At 04:23 AM 14/04/2005, Dag-Erling Smørgrav wrote: >Mike Tancsa <mike_at_sentex.net> writes: > > Any chance someone could champion / commit the fixes in > > http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/79698 and perhaps MFC > > ? Its non functional right now and the patches provided there make it > > work once again. > >ichwd is mine... the PR originator sent me patches a couple of days >ago which I'll test. I have both ICH5 and ICH6 hardware to test on. FYI, ICH7 boards seem to work just fine with the above fixes and the PCI IDs defined. I made a followup to the bug report, but made a typo in the board name. Its actually a 945 chipset, not 925. sample dmesg below Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA4 #0: Thu Sep 15 23:21:18 EDT 2005 mdtancsa_at_formerly-itx-vpn.sentex.ca:/usr/obj/usr/src/sys/smp Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2805.61-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf44 Stepping = 4 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20000000<LM> Hyperthreading: 2 logical CPUs real memory = 1063841792 (1014 MB) avail memory = 1029885952 (982 MB) ACPI APIC Table: <INTEL D945GTP > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <INTEL D945GTP> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 9 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 10 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 2.0 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 uhci0: <UHCI (generic) USB controller> port 0x2080-0x209f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x2060-0x207f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x2020-0x203f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0x509c4400-0x509c47ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x1040-0x107f mem 0x50820000-0x5083ffff,0x50800000-0x5081ffff irq 21 at device 0.0 on pci6 em0: Ethernet address: 00:0e:0c:5d:f8:ca em0: Speed:N/A Duplex:N/A twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0x1080-0x108f mem 0x50000000-0x507fffff irq 22 at device 1.0 on pci6 twe0: [GIANT-LOCKED] twe0: AEN: <twe0: incomplete unit for unknown unit 0> twe0: AEN: <twe0: degraded unit for unknown unit 0> twe0: 2 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048 fwohci0: <Texas Instruments TSB43AB23> mem 0x50845000-0x508457ff,0x50840000-0x50843fff irq 17 at device 5.0 on pci6 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:13:20:00:00:6c:21:46 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:13:20:6c:21:46 fwe0: Ethernet address: 02:13:20:6c:21:46 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0x1000-0x103f mem 0x50844000-0x50844fff irq 20 at device 8.0 on pci6 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:13:20:6c:21:46 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x20b0-0x20bf irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <Intel ICH7 SATA150 controller> port 0x20c8-0x20cf,0x20ec-0x20ef,0x20c0-0x20c7,0x20e8-0x20eb,0x20a0-0x20af mem 0x509c4000-0x509c43ff irq 19 at device 31.2 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 ata4: <ATA channel 2> on atapci1 ata5: <ATA channel 3> on atapci1 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcb000-0xcbfff,0xcc000-0xccfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec Fast IPsec: Initialized Security Association Processing. ad0: 38166MB <Seagate ST340014A 8.54> at ata0-master UDMA100 twed0: <Unit 0, TwinStor, Degraded> on twe0 twed0: 38165MB (78163312 sectors) SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1aReceived on Thu Sep 15 2005 - 15:20:22 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:43 UTC