sun Apr 17 09:23:46 UTC 2005 root_at_harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a361a4. Calibrating clock(s) ... i8254 clock: 1193311 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 751707553 Hz CPU: Intel Pentium III (751.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536719360 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000001f6aafff, 514351104 bytes (125574 pages) avail memory = 515547136 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc13e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fbd80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 8 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 16 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 13 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 D 0x62 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 atpic: Programming IRQ9 as level/low ACPI timer: 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.7.0 \\_SB_.PCI0.LNKB irq 0: [ 5 7] 5+ low,level,sharable 0.7.1 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 0+ low,level,sharable 0.7.2 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.7.3 \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 0.1.0 \\_SB_.PCI0.LNKB irq 0: [ 5 7] 5+ low,level,sharable 0.1.1 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.3.0 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.3.1 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 0+ low,level,sharable 0.13.0 \\_SB_.PCI0.LNKB irq 0: [ 5 7] 5+ low,level,sharable 0.8.0 \\_SB_.PCI0.LNKD irq 0: [ 5 7 9 10 11] 11+ low,level,sharable 0.16.0 \\_SB_.PCI0.LNKC irq 0: [ 9 10 11] 0+ low,level,sharable 0.16.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00000860, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000dce0, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD) pcib0: possible interrupts: 5 7 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 3, priority 7785): interrupts: 5 7 penalty: 120 5070 \\_SB_.PCI0.LNKD (references 4, priority 4440): interrupts: 11 10 5 9 7 penalty: 90 90 120 180 5070 \\_SB_.PCI0.LNKC (references 3, priority 360): interrupts: 11 10 9 penalty: 90 90 180 \\_SB_.PCI0.LNKA (references 2, priority 240): interrupts: 11 10 9 penalty: 90 90 180 pcib0: slot 7 INTD routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000840, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base f3ffe000, size 13, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LNKB) pcib0: possible interrupts: 5 7 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKB (references 3, priority 7995): interrupts: 5 7 penalty: 190 5140 \\_SB_.PCI0.LNKC (references 3, priority 760): interrupts: 10 11 9 penalty: 180 220 360 \\_SB_.PCI0.LNKA (references 2, priority 506): interrupts: 10 11 9 penalty: 180 220 360 pcib0: slot 8 INTA routed to irq 5 via \\_SB_.PCI0.LNKB found-> vendor=0x125d, dev=0x1998, revid=0x10 bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base f3ffdc00, size 7, enabled map[18]: type 1, range 32, base f3ffd800, size 7, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKD) pcib0: slot 16 INTA is already routed to irq 11 found-> vendor=0x10b7, dev=0x6055, revid=0x10 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 8, enabled map[14]: type 1, range 32, base f3ffd400, size 8, enabled map[18]: type 1, range 32, base f3ffd000, size 7, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKD) pcib0: slot 16 INTA is already routed to irq 11 found-> vendor=0x10b7, dev=0x1007, revid=0x10 bus=0, slot=16, func=1 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfd000000-0xfeffffff pcib1: prefetched decode 0xf8000000-0xfbffffff ACPI PCI link initial configuration: \\_SB_.PCI0.LNKA irq 0: [ 9 10 11] 11+ low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f8000000, size 26, enabled pcib1: device (null) requested decoded memory range 0xf8000000-0xfbffffff map[14]: type 4, range 32, base 0000ec00, size 8, enabled pcib1: device (null) requested decoded I/O range 0xec00-0xecff map[18]: type 1, range 32, base fdffc000, size 14, enabled pcib1: device (null) requested decoded memory range 0xfdffc000-0xfdffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA) pcib1: possible interrupts: 9 10 11 ACPI PCI link arbitrated settings: \\_SB_.PCI0.LNKC (references 3, priority 820): interrupts: 10 11 9 penalty: 200 240 380 \\_SB_.PCI0.LNKA (references 3, priority 820): interrupts: 10 11 9 penalty: 200 240 380 pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x1002, dev=0x4c46, revid=0x02 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.LNKD) pcib0: slot 3 INTA is already routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0x80000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.LNKD) pcib0: slot 3 INTA is already routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0x80001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024f025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x860 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdce0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffd800-0xf3ffd87f,0xf3ffdc00-0xf3ffdc7f irq 11 at device 16.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf3ffdc00 xl0: using memory mapped I/O xl0: Reserved 0x80 bytes for rid 0x18 type 3 at 0xf3ffd800 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: OUI 0x00c039, model 0x0014, rev. 11 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:04:76:48:c7:b2 xl0: [MPSAFE] pci0: <simple comms> at device 16.1 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 unknown: not probed (disabled) psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x301 0x311 0x301 0x301 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x301 0x301 0x301 0x301 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k vga0: vga: WARNING: video mode switching is not fully supported on this adapter VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 5b 24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 5b 24 b3 00 6f 0d 0e 00 00 07 80 49 8f 8f 28 1f 47 6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 751707553 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on Intel PIIX4 chip pccard1: CIS version PC Card Standard 5.0 pccard1: CIS info: SMC, SMC2532W-B EliteConnect Wireless Adapter, , pccard1: Manufacturer code 0xd601, product 0x5 pccard1: function 0: network adapter, ccr addr 3e0 mask 1 pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel wi0: <SMC SMC2532W-B EliteConnect Wireless Adapter> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 wi0: [MPSAFE] wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) wi0: bpf attached wi0: Ethernet address: 00:04:e2:80:34:be wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <FUJITSU MHS2020AT E/8307> ATA-6 disk at ata0-master ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <HL-DT-ST CD-RW GCE-8080N/2.06> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 1377KB/s (1377KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:00 typ:131 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:19534977 [1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:19535040 l:19535040 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 10001908224 end 10001940479 GEOM: Configure ad0s2, start 10001940480 length 10001940480 end 20003880959 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 1047166976 end 1315602431 GEOM: Configure ad0s2c, start 0 length 10001940480 end 10001940479 GEOM: Configure ad0s2d, start 1315602432 length 268435456 end 1584037887 GEOM: Configure ad0s2e, start 1584037888 length 268435456 end 1852473343 GEOM: Configure ad0s2f, start 1852473344 length 8149467136 end 10001940479 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init Linux ELF exec handler installed Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #0: Mon Sep 12 04:45:28 UTC 2005 pbowen_at_sg1.sgc.org:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b19000. Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0b19138. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0b191ec. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b19298. Calibrating clock(s) ... i8254 clock: 1193297 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 751708637 Hz CPU: Intel Pentium III (751.71-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536719360 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000001f6a2fff, 514306048 bytes (125563 pages) avail memory = 515698688 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc13e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fbd80 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 8 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 16 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 16 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 13 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 D 0x62 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 atpic: Programming IRQ9 as level/low pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 5 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: <ACPI PCI Link LNKC> on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 ACPI timer: 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0xac51, revid=0x00 bus=0, slot=3, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00000860, size 4, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 0000dce0, size 5, enabled pcib0: matched entry for 0.7.INTD (src \\_SB_.PCI0.LNKD:0) pcib0: slot 7 INTD routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[90]: type 4, range 32, base 00000840, size 4, enabled found-> vendor=0x125d, dev=0x1998, revid=0x10 bus=0, slot=8, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x18 (6000 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base f3ffe000, size 13, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.PCI0.LNKB:0) pcib0: slot 8 INTA routed to irq 5 via \\_SB_.PCI0.LNKB found-> vendor=0x10b7, dev=0x6055, revid=0x10 bus=0, slot=16, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 8, enabled map[14]: type 1, range 32, base f3ffdc00, size 7, enabled map[18]: type 1, range 32, base f3ffd800, size 7, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKD:0) pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x10b7, dev=0x1007, revid=0x10 bus=0, slot=16, func=1 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) intpin=a, irq=11 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 8, enabled map[14]: type 1, range 32, base f3ffd400, size 8, enabled map[18]: type 1, range 32, base f3ffd000, size 7, enabled pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKD:0) pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKD agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf4000000 agp0: allocating GATT for aperture of size 64M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xfd000000-0xfeffffff pcib1: prefetched decode 0xf8000000-0xfbffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1002, dev=0x4c46, revid=0x02 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base f8000000, size 26, enabled pcib1: (null) requested memory range 0xf8000000-0xfbffffff: good map[14]: type 4, range 32, base 0000ec00, size 8, enabled pcib1: (null) requested I/O range 0xec00-0xecff: in range map[18]: type 1, range 32, base fdffc000, size 14, enabled pcib1: (null) requested memory range 0xfdffc000-0xfdffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib0: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0x80000000 0x020000a0 0x20040400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.3.INTA (src \\_SB_.PCI0.LNKD:0) pcib0: slot 3 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac51104c 0x02100007 0x06070000 0x00822008 0x10: 0x80001000 0x020000a0 0x20050500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00b11028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024f025 0x00000000 0x00000000 0x01261222 0x90: 0x6064a6c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x0000081b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x860-0x86f at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x860 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER> ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11 at device 7.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdce0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge> at device 7.3 (no driver attached) pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem 0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0 pci0: child pcm0 requested type 3 for rid 0x10, but the BAR says it is an ioport pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcm0: [MPSAFE] lock order reversal 1st 0xc1b0b2c0 pcm0 (sound softc) _at_ /usr/src/sys/modules/sound/driver/maestro3/../../../../dev/sound/pci/maestro3.c:1259 2nd 0xc0926c00 kernel environment (kernel environment) _at_ /usr/src/sys/kern/subr_hints.c:117 KDB: stack backtrace: kdb_backtrace(0,ffffffff,c0938390,c09390d8,c08c4a0c) at kdb_backtrace+0x29 witness_checkorder(c0926c00,1,c0860052,75) at witness_checkorder+0x52c _sx_slock(c0926c00,c0860052,75,0,0) at _sx_slock+0x50 res_find(c0c20a84,0,c1ab056c,c0c20a98,c0a9683a,0,0,0,0,0,0,c0c20a88) at res_find+0x18f resource_find(c0c20a84,0,c1ab056c,c0c20a98,c0a9683a,0,0,0,0,0,0,c0c20a88) at resource_find+0x3b resource_int_value(c1ab056c,0,c0a9683a,c0c20aa8,c1b0b2c0) at resource_int_value+0x32 m3_config(c1b1b000,1,c1af9200,c1b1b02c,c1b1b000) at m3_config+0x3f m3_init(c1b1b000,c1b1b000,0,c1b0b2c0,0) at m3_init+0xba m3_pci_attach(c1af9200) at m3_pci_attach+0x333 device_attach(c1af9200,c1af9180,c1af9200,c1af3c80,c1af3c80) at device_attach+0x58 device_probe_and_attach(c1af9200) at device_probe_and_attach+0xe0 bus_generic_attach(c1af3c80,6,c1ade1a0,1,c0aeae88) at bus_generic_attach+0x16 acpi_pci_attach(c1af3c80) at acpi_pci_attach+0xec device_attach(c1af3c80,c19ce7b8,c1af3c80,0,c1ac1480) at device_attach+0x58 device_probe_and_attach(c1af3c80) at device_probe_and_attach+0xe0 bus_generic_attach(c1ac1480,c1aebb94,c0aeb144,c1ac1480,c0ae7165) at bus_generic_attach+0x16 acpi_pcib_attach(c1ac1480,c1aebb94,0,c0c20c64,c064c8e8) at acpi_pcib_attach+0x160 acpi_pcib_acpi_attach(c1ac1480) at acpi_pcib_acpi_attach+0x20a device_attach(c1ac1480,0,c1ac1480,c1ac1a00,0) at device_attach+0x58 device_probe_and_attach(c1ac1480) at device_probe_and_attach+0xe0 bus_generic_attach(c1ac1a80,1,c0c20cd8,c0ae6c04,c1ac1a80) at bus_generic_attach+0x16 acpi_probe_children(c1ac1a80,404e418,c1ac1a80,c1ac1a80,0) at acpi_probe_children+0x2f acpi_attach(c1ac1a80) at acpi_attach+0x514 device_attach(c1ac1a80,c0b030a0,c1ac1a80,c1ac2300,0) at device_attach+0x58 device_probe_and_attach(c1ac1a80) at device_probe_and_attach+0xe0 bus_generic_attach(c1ac2300,c1ac2300,c1ac2300,c0c20d40,c0648d24) at bus_generic_attach+0x16 nexus_attach(c1ac2300) at nexus_attach+0x13 device_attach(c1ac2300,c08fe4b0,c1ac2300,c08fe4b0,c28000) at device_attach+0x58 device_probe_and_attach(c1ac2300) at device_probe_and_attach+0xe0 root_bus_configure(c0c20d88,c060d0e6,0,c1ec00,c1e000) at root_bus_configure+0x16 configure(0,c1ec00,c1e000,0,c0445a65) at configure+0x9 mi_startup() at mi_startup+0x96 begin() at begin+0x2c pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: ac97 codec dac ready count: 0 pcm0: sndbuf_setmap 7ffe000, 1000; 0xd971f000 -> 7ffe000 pcm0: sndbuf_setmap 7ffd000, 1000; 0xd9720000 -> 7ffd000 pcm0: sndbuf_setmap 7ffc000, 1000; 0xd9721000 -> 7ffc000 pcm0: sndbuf_setmap 7ffb000, 1000; 0xd9722000 -> 7ffb000 pcm0: sndbuf_setmap 7ffa000, 1000; 0xd9723000 -> 7ffa000 xl0: <3Com 3c556 Fast Etherlink XL> port 0xd400-0xd4ff mem 0xf3ffdc00-0xf3ffdc7f,0xf3ffd800-0xf3ffd87f irq 11 at device 16.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xf3ffdc00 xl0: using memory mapped I/O xl0: Reserved 0x80 bytes for rid 0x18 type 3 at 0xf3ffd800 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: OUI 0x00c039, model 0x0014, rev. 11 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:04:76:48:c7:b2 xl0: [MPSAFE] pci0: <simple comms> at device 16.1 (no driver attached) pci0:16:1: Transition from D0 to D3 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] sio0: irq maps: 0x301 0x311 0x301 0x301 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x301 0x301 0x301 0x301 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 751708637 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached acpi_acad0: acline initialization start battery0: battery initialization start pccard1: CIS version PC Card Standard 5.0 pccard1: CIS info: SMC, SMC2532W-B EliteConnect Wireless Adapter, , pccard1: Manufacturer code 0xd601, product 0x5 pccard1: function 0: network adapter, ccr addr 3e0 mask 1 pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel wi0: <SMC SMC2532W-B EliteConnect Wireless Adapter> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1 wi0: [MPSAFE] wi0: using RF:PRISM2.5 MAC:ISL3873 wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) wi0: bpf attached wi0: Ethernet address: 00:04:e2:80:34:be wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery1: battery initialization start battery0: battery initialization done, tried 1 times ad0: setting PIO4 on Intel PIIX4 chip ad0: setting UDMA33 on Intel PIIX4 chip fdc0: output ready timeout ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master UDMA33 ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed fdc0: output ready timeout ad0: FreeBSD check1 failed unknown: timeout waiting for read DRQunknown: timeout waiting for read DRQATA PseudoRAID loaded fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout fdc0: output ready timeout GEOM: new disk ad0 Trying to mount root from ufs:/dev/ad0s2a start_init: trying /sbin/init fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout fdc0: output ready timeout fdc0: input ready timeout fdc0: input ready timeout xl0: link state changed to DOWN Linux ELF exec handler installed battery1: battery initialization failed, giving upReceived on Wed Sep 14 2005 - 23:46:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:43 UTC