Okay. It'll take me a couple of days to respond to this issue, but I *am* aware. Sorry for the breakage. On 4/6/06, David Paul Zimmerman <dpz_at_ack.berkeley.edu> wrote: > I've tried a few different csup's now on my X4100 to get back to a > functioning RAID-1 setup: > > - As mentioned below, a full CURRENT csup on 2006.04.04 produced the > same behavior you saw. An install from > 7.0-CURRENT-SNAP013-amd64-disc1.iso (2006.03.10 snapshot) boots fine. > So those were the two bookends that I worked from. > > - A backdated CURRENT csup for date=2006.03.30.15.00.00 (previous to > the last big mpt change) built fine, but produced equally broken > behavior on reboot. By the time I got to look at the console, it was > scrolling a single mpt error line off the screen, which I presume by > this point in the mpt development cycle is irrelevant. The system > never came back up fully, and forced a backout. > > - A backdated CURRENT csup for date=2006.03.23.00.00.00 (previous to > the last two big mpt changes) built and booted fine. > > So it looks like the big change on 2006.03.25 is where things went > awry. Not surprisingly, the notes for 1.22 say, "Regression testing > with Fusion RAID instances has not been possible." I'm CC'ing Matthew > directly so he's aware. > > dp > > On Apr 5, 2006, at 6:46 AM, David Paul Zimmerman wrote: > > > I noticed a similar thing on my Sun X4100 (LSI1064) after csup'ing > > yesterday. I'll be rolling back to my Mar 10 snapshot kernel when I > > get into work. > > > > dp > > > > On Apr 4, 2006, at 11:54 AM, Pawel Worach wrote: > > > >> Hi, > >> > >> After the recent changes to mpt(4) it seems the driver has some isses > >> with the mirroring configuration (two . This is on a IBM x345 server > >> with a kernel from today. > >> > >> kernel messages: > >> mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem > >> 0xf7ff0000-0xf7fffff > >> f,0xf7fe0000-0xf7feffff irq 27 at device 7.0 on pci8 > >> mpt0: [GIANT-LOCKED] > >> mpt0: MPI Version=1.2.15.0 > >> mpt0: Capabilities: ( RAID-1 SAFTE ) > >> mpt0: 1 Active Volume (1 Max) > >> mpt0: 2 Hidden Drive Members (6 Max) > >> mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem > >> 0xf7fd0000-0xf7fdfff > >> f,0xf7fc0000-0xf7fcffff irq 28 at device 7.1 on pci8 > >> mpt1: [GIANT-LOCKED] > >> mpt1: MPI Version=1.2.15.0 > >> mpt1: Capabilities: ( RAID-1 SAFTE ) > >> mpt1: 0 Active Volumes (0 Max) > >> mpt1: 0 Hidden Drive Members (0 Max) > >> ... > >> mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares ) > >> mpt0:vol0(mpt0:0:0): Using Spare Pool: 0 > >> mpt0:vol0(mpt0:0:0): 2 Members: > >> (mpt0:0:0): Primary > >> (mpt0:0:1): Secondary > >> mpt0:vol0(mpt0:0:0): RAID-1 - Optimal > >> mpt0:vol0(mpt0:0:0): Status ( Enabled ) > >> (mpt0:vol0:0): Physical (mpt0:0:0), Pass-thru (mpt0:1:0) > >> (mpt0:vol0:0): Online > >> (mpt0:vol0:1): Physical (mpt0:0:1), Pass-thru (mpt0:1:1) > >> (mpt0:vol0:1): Online > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: mpt_cam_event: 0xb > >> (mpt0:vol0:0): Physical Disk Status Changed > >> mpt0: mpt_cam_event: 0xb > >> (mpt0:vol0:0): Volume Status Changed > >> mpt0: mpt_cam_event: 0xb > >> (mpt0:vol0:0): Physical Disk Status Changed > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: mpt_write_cfg_page: Config Info Status 2 > >> mpt0: mpt_setwidth: write cur page failed > >> mpt0: Set width Failed! > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: mpt_read_cfg_page: Config Info Status 2 > >> mpt0: mpt_setwidth: read cur page failed > >> mpt0: Set width Failed! > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0:vol0(mpt0:0:0): RAID-1 - Degraded > >> mpt0:vol0(mpt0:0:0): Status ( Enabled ) > >> (mpt0:vol0:0): No longer configured > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: mpt_read_cfg_page: Config Info Status 2 > >> mpt0: cannot get target 1 DP0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> mpt0: IOC Bus Reset Port: 0 > >> SMP: AP CPU #2 Launched! > >> SMP: AP CPU #1 Launched! > >> SMP: AP CPU #3 Launched! > >> <really long freeze here> > >> da0 at mpt0 bus 0 target 0 lun 0 > >> da0: <LSILOGIC 1030 IM IM 1000> Fixed Direct Access SCSI-2 > >> device > >> da0: 3.300MB/s transfers, Tagged Queueing Enabled > >> da0: 34710MB (71087625 512 byte sectors: 255H 63S/T 4425C) > >> Trying to mount root from ufs:/dev/da0s1a > >> > >> Booting an older kernel from around Mar. 25 works fine. Anything else > >> I can dig out? > >> > >> -- > >> Pawel > > _______________________________________________ > freebsd-current_at_freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org" >Received on Thu Apr 06 2006 - 19:39:49 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:54 UTC