Poul-Henning Kamp wrote: > In message <20050920110023.GA468_at_ip.net.ua>, Ruslan Ermilov writes: > >>I have the following issues with serial on today's -CURRENT: > > Hmm, my box runs just as fine as always with serial console. > >>2) If booted with -h, as most people are doing, but without >> the recently added -S option to boot2, serial console >> works in 9600 bps as advertised, but despite std.9600 in >> /etc/ttys, the speed is set to 115200. >> >>My configuration is pretty much GENERIC. Rumors are that these >>issues aren't new. > > This is the first I hear about them... > > I won't have time to look at it for the next several weeks > (unless it happens on my machine and forces me to handle it). > I probably should have piped up on -current, but yes, serial console is 'different' after the recent changes went into the boot loader. -P in /boot.config and the following in /etc/make.conf BOOT_COMCONSOLE_PORT=0x3F8 BOOT_COMCONSOLE_SPEED=115200 used to be enough for my boxes to work, but now (of course, only after a installworld for the bootloader) the following in /boot/loader.conf console=comconsole comconsole_speed=115200 seems to be required for serial console to work. -- othermark atkin901 at nospam dot yahoo dot com (!wired)?(coffee++):(wired);Received on Tue Sep 20 2005 - 12:30:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:43 UTC