Le Tuesday 27 September 2005 11:10, Pertti Kosunen a écrit : [SNIP problems with ATA disks] > > I have had same problems with >UDMA100 since 5.3-RELEASE, UDMA66 works > perfectly. Machine boots ok with higher modes, but some disk load > triggers the timeouts. Problems just revisited after upgrade to > 6.0-BETA5 because atacontrol mode syntax changed. > <AOL> Me too </AOL> I've started to see problems with two (relatively old) 10G disks in a RAID-1 (with gmirror). I used to have errors like : ad8: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=9806831 The cure *so far* has been to manually reset the box with the externe "red button" in addition to the command-line "shutdown" or "reboot". (I do not see these errors since I resorted to manually reset the computer at each boot) The disks are connected to a crappy HTP-366 (each is master on its channel). TfHReceived on Tue Sep 27 2005 - 07:31:13 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:44 UTC