Re: serial ttys broken?

From: Gavin Atkinson <gavin.atkinson_at_ury.york.ac.uk>
Date: Tue, 20 Sep 2005 16:39:53 +0100
On Tue, 2005-09-20 at 18:30 +0300, Ruslan Ermilov wrote:
> On Tue, Sep 20, 2005 at 07:27:13AM -0700, othermark wrote:
> > Poul-Henning Kamp wrote:
> > > In message <20050920110023.GA468_at_ip.net.ua>, Ruslan Ermilov writes:
> > > 
> > >>I have the following issues with serial on today's -CURRENT:
> > > 
> > > Hmm, my box runs just as fine as always with serial console.
> > > 
> > >>2) If booted with -h, as most people are doing, but without
> > >>   the recently added -S option to boot2, serial console
> > >>   works in 9600 bps as advertised, but despite std.9600 in
> > >>   /etc/ttys, the speed is set to 115200.
> > >>
> > >>My configuration is pretty much GENERIC.  Rumors are that these
> > >>issues aren't new.
> > > 
> > > This is the first I hear about them...
> > > 
> > > I won't have time to look at it for the next several weeks
> > > (unless it happens on my machine and forces me to handle it).
> > > 
> > 
> > I probably should have piped up on -current, but yes, serial console is
> > 'different' after the recent changes went into the boot loader.
> > 
> > -P  in /boot.config and the following in /etc/make.conf
> > 
> > BOOT_COMCONSOLE_PORT=0x3F8
> > BOOT_COMCONSOLE_SPEED=115200
> > 
> > used to be enough for my boxes to work, but now (of course, only after a
> > installworld for the bootloader) the following in /boot/loader.conf
> > 
> > console=comconsole
> > comconsole_speed=115200
> > 
> > seems to be required for serial console to work.
> > 
> Serial console aside, can you PLEASE verify that you can get
> getty(8) working on the first serial port if it is NOT set up as
> a serial console?  That is, with an empty /boot.config and
> default syscons console, can you get a login: prompt on a
> serial port?  I cannot, on neither of my -current machines,
> nor i386 nor amd64.  People I asked around report the same.

In my experience, you need to use:

cuad0   "/usr/libexec/getty std.9600"   dialup  on secure
and not
ttyd0   "/usr/libexec/getty std.9600"   dialup  on secure

in /etc/ttys to get a console on the serial port if you are not using -h
in /boot.config.  I'm pretty sure it's been like this for a long time.

What line have you got in /etc/ttys?

Gavin
Received on Tue Sep 20 2005 - 13:39:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:43 UTC